USS Titan-A Explained: Everything We Know About Star Trek's New Ship!
Sep 18, 2026
AI Generated·May contain errors
Star Trek Picard season 3 trailer showed the Next Generation crew reuniting, as well as
a new ship called the USS Titan A that was featured in the trailer.
709 is a commander, finally joining Starfleet on the ship.
We have some new details in regards to this new ship, and it's confirmed that it isn't
the Titan Will Riker commanded in Star Trek Nemesis.
However, they do share a common connection.
Ready to see the new USS Titan?
Keep watching till the end of the video before you'll be amazed.
After the loss of the Luna-class USS Titan, the new Constitution-class was likely to come
into service.
With a USS Titan A in the ranks, this may have been another reason why Captain William
T. Riker and his family retired to Nepenthe in 2391 after losing the Luna-class Titan.
With the Constitution III class, known in Starfleet as the Neo-Constitution, Starfleet
was nostalgic for ships during the Excelsior, Reliant, and Constitution refit eras.
Starfleet's standard configuration included a saucer section, a secondary hull, and two
warp nacelles.
It is likely that the new class was called the Neo-Constitution because the saucer was
so similar to that of the Constitution refit.
There was a bridge module on top of the saucer and a sensor array underneath the saucer.
In contrast to the saucer section of the Constitution refit, the bridge module was not a single
structure at the top of the bridge, but extended to the saucer section and attached to the
impulse engines located at the rear, similar to numerous other Starfleet ships.
Two cutouts were located on the front of the saucer, which have no known purpose.
Two impulse engines were situated on the rear of the saucer inside a cutout on the rear
of the saucer.
Two sets of torpedo launchers appear to be located at the aft of the neck, although they
may serve other purposes as well.
Compared to the Constitution, the secondary hull is shaped more like the Excelsior.
It's also cylindrical, as you'd expect.
Still curved, but rectangular.
However, the lower section of the secondary hull curved towards the center classically,
giving the ship a Starfleet-like appearance.
As a return to the classics, Titan Zay's main deflector dish is recessed into a secondary
hull for more protection.
But it is a standard circular design.
The Constitution-style hangar bay door, with the words Titan on the back, houses the shuttle
bay at aft of the secondary hull.
Pylons connect the Titan's nacelles to the secondary hull.
The nacelles themselves have orange bassard collectors, similar to many ships of the 25th
century.
Despite this, the nacelle structure is unique, featuring a sloping front and a tapering rear
with blue glowing highlights near the bassard collectors, and then a strip near its rear.
Featuring Sagan-class corridors and a bridge, the ship's interior was very similar to that
of other Starfleet ships of the 25th century.
This bridge module is also included on the Titan, so we can approximate its length roughly,
which would be about 530 meters.
Despite being as big as the Sagan-class starship, the saucer's windows are the same size as
the Constitution refit's windows.
Most Federation ships from the 24th century had carpeted corridors, but this ship has
very clean corridors.
As the corridors are the same as the Stargazer, some corridors are equipped with a weapon
rack similar to those on the Sovereign-class starships.
While we haven't seen the Neo-Constitution-class turbolifts, they are very similar to the
Stargazer-class turbolifts, which were quite spacious, with terminal screens around the
walls showing the ship's visuals, handlebars in case of emergency, and even retina eye
scanners.
As with the U.S. Stargazer's bridge, this one is very sleek, with a central command
chair and two chairs of senior officers on either side.
It's a setup that's on most Federation starships.
The central captain's area has stairs.
Four control consoles are available for the helmsman and navigational officers, which
have holographic foot controls.
Various displays, from dilithium articulation frame status to communication systems, are
mounted around the room.
In addition, there are two standing consoles at the bridge's front and two at its rear,
both with a transparency display.
In the 25th century, the primary ODN manifolds were upgraded.
Daystrom's M47 Quadtronic processor is called the ODN manifolds, obviously better than the
M5 Multitronic processor in the Ultimate Computer.
In Titan Systems, BioNero gel packs are also to be used, incorporated into dynamic isolinear
chips, enabling higher storage reliability, faster speed, and intuitive processing.
Using Holographic Reconstruction Generators, HRG, the bridge's viewscreen displays 3D images
of space, data, and information.
As needed, the blast shield can cover the opening, making it transparent.
As a result, it's both a window and a screen.
These starships would have crew quarters, sickbays, mess halls, transporters, holodecks,
etc.
Neo-Constitution is active in the 25th century, so has access to the latest technology.
The propulsion system could use quantum slipstreams and fast warp travel.
Weapons include Hotan torpedoes, phaser arrays, quantum torpedoes, and shields.
There you have it!
Thank you for watching and see you in the next video!

