Why Don’t CNC Machines Run As Fast as Possible?

Neo Structure
3 followers
3 Video Views·Sep 17, 2026
In this Office Hours, Jake breaks down what actually controls how fast you can machine a part. We’ll look at the relationship between RPM, feed rate, and chip load, and how changing one affects the others.
…
Video Summary
AI GeneratedThis office hour session explains why CNC machines aren't always run at maximum speed. The decision depends on the user's goals—balancing machine longevity and consumable costs against production volume—while emphasizing the critical need to maintain the correct chip load through the coordination of RPM and feed rate.
Welcome to semester two.
This is our office hour session
where we're answering questions
and breaking things down in a clear and simple way.
In this one, we're answering the question,
why wouldn't you just run the machine as fast as possible?
So let's get into it.
Why wouldn't you just run the machine as fast as possible?
This is a great question
and there's a couple different answers to it.
Now, it depends on who's running the machine
and whose machine it actually is.
If it's my machine in my garage
and I'm working on parts for, say,
the race car that I'm building,
I might not be pushing that machine
to 100% of its capacity
because I want the machine to last a little bit longer,
a little bit less stress on it.
Now, for machines like Senka Sen,
where they're pumping out thousands of parts
every single day
and they're trying to keep the prices as low as possible,
they are definitely gonna be running that machine
as fast as possible.
So really, that answer is who's using it.
But let's go to the board here
and talk about why we can change the speed of the machine
and how it affects it overall.
Now, we talked about it during the semester is chip load.
And chip load is really all that we care about maintaining.
If we have our part,
and we're gonna draw it in like this,
and we have our end mill coming in and making that cut,
right, we have this chip load here
is what we wanna maintain.
This is how much stress that we're putting on the end mill.
This is realistically how much stress
that we're putting on the machine as well.
If we wanna run as fast as possible,
we can do two things, right?
We can either change the feed rate,
how fast we're going into the material,
or we can also change the RPMs.
So if we change those RPMs and we're spinning faster,
then we're gonna start taking a smaller and smaller chunk
of material out if we're maintaining the same feed rate,
I'll call this F.
When you go back into the semester,
we talked about how the equations are
that we can change that overall.
If we wanna maintain, say, a 2,000 chip load,
which is pretty casual, not a lot.
If we increase RPMs, we need to go faster in the material.
There's two different things that are happening here.
You go too small,
then we can get really, really small cuts.
We burn up that end mill prematurely,
and we're gonna go through a lot of end mills.
We're not necessarily putting a lot of load on things.
We're just going through a lot of consumables.
If we take too much of a cut,
we go too fast in the material, slow down our RPMs,
we can end up causing too much stress on that end mill
and breaking it prematurely, right?
We're just taking too much of a bite
or a scoop of ice cream there.
Now, realistically, what we're trying to go for here
is what are the RPM capabilities of the machine
and how hard do we wanna push the machine?
If the RPM capabilities of the machine are 10,000 RPMs
and we wanna get parts out of it as fast as possible,
then we are gonna set the RPMs to 10,000 RPMs,
and then we are gonna match the feed rate
to get us the desired chip load.
So realistically, I guess to fully kind of come back
to the original question,
we're going to run that machine as fast as possible
to the situation that we're looking to do.
Now, hopefully that answers your question
in comparison with the actual lesson
that we talked about during semester two.
To get your questions answered,
drop a comment in the videos below,
and we'll see you on the next one.
