Swanky 70s Cars: 1977-78 Oldsmobile Toronado XS & Its Huge Rear Window!

RC- Car
12 followers
AI Generated·May contain errors
Many of us know the Oldsmobile Tornado and that it was introduced in the 1966 model year
by Oldsmobile. It was Oldsmobile's first front-wheel drive vehicle and also, I believe,
the first one for General Motors, though not the first front-wheel drive vehicle that had
been produced by any automaker. A number of automakers, including Cord and Citroën,
had produced front-wheel drive vehicles before the 66 Tornado, but it was kind of a rebirth of
front-wheel drive and automotive technology and made GM's rocket division a leader in technology.
That first-generation Tornado lasted from 1966 to 1970, and by that point,
it was getting a bit long in the tooth and it was time to refresh the Tornado.
One other thing about it was that the Tornado really wasn't all that successful commercially
in its first generation. It didn't sell all that well, especially after the first model year.
Often with sales in the 20,000 to 30,000 unit range, and that simply was not enough to justify
having a dedicated platform for the car that really shared no components with other platforms
at General Motors. When GM decided to redo its e-body platform for 1971 across the Tornado,
Riviera, as well as the Eldorado, it was determined that all three cars were going
to share significant components with the full-size General Motors e-bodies, including the front glass,
A-pillars, roof panels, as well as the door glass, inners, and many pieces of so-called black metal
that were not readily visible to the eyes. In other words, sheet metal that was not the exterior
surface sheet metal that you would see. The next-generation Tornado, the second generation,
ran from 1971 to 1978 and was much more commercially successful than the first generation,
selling more units per year than the first-generation Tornado, and also because it
shared so many more components with the full-size General Motors vehicles, it was more profitable.
As I mentioned, the second-generation Tornado was introduced in 1971. It was an overall handsome
design, if not kind of a copy of the 1967 Eldorado in many cases. Take a look here at a side view
of a 1971 Tornado and juxtapose that with the side view of a 1967 Eldorado, and you kind of get
the point that I'm making. But in its waning years, 1977 and 1978, Oldsmobile decided to do
something a little bit different with the Tornado and give it some pizzazz, and that birthed the
Tornado XS. The Tornado XS was actually a derivative of the Tornado XSR, a vehicle that
Oldsmobile fully intended to produce, but I believe only one was actually made. The XSR was effectively
an XS, but also with T-tops, where the roof glass panels would stow on the inner portion
of the T-top. It was an overall novel design. I believe that there were two or four Eldorados
also made with a similar roof configuration by American Sunroof Corporation, or ASC. ASC was,
by this point, becoming a powerhouse in the sunroof installation business, and often
installed sunroofs for manufacturers like General Motors as well as Ford, and it was run by a
gentleman by the name of Heinz Prechter. ASC was around for many years installing sunroofs with
factory-level quality, and many of them still work just fine today. But one of the things that didn't
work were those T-tops. They just couldn't get them to fit right so that water wouldn't intrude
in the cabin and have no wind noise issues as well. And so, for production, the T-top design
was scrapped, but this awesome wraparound rear glass was kept. The wraparound rear glass was
developed by PPG, or Pittsburgh Plate Glass, and it was done through a process called a hot-bent
wire. There was effectively a wire that was placed on two sides of the glass, and the glass was bent
around it in order to form those kinks that you see in the rear backlight. This process was used
on some other GM vehicles of the time, including, in fact, the 1967 Eldorado and the 1977 Caprice
Coupe. So it wasn't totally novel when it came out in the 1977 Tornado XS, but this is a tremendously
large backlight on this vehicle. I don't even want to know what it would have cost to replace
back in the day, and I'm guessing that they're pretty priceless today and very hard to find.
The Tornado XS was really Oldsmobile's top-of-the-line vehicle then for 1977 and 1978,
and it certainly was quite expensive. Despite the fact that the XS only came with power moonroofs
as opposed to the T-tops, it was still priced at $10,700 in base price. This is before
all the options got added on. That would be equivalent to about $70,000 today. Pretty pricey,
and about $2,500 more than a Tornado Brougham. It's probably because of this very steep base
price that was pushing into Cadillac territory. Oldsmobile only sold about 3,000 of these Tornado
XSs in 1977 compared to around $30,000 for the regular Tornado. In 1978, sales of the Tornado
XS slipped even further to about 2,500 units. Again, part of this was probably the price
associated with the vehicle. Now, in addition to that rear wraparound glass, the 1977 and
1978 Tornado XS had a number of interesting features as well as design elements. Let's
talk a little bit about them now. First, if we start out back, we see not only the rear backlight,
but underneath it, those high-mounted stop lamps that were introduced on the 1971 Tornado. This
was not the first American car to have these high-mounted stop lamps. As an example, the Ford
Thunderbird had high-mounted stop lamps optional in the previous model year, but this was the first
for the Oldsmobile Tornado and other General Motors vehicles would pick it up, like the 1974
Riviera, for example. But you have this distinctive vertical theme and kind of a bit of the four
fender theme as well. Notice that rear fender is started right where the vinyl top transitions to
the backlight and goes all the way back, and you also pick up that front fender theme that begins
partway through the front door. Of course, this rear also has a heavy vertical taillight emphasis.
Again, I mentioned that the second generation Tornado took many cues from Cadillacs,
this being one of them, although the primary stop lamps were not in those fins. They were horizontal
on the decklid or just below the decklid. You also see huge rear bumper fillers on this car. Remember,
by this point, there was the five-mile-an-hour impact standard front and rear, and these
Tornados are infamous for those bumper fillers degrading. There's a huge filler between the
rear quarter panel and that chrome cap, if you will, as well as the bumper, and they often are
seen degraded and in horrible shape. Another Cadillac design cue here is that squircle-style
wheel opening. That was something that many Cadillacs, except for Cadillac Sevilles,
would show, including the 1967 to 70 Eldorado. Up front, you have a very prominent nose that's
perhaps blunted a bit because of that five-mile-an-hour impact standard for the bumpers.
The bumper, you can see here, is pretty huge. Large cornering lights, and you kind of have a bit of
that coffin nose up front, as well as in the rear, if you look at the decklid, perhaps an homage to
cord, given the front-wheel drive nature of these vehicles. For those who are interested, the 1977
Tornado can be told from the 78, in part because of the egg crate grille that you see here up front.
This is a 1977 model. In 1978, the Tornado would transition to vertical thin bars that you see here.
Aside from that, relatively little was changed between 1977 and 1978. Let's take a look at the
interior for the Tornados during this time frame because I think it's pretty sweet.
On the Tornado XSs, you got this so-called loose-cushion look that Oldsmobile pioneered
in the 1972 Oldsmobile 98 Regency, and it had made its way to the Tornado line by this point.
You get cloth or leather in your Tornado XS, but you always got these hyper-poofy seats.
Notice, as well, that this car has a perfectly flat floor owing to the front-wheel drive,
and that floor mat is a single-piece floor mat. It's one piece. I know that GM did that to kind of
have some novelty. It's actually pretty hard to get in and out of the car if you're trying to
clean it. I guess they supposed you would just vacuum it in the car, but if you do want to get
it out, it's pretty gosh-darn heavy, too, and I think they ended up transitioning away from that
in future years, although even the next generation Tornado Riviera and Eldorado,
as well as the Seville, had a single-piece front floor mat. Here is the rear seat area of
this Tornado, and you'll notice that the rear seat isn't trimmed all that nicely,
but you do see the rear backlight, and I would guess that it's a pretty toasty place to be back
there if the sun is beating down on you, because there's not much to protect you from the sun,
aside from the solar-ray glass, but at least you could do so in comfort. There wasn't much
legroom in the back, either. Despite these car sizes, the rear seat legroom was, well,
let's just say not great. The car is really more built for looks than anything else,
and here you can see a Tornado XS with the cloth interior. Similar seat pattern design
with that loose cushion look to it, but here you get a nice velour. I would prefer the velour. I
don't know why people tend to prefer leather these days. I actually like cloth a lot better.
It's cool. It's breathable. Leather, you kind of get stuck to unless you have cooled seats,
and then if you have, you need heated seats in the winter to keep warm, because leather's
really either too hot or too cold. Cloth, to me, is where it's at, and take a look at those
rear defroster lines going all the way around that back glass. That had to be expensive,
and perhaps that's part of the reason why Oldsmobile charged an incremental $2,500 per
unit for the XS, as well as the moonroof became standard with all of them.
Now, under hood in your Tornado XS, in either the 1977 or 78 model years,
you were forced to get Oldsmobile's 403 cubic inch V8 that made 185 horsepower and 325 pound
feet of torque. 1976 would be the last year for the big block Oldsmobile engine and the 455. Yes,
Oldsmobile did make a small block and a big block. They were different sizes physically.
The 403 was a small block with Siamese cylinder walls and a very oversquare design. The 403
wasn't a bad engine, but I would say that it's not quite as good as the 455, and they didn't have
as strong of a bottom end as the Oldsmobile big blocks. The 403 had hollow main bearing webs, and
so long as you keep the engine RPM below 4,000, you'll be fine. But if you really hot-rodded
these engines, they would have some bottom end issues. This car also has an air pump. You can see
the air pump hardware that's plugged into the exhaust manifold there. Although, interestingly,
this person is not obeying all the emissions laws because there's no vacuum hose going to the EGR
valve on this particular car. You can see the cruise control box that's mounted to the driver's
side wheelhouse. That appears to be a Dana Perfect Circle setup, which was pretty typical for cruise
control boxes of this time. And you can see the servo that's right behind the distributor. Now,
where did the inspiration for the Tornado XS come from? Well, here's a sketch, I believe,
done by George Camp for the 1971 Oldsmobile 98. And you can see this has that wraparound rear glass
with that hot wire bend. But obviously, this particular design didn't make it through to
production for the 98, although it is extremely handsome. I love the lower molding, the rockers,
the bright rocker molding, and how it transitions just behind the front wheel to be larger and then
back to be smaller. The skirted rear wheel, typical of the Oldsmobile 98s. And that reverse
kind of B pillar that sets up the rear backlight very, very well. Of course, you can also see the
vertical taillights and make out the 98 script there on the rear quarter panel. So, this was
one of the inspirations from a design standpoint for the 77 and 78 Tornado XS. And though it was
not used on the 98, at least this particular backlight theme, it clearly made its way
to the Tornado a few years later. Here's another sketch for the second generation Tornado. This
one done by Bill Mahalik. And you can see, again, you have that B pillar that has the interesting
form. It was at this point where General Motors designers thought that they were going to have
some pretty stringent rollover standards in vehicles. And that's what birthed the Colonnade
cars, as well as these relatively thick B pillars on vehicles at the time. And so,
the design of the vehicles had to change. And you can see here that Bill has, well,
kind of made that B pillar an art form. I would also say a variant of that front end would kind
of make it on to some Oldsmobiles in the 1980s. In particular, you could almost see the Olds
Forenza front end there. I don't mean to insult Bill by saying that, but I think it's a handsome
sketch. And Oldsmobile used some of the elements of the theme a bit later on. And here's a final
sketch showing some inspiration for that Tornado XS. Not sure who this sketch was done by. This
might be a Dick Rosen sketch, but admittedly not sure. In any case, notice that very low belt line
and door glass area that's quite large, that large B pillar. And you have the backlight here
in a more fastback form, kind of 82 Firebird Camaro-y. You also have the twin port theme
up front in the grille, something that would start with Oldsmobiles in the 1968 model year.
I am not sure why Oldsmobile decided that they wanted to go to that twin port theme. It was
already a Pontiac signature, and Oldsmobile kind of appropriated it after that point. But nonetheless,
they decided to do it, and I think it ended up looking relatively handsome. So in closing,
I hope you enjoyed this spotlight on the Tornado XS and its acres of glass. Be sure that if you
buy one of these, you check to ensure that the headliner is in good shape and that there haven't
been leaks from the sunroof. Often the drains would plug, and then you'd have water that kind
of would pool in that sunroof area and create issues. The rear backlight was just fine, but
these did have some rust issues with the padded vinyl top that basically attracted moisture. So
you want to make sure that you get one without rust around the vinyl top padding. And of course,
in the typical areas behind the wheels, and take a look at the frame, etc. But overall,
these are pretty cool vehicles and a neat design, a great way to cap off the second generation
Tornado. Thanks again for watching.
