If you’re interested in more business related videos I’m starting to publish them for members. In time I plan on have a full selection on how to manage and complete every step of opening and running a business! Join this channel https://www.youtube.com/channel/UCiz21FXLOV65NTgiUfJsxTg/join
In today's video, I'm cleaning up a commercial system at an office in downtown Albany. This is probably the first preventative maintenance it has had since it was installed, and I called a couple of problems before they could become serious for one. The motor was coming loose from its mouth and needed to be tightened up and it needed to be cleaned new filters and new belt. I show it all in this video so come along with me.
Hey guys, this customer has requested that we give this system a once over.
Maybe look for anything that might cause a problem in the summer that's coming. Stay tuned.
I think first I'm going to kill my power and we're going to check on some electronics,
take off panels and filters and get us a water hose over here. My filters are over here.
This coil, this is not very old, but you'll see this little bit of damage.
I'm not real sure how that is happening. We have not used any chemicals on this coil
since it was installed. So let's get to it.
Okay, I think these are 20 by 20s and as y'all can see that coil behind it and he's washing.
So 20 by 22 inch filters. It's dirty. Can y'all see that? I hope there's enough light in here
for y'all to see. What in the world is that? It looks like something did.
Oh, that was insulation. That looked terrible. I'll tell you what, I'm going to go ahead and
take this panel off. I do not have a ton of water pressure. There's not a lot of chemicals
I trust using on aluminum coil like this. One of these micro channel coils. I'm trying to get
where I can blow it down at an angle. I think I'm going to have to use, it's just that dirty.
We are downtown and like the main fire station is down here. Honestly, that's enough of that.
I'm going to, that's the evaporator cleaner, the bifurvac
concentrate. I just want to be able to get this coil a little bit cleaner than what it was.
This is still that evaporator cleaner. I don't like using chemicals on these, but
this is a non-acid cleaner. I don't think it's going to hurt it. The truth is these micro channels
have such tiny openings in them compared to, for the air, compared to regular coils. You almost
have to use chemicals on them sometimes because you can't use any kind of pressure.
Uh-oh, we got some dark clouds heading our way. I am going to spray these out from the inside,
but right now I'm just trying to like get the dust. Man, that is getting me.
Just trying to get the dust and stuff off of it. I spoke to one of their tech people about these
labels and that was basically put there because many cleaners have acid in them and it will
destroy one of these coils. Like I said, you see how this coil's already having problems just from
being a few years old. From the weather, the sun and the rain, you don't want to put an acid on it.
Not only can it do that, it can make it leak. All right, it's time to open up the other side.
I can't get to all of the other side of that evaporator coil through here,
but I can get to most of it. Let me see. And in here I can get to the inside of this cabinet.
I just wish the magnet would work. All right, who's going to crawl in there and get all that
stuff out? I have this spare belt here, A49. All right, something here is loose. Honestly,
it feels like the whole motor is not supposed to wiggle like that. Hold on just a second.
There appear to be some loose connections here.
Right here, you got to see that rust around that. That seems to be a little bit loose.
And of course, the belt is loose, but that is not how you adjust the belt. These are.
Let me see if there's, yep, there's a screw back here. Let's see if there's anything else
that looks loose. I'm going to go get some wrenches and I'm going to tighten that up,
and then we're going to, oh, what I wouldn't give for some ratcheting
wrenches right now. I keep needing to put some in my set. All right, that is good and tight.
Let's see about this one. Oh, that one's a little bit loose too. There's another one back here.
I think I see it. It's already pretty tight.
Now we need to adjust these. You know what? Let's just go ahead and replace this belt.
I've got to go get him some filters. Keep that because I know I got to get filters.
And you see now that one is already adjusted correctly.
I'm just making sure.
Bolts are tight. And as you see, it is not wiggling anymore. So we'll get him a new belt,
new filters. I'm going to go ahead and crank this thing back up and come back and we'll check,
well, let me check capacitors on those condenser fan motors, see if we need those.
Okay, got enough panels on to turn it on. I'll go get him some filters and a belt.
Nope, I got to check these capacitors first. I haven't touched anything live yet.
I'll make sure we do not have power. We do not. Let's short these out. Yes, this is a three-phase
system, but those are single phase condenser fan motors.
Both of these are supposed to be 10s. Is that the microfarad? 10? 10. All right, let's put power to
it. Blower has fired up and this is my blower contactor right here. I know that's hard to see,
3.87 amps. Data sheet is under here, which is unfortunate. There's a chance I have saved it
in my notes somewhere. So let me take a look. Flashing C, that means we are in time delay for
cooling. It's getting a call for cool. We're just waiting for everything to come on.
Okay, let me see if I can pull this up. I can probably get the nameplate from that right there.
17.3 amps on that compressor. That is a three-phase compressor. I'm going to contact my
source where I bought this to see if I can get the data sheet on this. I'm going to save it in my
notes. I just want to be able to read amp draws. If we want to check pressures, it's in here.
I'm going to let that cool dry out. By the time we come back with the filters and the belt,
we'll be ready to check pressure. My nearby and local United Refrigeration has the belt
and the filters. So we're on the way over there. I'm actually racing the rain right now.
We made it just in time. I was just out here a couple months ago for another reason,
water sensor in that thing. I checked pressures in, it was fine. So I'm sure it's doing better
now. But as you can see behind me in here, we just got finished before the rain. I hope you
enjoyed the video. If you did, how about like and subscribe. Check out the store in, I think it's
that corner. And check out the links in the description. If you want to be an ACIQ dealer,
that's a good place to sign up. Catch you on the next one.