How to fix a flat tyre by yourself

Adventure Ride Experience
9 followers
7 Video Views·Sep 25, 2026
I'll show you the most effective way to suspend your bike on the side stand and the most efficient way to fix a flat tyre by yourself. We're using the 2022 Tenere 700 for this feature, as it is a good representation of an Adventure motorcycle, which like most modern bikes does not have a centre stand.
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a practical guide on how to change a flat tire on a motorcycle (specifically a Yamaha T7) while in the wilderness. The presenter demonstrates a clever \"bush workshop\" technique using a simple strap and a tree to keep the bike stable and freestanding without a professional lift.
Axle out, wheel out, not magic just logic. Welcome back everyone it's good to be home on the farm
in Australia on a T7. Yeah awesome it's good to be home after four months in Europe
and cool that Yamaha Australia hooked us up with this T7, better not send this one too hard.
T7 at boost town, not today, not on standard suspension anyway. Yeah so the first
feature I want to do for you guys is show you how to fix your own flat tire
by yourself in the bush and I'm actually legit trying to pop it, I probably shouldn't
but I am. Boo hoo, just got a flat tire, whatever will I do. Basically the first thing you should do
when you get a flat is chill out, don't be in a rush to puncture your new tube that you're about
to put in. Right while the bike is upright and you're not juggling a elevated wheel, hook in
and loosen all of the bolts that you need to undo to get the wheel out. Rather than
take all this mud guard off it's easier just to drop the caliper. So that's out, right now I've
got to crack the axle, got my little gadget here, just get that axle loose. It's going to feel tight
under the weight of the bike but that's ready to go, that'll come out by hand once it's elevated.
Now let's make the magic happen and the magic happens thanks to like a four or five dollar
strap from a hardware wherever and then of course tire levers and what else have I got in here,
a bit of a zip tie supply, just get that out the way and of course pump, gas bottle,
little gas bottle valve. So for this to work you want to get the bike nice and tight with the side
stand in at the center of the tree and just kind of face the the front wheel out 45 degrees. Then
it's just a matter of grabbing your strap, your two meter strap from the hardware, feed this
between the bar clamps and go around the right hand bar clamp and back because what that'll do
is keep the bars crossed up and your wheel facing outwards and it's just a more stable anchoring
than letting it float in the middle. It can take a bit of tension but pretty much ready
and then from there it's just a matter of grabbing the front wheel, grab the strap,
lean into it, lift the bike and just torque it and you now have your ready-made bush workshop
and nowhere is this bike touching the tree, it's just poised. The T7's got a pretty substantial
side stand so she's just going to sit pretty while you get the job done. Axle out, wheel out,
there we go. Not magic, just logic. A freestanding motorcycle, front wheel out,
on the side stand. All you need is a tree or a fence post. One thing that's good is just to
put a little cloth down just to keep this out of the bearings and the spacers. It's good to do it
in the dirt, that just pushes in and doesn't bend anything, you know, soil gives. Right,
best advice I ever got, start at the valve, finish at the valve. So make sure the bead's
popped both sides, if the back side isn't broken, flip it over and push that off the
bead too. See that, see that just release? Right, you're just going to make it easier on yourself
if both sides of the bead are off because then when you get your knees in there like that you
want to push that bead right into the valley this side and it just makes it a hundred times easier
to get the lever in. And you use these little, these are the best because you use these
these little lips there and you just hook them in. Don't get too greedy, just about that that
wide's good. One, two, and just wriggle that out, take another bite, just go easy. I'm being
gentle here because I haven't actually popped the tube so I'm going to reuse it. If you've
popped the tube and you've got a spare, just jam it in there and rip the sucker out. Once you're
there you don't even need the levers, you can actually just get your fingers in there, pull
the tyre off, right, pull it up, you've got full access to the valve, there it is, so just go around
to the valve, flick it out, right, there's my tube, I'm not going to use my spare because I don't need
to, and then easiest way I'll show you, just poke the valve in there, get the rest of the tube in,
this, oh, see that, that there, it's a perfect amount of air, you want about that much air in
it just to keep it, because what happens is if you put in floppy it can fall against the
bead and it's easier to pinch, risk pinching, so that just sits in there and the tyre, it just
swallows up into the valley, right, now get your valve stem and hole and try and show you this here,
right, there's your, there's your valve hole, my valve's in there, literally just get your fingers
up on the inside and then this side, right, you can lift that up and see that little valve in
there, it's right, it's a piece of cake, just poke it up, get your fingers in there,
and get rid of that now, pull the tyre away, poke it through, see that, put your valve cap on like
that, and that just stops it pulling through, now again, same thing in reverse, you want to
finish the valve, put the valve away from you like that, the same distance you started with,
just pick that up, you can see that it's not, that it's clear of the tube,
so put that in, get your knee into there, take one out, go equal distance away,
we're on here, boom, boom, now get your both knees in and push that
right into the valley, now just work with one lever, just take your time,
start working towards the valve, take your time, piece of cake,
just give it a little knee in there like that, and then start taking very small
bites, let's take small bites here, all that's coming out,
nearly there,
you can flip it over and there's less chance of pinching anything,
don't even go all the way, if you go, you don't have to go all the way down, because then you
risk pinching the tube, just hit the thing, done, right, so pump, little valve tool,
gas cylinder, I've had this forever, it's time to go, is it going to be a dud?
Or is it going to work? Tap is closed, everything's tight, I reckon we've pierced it,
okay, we're ready to open the tap, wow, that had some pressure, more than I was expecting,
lucky I pushed it back on, you know what, if I hadn't let that blow off, that would have been
good to go, but as it is, I've got at least 18 pound in there, I reckon,
I mean, I could ride away on that, the bead is out on that side, just a little bit here,
let's see if I can crank it out with the hand pump, work out, I tell you,
nah, that's good, back on the trails, back to boost town with that pressure,
job done, one thing, just in case you've bumped the front brake lever,
just give these calipers a little flare with the fire lever, right, make sure your ABS ring
is on the right with the magnet, it's all on the one side, another reason to do everything on the
one side, drop that one caliper, when you're lifting the bike up, the best thing to do
is just to get the wheel, like, no more than a boot height off the ground, because slot that in,
get your boot under, line up the disc, that's in, that's in, just control it with your foot,
axle through, so start that with your fingers, just so you know the thread's not bound in any
way, it started perfectly before you crank into it, this is the most important part of getting
your front wheel in, is remembering to do your axle up all the way home, to lock all spaces against
the bearing and pull the whole thing home, I mean, people are going to start talking torque wrenches
and all that, but if you're a dirt bike racer, especially enduro, the amount of wheels you've
done up in race conditions and different bikes and brands and, it's got to be tight, you know, like
with that leverage, that's good, everything's home, it can't go anywhere, nice, right, next,
let's get the other caliper on, take your time, eye it up, you don't want those pads to dislodge,
so that's just sitting pretty perfect,
okay, one,
all right, again, it's up to the rider, don't take my word for it,
if you feel comfortable getting a torque wrench, do it, I like that, and
I like that, right, calipers are done, axle's tight, last thing,
are the pinch, is the pinch bolts on this side, but leave that to the very end, right, when you
drop it back, it pays just to come around this side, don't do it from that side, in case when
you release it, it falls off the stand and comes away from you, you've got better control here,
and then just crack the tie down, done, whoops, pump the brake, don't forget to pump the brake,
right, I always like to give the fork a good crank, down, and then don't forget to nip up
these pinch bolts, seated nicely, I just like to get those even, again,
get a torque wrench if you're not confident, but yeah, job done, awesome, I hope you enjoyed that
guys, really looking forward to putting in some big Ks on this Tenere 700, I do like these things,
they really are a good starting point for anyone that has an off-road background and wants to get
into the, you know, the real adventurous adventure game, this is a great platform to start with,
sure the suspension can be a lot better for the rides that I do and the way I like to ride,
but that's all projects to come, in the meantime, what I'm going to do next in complete standard
trim is set the bike up for an epic adventure, you know, like multi-day camping, and I want to give
you guys a bit of an insight into how to pack lighter, the majority of the people around the
world on adventure bikes are just on overloaded death traps and it's got, it does my head in
as to what it is they've even got in there, so that's coming up next, so check out this video
right here, and yeah, plenty more to come, and don't forget to subscribe
and all that stuff, hit the notification bell, and yeah, thanks.
