Discover how high-voltage underground cables are manufactured to safely carry hundreds of thousands of volts. From conductor stranding and XLPE triple extrusion to shielding, water protection, and the outer sheath, this video explores the complete manufacturing process and the engineering behind each layer.
in this video: 00:00 High-Voltage Electrical Discharge 00:40 Inside a High-Voltage Cable 01:09 Conductor Manufacturing 02:19 Triple Extrusion Process 04:47 XLPE Insulation & Semiconductive Screens 05:07 Controlling the Electric Field 06:10 Metallic Screen 07:14 Water Protection & Outer Sheath 08:09 Steel Wire Armor 08:43 Outer Sheath & Final Cable Manufacturing 09:40 525 kV HVDC Cable Project 10:58 Trenching & Cable Laying 13:19 Horizontal Directional Drilling 15:16 Final Installation
AI Generated·May contain errors
Video Summary
AI Generated
This video explains the engineering and installation of high-voltage underground cables. It details how specialized insulation, semiconductive screens, and metallic shielding contain immense electric fields, the precision extrusion process used in manufacturing, and the logistical challenges of transporting and installing these cables using trenches and horizontal directional drilling.
High voltage electricity can arc through the air when the electric field becomes strong enough.
Yet beneath our streets, underground cables carrying hundreds of thousands of volts
can run only a few meters below our feet. So how can such enormous voltage be contained safely
inside a cable without electrical discharge breaking through the insulation? The key is
not just the insulation itself. Around the XLPE insulation are conductive shielding layers that
control the electric field, keeping it confined and evenly distributed within the cable. To achieve
this safely at hundreds of kilovolts, every layer has to be manufactured with extreme precision.
The process begins with the conductor at the center of the cable. Instead of using one massive
copper rod, hundreds of smaller copper wires are twisted together to form a single conductor.
This stranded structure provides the large cross-sectional area needed to carry very high
currents while keeping the conductor flexible enough to be manufactured, wound onto large drums,
transported, and bent during installation. For very large AC cables, the conductor can also
be divided into specially arranged segments. This helps reduce skin and proximity effects,
which would otherwise concentrate the alternating current unevenly within the conductor and increase
electrical losses. The individual wires are precisely stranded and compacted together,
forming a dense, nearly circular conductor ready for the next stage of production.
With the conductor now complete, it moves to the extrusion line.
Here, specialized machines continuously form new layers around the moving conductor.
How does this process actually work? An extruder works by continuously feeding polymer pellets into
a heated barrel. Inside, a rotating screw carries the material forward while gradually compressing
it. Heat from the barrel, combined with friction and shear generated by the screw, melts the
polymer into a uniform, viscous material. As it moves forward, the molten polymer is mixed and
homogenized, while trapped gases and moisture can be removed through a venting section. Near the end
of the barrel, the screw builds up pressure, forcing the molten polymer continuously toward
the extrusion head, where it can be formed into the required shape. For high-voltage cables,
three extruders operate simultaneously, each supplying a different material into a single
extrusion head. As the copper conductor passes through the center, the three materials are
applied together, forming the conductor screen, the thick XLPE insulation, and the outer insulation
screen. This single continuous process creates the first three layers surrounding the conductor.
Immediately after extrusion, the newly coated cable enters a long, pressurized tube. Here,
controlled heat triggers the cross-linking process, transforming the polyethylene into XLPE
and giving the insulation its thermal and mechanical stability. The cable is then gradually
cooled before leaving the line. Like low-voltage cables, high-voltage cables need more than just
a layer of insulation. Between the conductor and the XLPE insulation is an inner semiconductive
screen, while another semiconductive screen surrounds the outside of the XLPE. The reason
is the electric field. The higher the voltage, the stronger the electric field around the conductor.
And unlike electric current, an electric field does not need a conductive path.
It can exist even inside insulating materials, such as XLPE. The problem is that electric
fields tend to become concentrated around sharp edges and irregular surfaces. Since the conductor
is made from many individual strands, its surface is not perfectly smooth. The inner
semiconductive screen fills these irregularities and creates a smooth surface around the conductor,
allowing the electric field to spread evenly into the XLPE insulation. The outer
semiconductive screen creates another smooth and controlled boundary around the outside of
the insulation. Together, these layers keep the electric field evenly distributed within
the insulation, preventing dangerous concentrations that could eventually damage it.
But controlling the distribution of the electric field is still not enough. A metallic screen,
usually made of copper wires or copper tape, is added around the insulation screen and connected
to ground. This grounded layer provides a controlled boundary for the electric field,
keeping it confined within the cable's insulation system instead of extending into the surrounding
environment. It also provides a low resistance path for leakage and fault currents to flow
safely to ground. Together, the insulation, semiconductive screens, and grounded metallic
screen allow hundreds of thousands of volts to be safely contained inside the cable. Next comes the
water blocking system, designed to limit the spread of water if moisture ever gets inside the cable.
If the outer layers are damaged and water enters, the water blocking tape absorbs the
moisture and rapidly swells. This expansion fills the empty spaces inside, forming a barrier that
prevents water from traveling farther along the length of the cable. From here, the construction
can vary depending on how and where the cable will be installed. Where additional mechanical
protection is required, the cable may receive a layer of metallic armor to withstand the stresses
of installation and the surrounding environment. Other cables are installed inside dedicated
protective ducts, where much of that mechanical protection is provided by the installation system
itself. Finally, a tough polymer outer sheath protects the finished cable against abrasion,
chemicals, moisture, and environmental exposure. Once manufacturing is complete,
the next challenge is getting the cable into the ground and beneath the sea. This project
carries electricity generated by offshore wind farms back to the power grid on land.
Because the power must travel over long distances, it is transmitted at 525 kilovolts
using high voltage direct current, or HVDC, an efficient solution for carrying large amounts
of electricity through long submarine and underground cables. After coming ashore,
the cables continue for another 54 kilometers underground before reaching the converter station,
where the electricity is converted back to AC and fed into the power grid. The entire link can
transmit up to 1,400 megawatts of power into the onshore grid. The underground section begins by
excavating a continuous trench along the cable route. Here the trench reaches about 1.6 to 1.8
meters deep. While the upper section is several meters wide to provide safe working space,
it narrows to about 70 centimeters at the bottom, where the cables will eventually be installed.
With the trench prepared, the cable can now be transported to the installation site,
but moving a high voltage cable of this size is a major operation in itself. A single reel
can carry up to 1,200 meters of cable with a total weight of around 130 tons. Specialized
heavy transport vehicles are required to move these enormous reels. The journey is often made
at night when traffic is lighter, with the route carefully planned to accommodate the size and
weight of the load. But an underground cable route cannot always continue through an open
trench. Rivers, canals, roads, and other obstacles may have to be crossed without
disturbing the surface above. This is where horizontal directional drilling, or HDD, is used.
Instead of excavating across the obstacle, a drilling machine creates an underground path
beneath it. The process is carried out in two main stages. First, a guided bore is drilled
from one side to the other. Then, the bore is enlarged and a protective duct is pulled back
through it. With the protective duct now in place, the cable can finally cross the obstacle.
A pulling head is attached securely to the end of the cable and connected to a pulling line
running through the duct. The cable is then carefully pulled through the underground passage
until it emerges on the other side, allowing the cable route to continue beyond the river.
Once the cables are in place, the trench is carefully backfilled.
Protective cover plates are laid above the cable route, providing an additional barrier against
future excavation. Higher up, warning tape marks the presence of high voltage cables below,
giving workers an early warning long before they can reach the cables themselves.
And once the ground is restored, the cable disappears from view. But the protection
remains. Its insulation and shielding system keeps the powerful electric field safely contained
inside, while the surrounding protective layers and underground installation protect the cable
from the environment outside. Together, they allow hundreds of thousands of volts to travel
safely beneath our feet, every day.