In a world where everything is new and interesting, surprises make your life awesome. It is a perfect way to add a spark to a dull week and make it fun. One way to give a smile on someone's face is by giving them a small gift. There is nothing like a gift that can bring a smile on someone's face and your own. Electronics and love, are like the north-pole and the north-pole, the only correlation between them is that they always repel each other. BUT, STEMpedia has given a new definition to love by combining love with electronics. By using this EVIVE STARTER KIT I am going to give a small surprise to my partner on her birthday. ------------------------ Learn the basics of new-age tech, build countless projects, program robots, and become the innovator you’re destined to be!
In a world where everything is new and interesting, surprises makes your life awesome.
It is the perfect way to add a spark to a dull week and make it fun.
One way to give a smile to someone's face is by giving them a small gift.
There is nothing like a gift that can bring a smile on someone's face and your own.
Electronics and love are like North Pole and North Pole.
The only correlation between them is that they always repel each other.
But Stempedia has given a new definition to love by combining love with electronics.
By using this Evive Starter Kit,
I'm going to give a small surprise to my partner on her birthday.
The plan is to shower love upon my partner with rose petals
as soon as she walks out of the bedroom.
For this project, we need an ultrasonic sensor,
a servo motor, 80 mega 2560 powered Evive Starter Kit.
The good thing is, all these components are part of the Evive Starter Kit.
Start by connecting the trig pin and the echo pin of the ultrasonic sensor
to the pin number 12 and 11 of the Arduino.
Then connect the PWM pin of the servo motor to pin number 9 of the Arduino.
After that, we are going to connect all the positive and negative terminals of the sensors
to the positive and negative pins of the Arduino.
That's it. It's just simple as that.
Using a 3D model, I'm going to show you guys the design and working of the flower dispenser.
Alright, so this is the whole setup.
The back bit sticks to the wall and using these two holders,
it holds a lightweight stick which in turn holds the front bit or the dispenser.
I'm going to put all the rose petals in here.
When the ultrasonic sensor detects an object in its way,
it will send a signal to the Arduino,
which will then rotate the servo causing the dispenser flap to open.
When the flap opens, all the rose petals will fall on my partner.
The whole setup is made using a cardboard box making it lightweight and easy to stick to the wall.
So, this is how it looks like.
Once we power the Evive Starter Kit, the ultrasonic sensor starts waiting for a moving object.
As soon as an object is detected, the flap opens up to dispense the flowers.
The code has two parts.
In the first part, we are detecting the motion using an ultrasonic sensor.
And in the second part, we are rotating the motor to open the flap whenever a motion is detected.
Start by including the servo dot h library in the program.
Then define the constant and the global variables that will be used throughout the code.
To use the servo, we are creating an object of the servo class.
Then in the setup section, we are initializing the servo by using the
Finally, in the loop section, after initializing the ultrasonic sensor,
we are checking if the distance of the moving object is less than 100 cm.
If the distance is less than 100 cm,
we are going to open the flap by rotating the servo 90 degrees.
Alright, now the interesting bit.
So, let's go ahead and set everything up.
The pedals dispenser stays on the top of the door and the ultrasonic sensor at her waist level.
Finally, I just need to connect all the sensors to the evive box.
After that, it's just a matter of waiting for her to come out and activate the sensor.
If everything goes as per plan, I would be able to give her a nice surprise.
Boo!
Yeah!
The evive starter kit contains
The main brain brake which is an Arduino Mega powered evive
Two tyre and wheels
Two drive gear motors
Some cable ties
Jumper cables
One USB cable
One screwdriver
One 18650 battery
One joystick
Few LDRs
Mechanical parts for the evive rover
Young maker's guide
Two servo motors
One ultrasonic sensor
Two IR sensors
One Bluetooth module
LEDs
Push button switches
Crocodile clips
Resistance
Screws
Sensing cable
And capacitors
My curiosity took me to STEMpedia's website.
I was surprised to see the rich source of online information and educational material
they have on their website.
The website has all that your young one need to become an electronic hobbyist and a genius.
You can start learning as a student, hobbyist or an educator.
The learning center consists of self-explanatory tutorials,
books, projects and other resources for all level of learners.
All these are backed up by 24x7 blog and a vast repository of projects.
Isn't that amazing?
Let's check out what these courses are all about.
Wow, look at that.
They have courses on Electronics, Programming and Robotics.
Each course costs only $19.99 or if you take the whole lot, you only have to pay $39.99.
Isn't that cool?
I'm more interested in Electronics and Robotics,
so I'm only going to check out those two sections and leave the rest for you guys to explore.
The Electronics course is a beginner's level course that teaches the basics of
electronics with a learning by doing approach for anyone above the age of 8.
This is a 30-hour course which contains text, video, quizzes and assignments.
With the evive starter kit, you can start learning anytime without any prior knowledge
of electronics.
They even give you a certificate of achievement upon successful completion of the course.
Alright, now let's check out the Robotics section.
This is also a beginner's level course on robotics with a learning by doing approach
that covers the basics of robotics and teaches you how to make your own simple DIY robots
using the evive kit.
This is also a 30-hour course which has 5 lessons, 6 quizzes and 4 assignments for
anyone above the age of 10.
And same as the other two courses, you get a certificate of achievement upon completion
of the course.
Now let's quickly check out the products showcase.
The showcase is full of cool DIY kits.
The first one is the evive starter pack which is currently on discount and you can get the
whole kit for 179 bucks.
This kit is just a one-stop shop for your kid to learn the basics of electronics without
making their hands dirty doing soldering.
This kit is completely plug and play, easy to program and can be controlled using the
mobile phone.
Your kid can do programming just by dragging and dropping logics with the PictoBox.
The project sub is full of endless list of projects which will help your young one's
dream and imagination become a reality.
So what are you waiting for?
Get the evive starter kit now to kickstart your kid's DIYing journey into the dreamlands
of electronics.
Thanks again for watching this video.
I hope it helps you.
If you want to support me, you can subscribe to my channel and watch my other videos.
Thanks.
See you again in my next video.
Bye now.