Are you tired of spending hours watering your lawn manually? In this video, I show you how to upgrade your lawn care by installing a DIY underground sprinkler system using Rainbird products and a Rachio smart controller. I'll share my experience and provide step-by-step instructions on how I installed the system, including digging trenches, installing sprinkler heads, connecting everything to the main water supply, and installing the Rachio controller. I'll also show you how to use the Rachio app to turn on each zone and test each sprinkler head to make sure everything is working properly. Stick around for my costs and review of the Rainbird products and Rachio controller, including pros and cons. And to help you keep your lawn looking its best, I'll also share some spring lawn maintenance tips.
Disclaimer: Some of the links in this description are affiliate links. If you make a purchase through these links, I may receive a small commission at no additional cost to you. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
⏱️ VIDEO TIMESTAMPS:
00:00 Rainbird & Rachio Irrigation System 00:38 Irrigation System Installation 03:05 Testing the Irrigation System 04:56 Rachio Smart Controller Review 06:53 Basket Drip Irrigation 07:31 DIY Costs for an Irrigation System
The narrator shares his experience designing and installing a DIY home irrigation system using Rain Bird and Rachio. By leveraging free design services and doing the labor himself, he avoided a $14,000 professional quote, completing the entire project for under $2,000. The video covers the planning, installation process, and a seasonal test of the various zones and drip systems.
Hey, are you sick of dragging your hose around the yard?
Put in an irrigation system, all DIY,
using Rain Bird and Ratchio.
I'll show you what I did, all next on Home Pro Hero.
Now today, we're gonna go ahead and fill the lines up
with water and test the system.
But before I do that, I wanna show you
how I built this thing two years ago.
A professional, they wanted over $14,000
to put a sprinkler system in.
No way I'm paying that.
I did it myself, from start to finish, no help whatsoever.
Stick around to the end, I'll tell you exactly
how much it cost me to do it.
First step was, I contacted Rain Bird
and found out they have a free service.
You basically draw your house to scale like I did,
and then they provide a detailed drawing
of what to use to make the sprinkler system
work around your home.
Also included in the diagram is my water flow.
And they make sure your sprinkler heads
can handle the flow that you have available.
On this property, I'm dealing with a well, no city water.
But my well is really, really strong.
I stuck with Rain Bird because they're kinda known
in the industry as being a pretty good company
with pretty good products.
But I'm sure there's other ones out there
that work just as well.
So my yard's kinda big.
Obviously I can't put sprinklers throughout the entire yard.
But I definitely wanted to put sprinklers
around the house part itself.
So I had to buy 150 foot of one inch PVC pipe
to lay the main feeder line from the house.
The feeder line goes into each box.
From the box, there's valves.
The valves connect to a one inch poly pipe.
PVC pipes, more firm and rigid.
The poly pipe has some flex,
easy to move around corners and curves.
I had to rent a trench at the local rental store
to get me down below grade.
It's a pretty easy process.
Thing made easy work of it.
I only had to go down about a foot.
So it wasn't like I was digging very deep.
All my pipe was bought at Menard.
When it came to the heads, the parts, all the fittings,
I used the Sprinkler Warehouse.
Great little company.
Never had a problem.
Got everything exactly the way I'm supposed to get it.
I ran over 200 feet of sprinkler wire.
These wires connect to the valves
that'll eventually connect to the controller.
Controller I'm using is a Ratio.
Think I said that right.
It's an online controller.
I never even touched a thing.
It just sits on the wall with power connected to it.
Everything's done on the app
from the convenience of my phone, anywhere in the world.
Each valve is what they consider a zone.
Each zone has multiple heads based off of flow
calculated by Rain Bird.
I only have two different types of heads in this yard.
You can get a lot of different types of sprinkler heads,
all different sizes, throws.
So the installation of the sprinkler system was fairly easy.
The hardest part was raking the dirt back into the trenches
and grassing over the top.
Of course, I went through a lot of glue and primer
for the PVC pipe,
but the poly pipe is all put on by compression fittings.
All in all, it was pretty easy once I had the diagram
of where I need to put different things.
Rain Bird made that extremely easy.
So installing into the house water system was fairly easy.
The only trick there was
to make sure it has a backflow preventer on it.
And then it just simply tied into the one inch PVC pipe
to the outside valve.
So I have two valves shutting off my system,
one at the water source and one outside the house.
Now that you know my system's been installed
and how I installed it,
let's go ahead and fire it up for the first time this year.
I can give you a little bit more details
on how it all works.
Okay, here's my outside valve system.
Real simple.
The valve at the top controls water from inside.
The valve on the bottom to the left
is actually for the blowout.
That'll always be off all year long
till the end of the year,
and he'll connect his hose and blow out my lines
by turning that valve off.
I've got this little stub that I took out of the ground.
It's the main feeder line.
I got a sprinkler on it now, not a big deal,
but I'm essentially gonna put a sprinkler system
along the back of the smokehouse
because you know, last year I put that yard work in.
So I like to blow the air out of the line,
so I'm just gonna go ahead and turn this head on
because I know this is the last one on the line.
Good start.
We'll let the air blow out a little bit
and then we'll try the other zones.
Okay, first valve, let me show you what I got here.
There she is.
Kind of dirty in there, but it's not bad.
I like to check and make sure
there's no leaks in each valve box.
Sometimes when it's real wet out,
these are kind of full with water.
Not a big deal.
I try to keep the wires as high as possible,
but they all have watertight wire nuts on it,
so it should be pretty good.
Put gravel on the bottom as you've seen in the pictures.
Four valves, let's go ahead and test the first one.
Okay, first one up is gonna be outside north lawn.
Everything seems to be working perfect.
We'll give this three minutes, we'll check the next one.
Okay, that zone was a four head unit, all 42 A's.
So it shoots out up to 42 feet, big area it covers.
Okay, now we're gonna fire up the north inner.
I believe it's four heads also, 42 A's.
Ooh, that's why I got wet on that one.
So far we're in good shape.
Those four are fired up, no leaks.
West front lawn, I think it's five or six 32 A's,
smaller heads here.
Okay, like I talked about, here's my Ratio system.
It's in the garage.
I've got a 16 zone system,
and I believe I'm using only 11 of them.
Here's the cover, tape's off.
There's all my zones coming in.
They all use one wire,
and then each sprinkler head has its own wire.
So if you have 12 sprinkler heads,
you need 13 wires in your jacket.
Okay, all three valves work good in this particular box.
The fourth one is actually irrigation.
We'll talk about that in a minute.
Okay, the other sprinkler box is right here,
right by the hot tub.
So I've got one by the smokehouse,
one right here by the hot tub.
Let's see what she looks like.
So this box, I have two sprinkler head valves,
and then I have one irrigation valve.
Let's fire up the first zone.
This zone has five, 32 A's.
Okay, let's knock out the southeast lawn.
This is a big boy.
I think I got four big boy, 42 A's in here.
Okay, look at this magnolia.
Beautiful, beautiful bush.
One of my favorites in Indiana.
Final box.
Okay, next one we're gonna test is the south lawn.
It's my biggest, I think it's one of my biggest zones.
It's got five, 42 A's.
Pretty much the max of my flow.
Come on, baby.
My biggest zone yet, six, 32 A's.
The max with the 32 A's.
I'll tell you one thing, I love spring in Indiana.
It's the best part of Indiana.
Other than that, the winters are horrible.
We're not even in full swing yet.
Give it another month, it'll be really gorgeous out here.
No sprinklers out there.
All the sprinklers are around the house portion.
From this tree line, all the way around the house.
Okay, the best part about my irrigation system,
what do you think it is?
It's a basket.
Drip irrigation, can't beat it.
I love flowers, my wife loves flowers.
Problem is, no one wants to water them.
I got water ran through the baskets.
You can see them dripping out right now.
All three baskets plus the two baskets in the front.
So where else do I have irrigation?
Let me show you real quick.
Do you guess the smokehouse?
You're exactly right.
Two hanging baskets, irrigation.
Actually, all the plants around here all have irrigation
because I want this to really grow up and look great.
Also have additional flower pots there.
I've got one up here too.
And the final location, what we call the rose garden.
Underground sprinkler system, definitely DIY.
What do I regret?
Absolutely nothing.
What this one cost me?
Pretty simple.
I'm all in for just under $2,000.
Can't beat that.
Save $12,000.
That's why you do it yourself.
For that reason alone.
I love it.
I'm glad I did it and I'm glad it's done.
Hope you liked the video.
If you did, give me a thumbs up.
Make sure you subscribe to the channel
and I'll see you next time.