Fixing a 21 year old system that has been out of commission for months for a Grandmother

Hey guys, today you're riding shotgun while we go take care of a senior citizen. Could not afford a new system, but we're going to get her some air. Y'all can't see this, but this sits down in here like 10 inches. I hope I can get that coil out. Alright, I cut this loose. A bunch of oil came out. And if you saw one of my other videos, you know what can happen if you try to unbraze this when there's oil in the line. so i'm gonna try to cut this out and hopefully i won't have to add a piece of copper just on the street elbow this is my coil replacement look at this end that comes on there i guess we'll cut that off i had a bad experience too long ago i don't think i'm gonna put one i'm fixing a bubble check mine one good thing about putting the dryer in here all my joints are in one spot pulling the vacuum i got things mostly done on the inside i need to put some more armor flex on there but other than that i'm done on the inside i got the drain done everything put back together hot out here is an understatement you know this little fan i got blowing on me last year i was on a job and a customer had a same thing but a rigid and he brought it out for me because he saw how hot i was i think the next day i ordered one of these let's go get a So we got our motor. This lady could not afford a new system. She can't really afford what we're doing today. She couldn't afford it if we used R22. So we have recovered all the Freon and going back with 422B. She walks around with a walker. and um he knows that this system could fail and i warned her that something could fail you know and even this summer and she was willing to she was willing to do it i think on as long as i'm honest with her and i tell her up front that this is a 20 21 year old system i don't know how long this repair is going to last as long as i'm honest up front things will work out all right we want this to turn counterclockwise shaft and lead in rotation reverse this we're gonna check it when we do start up and this takes up 7.5 but that had one of the um multi right this one's got the white stripe my contact if it's off i don't need it on the vacuum for about 15 20 minutes 13 61 I've already done a pound and 12 ounces on that drum so we just need 8 pounds off of