Gertie's Top 10 Sewing Tips for Beginners and Self-Taught Sewists

Sewing Tips
238 followers
4 Video Views·Oct 4, 2026
All the things I wish I'd known when I started to sew!
00:00 Introduction
00:37 Pull The Thread Down Through the Needle
01:09 Pay Attention to the Take-Up Lever
02:29 Start with Your Threads to the Back
02:50 Start and Finish Your Seams the Right Way
03:55 End with The Take-Up Lever at the Top
04:14 Only Turn the Hand Wheel Toward You
04:38 Trim Your Threads After Each Seam
05:53 Change Your Needle!
06:41 Find a Good Basic Machine
AI Generated·May contain errors
Video Summary
AI GeneratedGertie shares ten essential sewing tips for beginners to improve their technique and maintain their machines. The advice covers everything from proper threading and stitching habits to needle selection and choosing a durable, high-quality sewing machine.
I'm Gertie, welcome back to Gertie's World.
So this month we have an amazing episode coming for you
later in the month, you are going to love it.
But to tide you over for now,
I'm going to give you my top 10 tips
that I wish I had known when I started sewing.
So my first tip is something that my mom taught me
when I first learned how to sew when I was little,
and that is that you never want to pull the thread
out of the machine this way, okay?
So if you want to change the color of your thread,
what you need to do is clip it right here,
and then pull this side out through the needle.
And the reason for that is if you pull it up that way,
it's going to create a lot of lint
on the inner workings of your machine,
which is going to cause it to need
to be maintained more often.
My second tip is pay attention to the take-up lever.
That is this little silver hook right here,
and I feel like it doesn't get the attention
that it deserves.
When people are having problems with their machine,
they always look at the bobbin, okay?
So especially because the bobbin can cause a lot of nesting
and threads tangling under there.
A lot of times the reason for that can be
that your thread is not properly threaded
into the take-up lever.
So when you're threading your upper thread,
make sure you go down, back up,
and you need to go in and then out on the take-up lever,
and you need to make sure that your thread
is actually threaded through that hole
in the top of the take-up lever.
It's very common, especially when you first start sewing,
you're just doing this really quickly,
you're not sure what you should be looking for,
and that's something you really have to have, okay?
If your thread is not in the take-up lever,
it will create a huge nest in the bottom of your thread.
So I'm gonna keep threading here through my needle,
and we're all threaded.
Okay, my third tip would be that you're always gonna wanna
start with your threads to the back of the machine.
I am guilty of not paying much attention to this.
If you've watched my sewing videos, you probably know,
I don't pay that much attention to it.
But it's a really good idea to have these to the back
and to kind of grasp onto them at the beginning
so that you get a nice, neat start to your seam.
So my next tip involves starting and finishing your seams.
Okay, you always wanna start at the very edge
of your fabric right here.
You're gonna backstitch at the beginning and end of a seam.
When you're stitching, if you have trouble keeping
your stitches straight or your seams straight
or looking at your seam allowance,
I always tell beginners,
don't look at the needle going up and down.
You'll probably make yourself dizzy,
and you'll get off track.
So I'm looking at the line right over here
at 5 1⁄8 of an inch.
Okay, when I finish my seam,
another really important thing is you never wanna sew
without fabric underneath your needle.
A serger is totally different.
You just chain off, right?
But with a sewing machine,
you do not wanna create a chain, okay?
It's not good for your machine.
It creates those tangles
in the inner workings of your machine.
So you're gonna go to the very end,
and if you tend to overshoot,
you can use your hand wheel here.
Then you're gonna backstitch, okay?
And then you can end.
Now, my next tip has to do with the take-up lever.
Again, so overlooked, okay?
You wanna make sure that your take-up lever,
when you end, is all the way at the top, okay?
And that means that your needle is as far up as it can go.
Now, this next tip is related,
which is you only want to turn the hand wheel towards you.
Never turn the hand wheel away from you.
It's not good for your machine.
It wants to go towards you, okay?
So always turn it towards you.
Now, when you're finishing this seam,
your take-up lever is all the way at the top,
and then you can lift up your presser foot,
pull this out, and then trim nice and closely.
My other tip, this is another one
that I avoid all the time and ignore myself,
is that you want to trim
every time you finish sewing a seam.
So I would go back to the beginning
and trim those threads as well.
Again, I am guilty of not following that rule pretty often.
Okay, my next tip has to do with your bobbin, okay?
This is a front-loading bobbin, not a drop-in bobbin.
This machine is very old-fashioned.
So a lot of times people forget
which way to put the bobbin in.
And the way that I,
this is actually the way that I learned to teach people,
not the way that I learned myself,
and I think of it every time I put a bobbin now,
is that you want it to look like a P for perfect, okay?
So the thread should go off to the left of the bobbin,
and it should look like the tail of a P.
So if you forget, remember,
you want to do your bobbin P for perfectly.
Okay, load that in again.
My next two tips have to do with needles.
And the first one is how often
you should be changing your machine needle.
And the answer is way more than you are,
because you need to change that needle
every time you're sewing a different type of fabric.
So let's say you sewed the Peter Pan bolero last month
in a stable knit, and this month you're sewing
the Rita blouse in a lace fabric.
Two totally different types of fabric
that need different types of needles.
So I recommend having on hand
a good selection of universal needles,
Microtex, Jersey, topstitching.
Just next time you go to Jo-Ann's
or your local sewing store, just stock up.
You always want to have a good array of needles on hand
in different sizes as well.
My last tip is a big one.
It's a question that I get all the time,
which is what type of machine should I buy?
And my answer to that question
is to invest in the best quality you can,
or find an older machine with all metal parts.
I prefer a mechanical machine,
like this Bernina I've been using for probably 12 years.
It's a 1008.
I wrote about it on my old blog.
I wrote about when I bought it.
I wrote about it two years later
and why it was still working for me.
And now here we are probably 12 years later,
and it's been a really solid investment for me.
It was expensive at the time,
but I feel like it's really served me well.
Things I like about it are, it's, like I said,
very basic, good quality metal parts
instead of the really cheap plastic machines
that you're going to find at the chain stores.
And you really, for garment sewing,
you really only need a couple of stitches,
a straight stitch and maybe a zigzag.
It's nice to have a good buttonhole,
which this machine does have.
But other than that, you're really just looking
for good, solid quality with your sewing.
You don't even need a computerized machine.
You don't need a ton of stitches.
You just need the basic stitches
and you need them to be done well.
So if you're just starting out,
my advice would be to see if your grandma, your aunt,
someone has an older metal machine
hanging out in their attic or their basement.
Almost everyone does.
You can take it to your local sewing machine service shop,
get it maintained, and it will probably sew so beautifully
and last you a lot longer
than some of the cheaper plastic machines
that end up getting thrown out after a year or two
because they just don't last like the old ones do.
Old ones do.
