This is the first official part of my series on sewing up a historically accurate cosplay of Gonzo from The Muppets Christmas Carol! And what better place to start with the most common item in a wardrobe of the Victorian era: the shirt. When Charles Dickens published his famous work in 1843, the simple white shirt was such a necessity that it was sold mostly by the dozen or half dozen. But with so much demand, production companies sought ways to keep costs low and turn out high. Which led to problems that sound suspiciously similar to our modern concerns over ethical clothing production.
Charles Dickens himself was known to have great concerns over working conditions in Victorian England and abroad. Having spent some of his childhood employed in a bootblack factory through the workhouse, he was acutely aware of the situation many of the working class found themselves stuck in. One particular group that garnered attention in the early 1840s was that of seamstresses making shirts. They made very little money in comparison to the hours of labor they put in, being paid by the piece. All of their work was still done by hand sewing, often in the home. Supposedly a court case which revealed the dismal wages of women in the workhouse producing shirts brought about an awareness and concern for the conditions of all seamstresses working in that field.
Having timed myself hand-sewing shirts before, I am shocked at the speed at which these garments were produced. It usually takes me at least 12-16 hours per shirt without the help of a machine! I have to admit I did not care to take on the challenge for this particular project and did utilize my machine for some of the long seams and top stitching. As hand sewing faded out, the techniques used to assemble garments began to change dramatically. But as of the mid-19th century most machine work was done to mimic some of the slower hand stitches. And as most of this shirt will not be visible under the layers of waistcoat, trousers, coat, overcoat, and cravat, it hardly seemed pertinent to go the slow route!
00:00 Controversy & Ethics 07:02 Low Wages 11:42 Charles Dickens 16:04 Plans & Patterns 19:17 Construction
Hello everyone and welcome back! This week I am finally officially getting started on the
next historically accurate cosplay, that of Gonzo from The Muppets Christmas Carol.
Now if you don't know The Muppets Christmas Carol, it's pretty simply The Muppets retelling of the
classic story, The Christmas Carol, written by Charles Dickens and originally published in 1843.
And when it comes to doing the historically accurate part, oh, a lot of the work's already
done for me. Despite the fact that this is a Muppet movie, it's fairly accurate. There are
obviously going to be changes made because everything is scaled down into a much smaller
format and it has to fit a fairly weirdly shaped body with noodley appendages. It's going to need
to function differently and fit differently and have different structure. It's going to lose a lot
of detail. So that's where I'm coming in. I'm filling in all of those gaps and seeing what
this actually would have looked like if it had been worn by a human body during that time. Now
Gonzo is supposed to be playing Charles Dickens himself as the storyteller, which is a really fun
concept because you actually have someone carrying you through the story. But also the fact that
while Gonzo is dressed in a fairly elaborate and flashy, almost gaudy ensemble, Charles Dickens was
also well known for being a dandy and well known for being somewhat flashy with his clothing and
loving a really wild waistcoat. So I love the fact that that's actually fairly historically
accurate unto itself. And it really does support the fact that the outfit is fairly accurate. So
in my last video, I dived into a general look at the fashions of the 1830s and 40s for men.
And with this one, we're going to really get nitpicky about each different part.
So there are a lot of parts in Gonzo's outfit that I'm going to have to do. We have shoes,
stockings, trousers, shirt, waistcoat, cravat, a regular coat, and an overcoat, and a top hat to
top it all off. So I don't know how I've managed to take on this much work and thinking I can get
it done by the end of this year, but I'm going to try. And it's going to be fun. So I'm starting
with the shirt because it really is the most important piece in the entire wardrobe. And
that's because everyone had something like this. They had a shirt or a shift. It functioned as
their undergarment. It was something that they had many of because you needed enough to be able
to put it in the laundry after every day. It's your underwear. For men, they generally weren't
wearing a secondary undergarment that was a bifurcated lower body thing. They simply had
a long shirt that they tucked between their legs as they put their trousers on. So this was your
full body underwear. You kind of need to only wear it for a day at most. If you're particularly
sweaty, you're doing hard work, you might want to change it out more regularly. So you're going to
need a lot of these because unlike today where we generally do our own laundry, it was very common,
especially in big cities, to have your garments that needed to be laundered sent to someone who
specifically did laundering. And so you might not get them back for a few days. So you need to
essentially have two different sets, one that you're wearing through and the other that's in
the laundry. And you probably don't want to be doing that every couple of days. So most of the
people are going to purchase quite a few of these. They're sold by the half dozen and dozen
most regularly. You can get individual ones. Obviously sometimes you'll have a need for a
really fancy one or a really fine one that you don't need a bunch of. But at least being able
to buy your everyday shirts in bulk is pretty typical. So it's not uncommon to see people saying
that they have 12 shirts or 20 shirts at this time. And because shirts need to be mass manufactured
in order to meet this demand, there's a pretty interesting system set up by this point. Now
obviously the concept of mass manufacturing that we're used to today includes usually a lot of
machinery and large warehouses full of lots of people doing repetitive tasks where they do one
thing and hand it off to the next person. And that will come for shirts. However, in the 1840s,
we're still dealing with hand sewing only. There are sewing machines being invented, but they
aren't really effective enough or popular enough or cheap enough until the 1850s to really
revolutionize how we're making clothing. So shirts from the 1850s might be very commonly mass
produced in a warehouse by lots of women sitting down at sewing machines. But in the 1840s, it's a
little bit different. Because you don't have to have that sewing machine involved, therefore you
don't have to have a physical location for all of these people to come and do the labor. And I do
have to specify it is mostly women doing this because it is an unskilled labor that does not
require a lot of strength. And it's a skill that both men and women know how to do, but it's a
pretty ideal circumstance for women. Now I do have to specify this is not women making garments for
their own family. That is very, very uncommon still at that time. It's not until we get to the end of
19th and early 20th century where machines and innovations and changes in family structure and
all sorts of things actually give women the free time and the information and knowledge how to make
things like their own dresses. So those things are still being made by tailors and gown makers,
people that had trained for years in order to know how to cut, fit, and pattern. It's complicated.
So women aren't making that in the home. They might occasionally make things like shirts, shifts,
and children's clothings, and accessory items. But usually that is for women that have free time.
It's not usually for women that are doing it out of necessity, because usually it's better for them
to go and try and earn a wage doing something else. So shirts being made in the home is something that
women are doing as a business. It's something that they can do alongside of other things that need to
get done around the home, and it's something that is considered socially acceptable for women to be
as a job. The problem is, not surprisingly, that companies really love to hire women and children
because they don't have to pay them very much. They pay them next to nothing. And the moment I
put shirt in as a search term for newspapers and magazines of that era, it came up with a whole
lot of controversy really fast. Because apparently there was a lot of discussion about the fact that
these women were paid so very little that they could not survive off of that. It might work under
the ideal circumstance of a family who is earning enough money to get by, and a little bit of extra
is desired. But for a lot of these women, they don't have somebody else in the household supporting
them. And they might even have children that they are the sole supporter for. So they're not going
to be earning very much out of this. And it became a huge controversy that was printed and talked
about at great lengths. Before I get into the actual numbers, because I know that the vast
majority of my audience is American, I'm going to have to take a moment to break down the British
monetary system. We have the pound, which is pretty similar in modern day to the US dollar.
And then from there we break that down into 20 shillings to the pound, 12 pence to the shilling,
and because we're going far enough back, we have four farthings to the pence. So summing that up
really fast, if we're talking about a farthing, there are about a thousand farthings to the pound,
and if we're talking about a pence, there are about 240 to the pound. So really basic overview
there. Now these women are usually making anywhere from one to maybe four shirts in a day,
ideally. And these are, if you're making four shirts, 16 to 18 hour days. Some women say that
they work straight through the night in order to manage this, and we're looking at six days a week,
so that's a really long week with a lot of working hours. And they are making, usually,
anywhere from about one to three pence per shirt made. The way this works is that the fabric is
sent to the woman, she makes up the shirt, and she sends it back and is paid by the piece. She's
responsible, however, for thread, needles, and other supplies needed, so she's going to be losing a
bit of money on each one of those shirts, even if she's getting paid out the full three pence per
shirt. So under ideal circumstances, where she's able to focus on this all day, she's able to work
that 16 hour day and get four good shirts made, and she's getting paid that full good amount of
three pence per shirt, that is only 12 pence per day, or one shilling per day. So probably coming
out at six shillings a week, because usually people weren't working all seven days, they took Sunday
off for church and other things. So assuming six shillings a week, what does this mean? It means
it's not much. It's really difficult to actually put value to these things, because our budgets have
changed so dramatically, and how much items cost has changed so dramatically. Food is a lot cheaper
for us now, because we can grow it in a lot easier ways, and we can travel around the world really
quickly and easily. Food is very cheap for us today, whereas we're spending a lot more money on
things like a car, and having to put fuel in it, and pay for electricity, and computers, and cell
phones, and cell phone service, and tv, and all of those things, many of which are absolutely necessary
in our day-to-day lives. They didn't have any of those to pay for, so they had a very different
budget system set up, and things cost a very different quantity. What I'm going to give you
though is the price of bread. A pound weight of bread for a family that would usually be purchasing
one of these a day pretty regularly. Mind you, this doesn't include things like meat, or cheese, or
vegetables, or a roof over your head, or clothing, or anything else, but this loaf of bread in London
around this time would usually come in at one to two pence. So about the cost of what these women
are usually making for one whole shirt being stitched up, and having hand-stitched these
sorts of shirts before, that is... the fact that they can manage it theoretically in four hours just
absolutely blows my mind. I've never managed that. That's just crazy. I don't know how they're doing
this, but that's a lot of work for one loaf of bread. No. So not surprisingly, even people of the era
were pretty shocked that women were earning that little money while doing that much hard labor,
because even though it's not requiring you to do a lot of heavy physical labor, and it's not
requiring a great deal of skill and trade, it is a repetitive task. It's not good for your eyes,
it's not good for your hands, it's not good for your back, it will give you repeated stress injuries.
And they acknowledge this in the time period as well, that this is something that can physically
do damage to the people that are doing that much constant labor for so little. And if it's not
already sounding bad enough, if these women are not able to support themselves or support their
family, they will end up in the workhouse. And if they go into the workhouse, odds are they're
going to be making shirts still. They will just only be earning a farthing per shirt. Remember,
that's one quarter of a pence. So that became a major headline, a farthing shirt, and there were
even like poetry type things written on how poorly off these women were and how terrible this job is
and everything about how little they're paid. So like the Victorians always are, they're super
dramatic about it. But it is a valid thing to be a bit dramatic about because it's pretty terrible
that these women were earning so very little for this labor. A really interesting comparison that
I came across when I was researching Charles Dickens himself is the fact that he actually
went into the workhouse at age 12. His father, who was in the Navy, spent more money than he earned
and ended up in debtor's prison. His wife and some of the younger children joined him there,
but Charles himself was just old enough that he actually went to board with someone. And in order
to pay for boarding, he had to go into the workhouse and take up a job. He worked at age 12
in a boot blackening factory where he put labels on the pots of boot black. He earned six shillings
a week doing this as a 12 year old boy, putting labels on pots. It is a tiny amount of money, but
that is the same amount of money for what was usually a six day work week and about 12 hours a
day that those women under the most ideal of circumstances were earning with their 16 to 18
hour days making four shirts at the best possible payment. So it all sounds pretty terrible and it
is. And this was something that was a major controversial topic at the time because not
everyone did support the fact that like they needed to get paid more money for this. Obviously
the businesses wanted to keep earning a bunch more money because these shirts were being sold
at anywhere from one to three shillings or even more. So we're talking 12 times the cost of what
these women were originally being paid to make the shirt. Obviously a fabric has to be included in
but it's definitely not that much. And these companies wanted to keep that going. They earned
a lot of money off of this and lots of people thought it was good extra work for these women.
It's good to keep them busy and there are a whole bunch of things that tie into issues with how the
poor were treated in Victorian England and the idea that they had to work themselves out of this
and that if you gave them too much money they'd be idle with it and they'd go do stupid things
and they'd be far worse off. You just need to keep them working really hard so you shouldn't
pay them too much. There's a lot in there. But this all really centered around shirts pretty
regularly and it's a conversation topic that didn't go away. There were still issues with
shirts being made by women throughout the 19th and 20th centuries. It's a great example of the
terrible working conditions that came around as we moved further and further into the industrial
revolution. The triangle shirt waste fire for example. That's something that still shows that
even almost a hundred years later things really had improved for the women making shirts. So this
is a big topic of the era and it's something that Charles Dickens was highly aware of because not
only had he lived the experience of a workhouse but he also was a major advocate for the working
class. He was a major advocate for lots of what at that time were very progressive things. In 1842
as he was doing a tour around the United States, this is actually while he was starting to work on
A Christmas Carol, he was also publishing a great deal of writings on the anti-slavery movement. He
was incredibly just horrified by all of the things he saw with slavery. So he wrote about that. He
wrote about all of the economic issues and poverty issues, class issues, and workhouse. I mean Oliver
Twist was written because he had personal experience and the vast majority of his
books were written because he had personal experiences with those sorts of situations and
people. So he was very proactive about this and very outspoken about it. So this is very likely
something he would have been acutely aware of as he was going and purchasing his dozens of shirts.
Because as I said, he was pretty fashionable. So he definitely had quite a few shirts. As most
households did because it was such a necessary item. Because even if people understood the ethical
issues of the production of these shirts, they still needed them. So this is a problem obviously
we're still dealing with today. The ethical manufacturing of clothing and still needing
those clothing items in order to function. Something they were dealing with at that time
as well. And for this reason and many others, the shirt is an incredibly complex and important
garment in the wardrobe. It was obviously a necessary part of the daily life for everyone,
whether they were making these shirts or not. But when it comes to my making of the shirt,
it's a bit of a difficult era because it is a transitional era. Meaning that we are moving
away from the style of shirt that we're used to seeing for say the 18th century with the open
bosom slit, all hand stitched, made out of a fine linen. And we're moving into more and more
cotton becoming available and popular. Mixing cotton and linen in the garments depending on
what's more expensive and the quality of these things. You start seeing changes to the design.
So there's more and more going on in the front area, what we call the plastron section. So pleats
are becoming very popular and common. Sometimes ruffles are or longer cuffs over the hands.
All sorts of changes in style are occurring throughout the 1840s. And since shirts are
something that aren't really easy to put an exact date on, it's kind of hard to know exactly when
some of these changes took place. I can say that shirts in 1843 would have been entirely hand
stitched. And I will also admit to you that what you're going to see in this shirt as I'm making it
is a lot of machine stitching. Because unlike those ladies who were apparently so incredibly
skilled that they managed to get a shirt out in four hours entirely by hand, I can't do that.
I can't. So I did a lot of this by machine because some of these seams would just be long
backstitched seams and they would function the same by machine. And quite frankly, you won't
see them once I have all of my layers on. So I did choose to hand stitch some areas over others.
I also chose to do a cotton rather than a linen because I can find a good fine cotton today. I
got mine from Dharma Trading and it is the cotton broadcloth, which is still commonly used for
shirts today. And I chose that rather than linen because linen is really hard to find that fine.
And it's going to look a little clunky if I'm doing all those pleats in the front,
which is something I decidedly wanted to do. Because I don't have a shirt like that. I do
have a simple late 18th century style men's shirt in linen. I've already got that. I wanted
something different. So I went with cotton. I'm putting the pleats in the front. I'm doing some
of the other attributes and designs that you expect from that. But the construction is still
very, very similar to that of an 18th century shirt. It has not changed dramatically at this
point. For the pattern itself, I based it off of a number of different resources, looking at
original garments that I could find examples of, looking at some drafting manuals of the time.
But there's not very much because most of the drafting manuals are really aimed at
tailors and the clothing that they were making, which they're not making shirts. And a lot of the
at-home things kind of focus more on like night shirts and stuff like that. There's only so much
reference material that I could find for this era. So I wasn't able to find something I could
specifically use. So I kind of made my own pattern and came up with it from there, which I do like
what I came up with. I would amend it slightly. I am also going to take that pattern, digitize it,
and put it up on my Patreon. So it will be available there. It is of course sized to me,
but it's all squares, rectangles, and triangles, so it's not too hard to size up in many ways.
But I really like how this shirt turned out. Just spoiler alert, I am very excited to be
able to actually wear this shirt for everyday life because it's pretty nice. One of the fortunate
things about this particular type of cotton is that it does rip straight across. So most of the
pieces I was able to actually rip out of the cotton to get the straight edge, but some of the
things are angled like the sleeves, so I have to cut those out. I also need to do the cuts to open
up the front of the body. So the T-shape that you see there goes across the middle fold section up
at the top, and then a cut straight down, and this gives us the opening for the neck that we will
shave out later. And for this particular style, I also need a cut down at the bottom of the slit.
That's because this portion will be pleated and gathered up in order to have the decorative front.
The pleats are also drawn in with lines there so I know where to fold and where to stitch.
I started off by doing all of the pleats in front. I believe I have five per side, and they are
around half an inch or so wide. This was just decided by the amount of fabric that I had extra
and what would look right with my body size. The center front edge is then finished off with a
placket. This could be an extension of the actual shirt, but that felt like it was going to make the
body piece way too wide in back and across the bottom, so I wanted to add this placket,
which is done folded towards the front and then top stitched down. Again, if you were doing these
things by hand, it's just being done with a backstitch. So this is mimicking a type of stitch
that would have been used typically there to decoratively hold down and keep all the edges
from rolling back. This top stitching is functional as much as it is decorative.
So there is the finished version where there's plackets on both sides, and those plackets will
overlap and center up in the end. In order to add shape to the neckline, we use gussets rather than
actually cutting a circle into the shirt body. This makes more sense to get over the muscles
around your neck. The gussets are just a square of fabric that is cut diagonally in half to create
two triangles. The edges are folded back and it is top stitched into place. If you were doing this
by hand, you might use a felling stitch on the under portion and a top stitch on the top portion,
but this opening just essentially gets sandwiched in between these two triangles.
And then, in my case, I chose to do a shoulder reinforcement strip that goes from the edge where
the sleeve will connect all the way up the neckline. Again, I'm just top stitching this
as it would have been commonly backstitched across. This is there to help reinforce an
area that tends to get a lot of wear and tear, and to reinforce that corner where the split occurs
and the gusset lines up. When it comes to gathering up the different portions, I chose to do this by
hand because I much prefer the sort of gather I can get by hand and can stitch down by hand than
by machine. Here I am gathering the body portion that will match up to those pleats down at the
bottom. The finishing of this slit at the bottom is then done by way of two little rectangular
pieces that are folded over the edges and felled down. This, again, did by hand because it allows
me to catch all of those gathers individually, and he has a really nice clean appearance.
Both the inside and the outside are done in this manner, so that way the raw edges are sandwiched
in between the two layers. I did end up wishing that I had put the location of this horizontal
cut a little bit lower. While I don't think it's too high for the period, I do wish it was lower
purely because I would like to be able to wear this shirt with more modern clothing and my trousers
don't go up quite far enough to cover all the gathers. So if I was to do it again, I'd do it a
couple inches lower. The sleeve seam is then run, leaving an opening down by the cuff. I am not
putting a gusset in the underarm, so I'm not worried about that there, but this seam would
have been done just simply by backstitch about a quarter inch from the edge. I then will roll back
both of the open sections down at the cuff. I personally prefer the method where I roll one
towards the outside and one towards the inside, and then the rest of the seam gets felled down.
This is just the method that I like to use. There are lots of different ways that you can finish
the section off, including clipping the seam so that way you can roll both of them towards the
inside, or putting a little gusset there in order to close and finish that section off.
This is just my preferred method of rolling one towards the outside, folding it over, and then
actually rolling that entire seam solidly so that way one of them is towards the inside, and it
follows the seam the rest of the way. If I was doing this by hand, I would just simply be using
a felling stitch instead of top stitching by machine. For me, this is just a way that I managed
to finish it off very quickly and not have any raw edges that I need to worry about taking the
time to finish off. The hem of the sleeve then gets gathered up to match with the cuff. Again,
doing this by hand allows me to get a really nice, tight, even gather, and that's especially
important if you have a really oversized sleeve. Mine isn't, but it's a good habit. I will go ahead
and fold back the seam allowances of the cuff, because unlike modern stitching where you apply
right side to right side and then stitch things together and fold them open, most of historical
stitching by hand kind of gets done as a top stitch from the exterior. So I'm folding that back
and marking out where the halfway point is for both the sleeve and the cuff. You can mark out
more points than that if you want to. This just makes sure that your gathers are even, and the
cuff's a pretty small section, so I'm not worried about quartering it and putting it into eighths
or anything like that in order to match it up correctly. And then once it's gathered up, I just
twist the thread back and forth over the pin at the end to hold it in place temporarily until
everything is stitched down. And again, just like the body, the point of this is the fact that I can
go along and fell down this cuff and catch every single one of those little gathers from both the
outside and the inside, and it holds them perfectly into place, and it just looks so neat and clean,
and you can cram so much fabric into such a little space. The other side of the cuff then gets folded
back as well, folded up to those gathers, and like I said, we will fell that down. I will have to deal
with the ends. You could technically do those by machine and then flip the thing, but I prefer,
again, to do this section by hand. I'm already hand stitching around most of the cuff, why not just add
the ends as well. Those get folded back, and then I will just simply do a little felling stitch over
those ends as well. So it's the same sort of stitch that I'm doing the whole way around the cuff as it
is, and it's somewhere between that angular felling stitch and a slip stitch. So this is the final
version. As you can see, one flips to the inside and one flips to the outside, and depending on
which that is, it will be the right or the left sleeve. Next, I am moving on to doing the exact
same thing to the collar that I just did to the sleeves. The only difference here is that because
the collar is in two pieces, it has shaping, I am going ahead and machine stitching it right side to
right side and flipping it correct side out, because it does have a little curve at the front.
Most of the 18th century and earlier shirts that I've seen have just a straight rectangular collar.
You can do that in one piece, fold it over, but as we get a little further in, they tend to have this
little extension and curve in the front, which will have a little buttonhole down in that extended
curved section. Eventually, you will start seeing historically a lot of options for collars where
this little extension is actually a small band, and the larger piece is buttoned onto that band
in order to get the correct collar shape. I also want to note here that I would change up how I
gather around the neckline. I don't like that I had to gather the gussets, and instead I would
rather gather across the back into those gussets next time. I'd rather run those gathers across the
back there, and I would make that change the next time so it looks a little bit cleaner.
Now having finished the collar, I then move on to inserting those sleeves. Like I said, they are a
more narrow style, so I'm not gathering the sleeves into the body of the shirt, nor do I have an
underarm gusset. Then we're going ahead and doing up the side seams, no different than I did up the
sleeve seams. So those will get turned and fell down, and the bottom opening will get done in the
same way. The raw seam that you have around where the sleeve and the body meet gets dealt with by
way of a facing. This can be a very narrow band, about one inch like I'm doing, or it can be a very
wide piece. If you are someone that tends to wear the shoulders and chest area and back of their
shirt a lot, this is where having that extra layer can be really, really helpful. Again, I'm going in
by hand and felling this down, because usually you don't see this top stitch. It's just sort of a
prick stitch through the outside, and I'm trying to mimic most of the stitches that would have been
done historically. This little facing extends down over the seam a bit, just to cover up that little
corner at the bottom of where the bottom of the sleeve or the bottom of the gusset matches up with
the body. Again, these facings are not only for finishing off the seams, but also for that extra
reinforcement, so they really are necessary. The very bottom of the body is just turned and hemmed.
I do find some references that say that they like to make the front of the body a little bit shorter
than the back, so keep that in mind early on if you're patterning things out and deciding where to
cut your slits, or you can simply trim back the front edge a little bit. Another place to put a
little gusset is at the bottom of the body. This is because this area gets a fair amount of stress
as we're tucking the front and the back between the legs and pulling the trousers up over it,
so this is an area that is good to have a little bit of reinforcement. Most of the time I see this
version, where there's a folded over square that turns into a triangle, and then it is just applied
to the interior, and it's felled down, top stitched down, you can fold the corners in to keep them
clean there, however you want to finish it off. Sometimes these are right up against the edge,
like I'm doing, where they're only set about a quarter of an inch in. Sometimes they're set at
an angle completely different than the actual body, and are just this little triangle that sits
over that split at the bottom for reinforcement. I'm personally just top stitching from both the
exterior and the interior, so that way it's got two lines of stitching holding it down and
reinforcing it. Again, this is just a matter of strength. Then we move on to the buttons and
buttonholes. The front can have as many buttons and buttonholes as you feel is necessary. Obviously,
one up at the collar, and I decided to just put two along the chest, but more than that is also
fine. Those are vertical buttonholes for the chest portion. For the cuffs, you just make sure that the
buttonholes are on the top side of your cuff, and match up with the size of your button. You don't
want them much larger than your button, simply because it makes it too easy for them to pop out,
especially with those vertical buttonholes in the front. There are lots of different ways to
finish off your buttonholes. I'm choosing to do bar tacks at both ends, because I like the visual
nature of that, but rounding off the ends is also really common, especially on shirts, though I don't
think I've seen any keyhole buttons done on shirts at this time, though the keyhole button is coming
into play around this era. I also don't have any reinforcements in the cuffs or the collar. I could
have put some sort of interfacing in there, but I don't find it necessary in the case of this
particular textile, and a little bit of starching can go a really long way in giving me stiffness
that is going to make more sense than putting a whole heavy layer of interfacing in between.
I'm just matching up where the button needs to sit. Most of the buttons that I've seen on
older shirts tend to either be thread buttons, shell buttons, something really simple. The
two-hole button is definitely the more common version that I've seen on older shirts.
I have yet to see a four-hole button used earlier than probably mid-19th century, but again, this is
not something I've really researched, so don't take my word on that. This is just something to
pay attention to. I do actually have a three-hole button in my collection, as well, of antiques.
I don't know how that's supposed to work, but it fascinates me greatly.
So I just went with a two-hole little shell button. These are modern buttons that you can
regularly get, so I don't have to worry about accidentally damaging an antique as this goes
through the wash, so it's pretty easy to replace. And I did put a little bit of a thread shank on
just to deal with the bulk, since it is such a flat button.