Trying to explain dialup to a pre-teen will evoke the same wild-eyed bewilderment as “a dinosaur was as-big-as this house”. We can’t go off what our parents did because two tin cans connected by a string isn’t really the same these days and probably it would look like a piece of junk for the new and upcoming generations. However, the truth is "life is busy" and hence we don’t spend enough time with our children. Children need high-quality time with parents and caregivers - the QUALITY of time spent with them is much more important than the QUANTITY of time. Christmas was the perfect time to explore and setup this bonding. With a bit of help from my little monster and by using The Most Complete Starter Kit from ELEGOO I created this small Christmas Village for my little monster.
Trying to explain dial-up to a preteen will evoke the same wild dialed bewilderment as a dinosaur
was as big as this house. We cannot go off what our parents did because two tin cans connected
by a string isn't really same these days and probably it would look like a piece of junk
for the new and upcoming generations. However the truth is life is busy and hence we don't
spend enough time with our children. Children need high quality time with their parents and
caregivers. The quality of time spent with them is much more important than the quantity of time.
Christmas was a perfect time to explore and set up this bonding with a bit of help from my little
monster and by using the most complete starter kit from Elegoo I created this small Christmas
village for my little monster. This tutorial is sponsored by Elegoo incorporation. Established
in March 2015 Elegoo is a thriving technology company dedicated to open source hardware
research and development, production and marketing. You can buy the product from Amazon
all over the world. Using the most complete starter kit you can turn your young ones into
electronic gurus. To create the cardboard village we need cardboard sheets, A4 paper, permanent
marker or pen, scissor and a knife, hot glue gun or wood glue. Adding a bit of color would have
made my project even more attractive. However I just left it all in white. I created two PDF files
with all the measurements in it. The link to the PDF files is in the description below. After printing
the PDFs on A4 sheet I extracted the shapes from it using a paper cutting scissor. Then I traced
the paper cutouts on pieces of cardboard and using both scissor and knife I extracted all the pieces
of cardboard that I need for this project. Using a hot glue gun I joined all the cardboard cutouts.
Be careful while using hot glue gun. Use gloves as much as possible to avoid hot glue from burning
your hand and fingers. Hot glue can also be more forgiving as you can re-heat and re-glue if you
are unsatisfied with your seam. Try applying the glue from the inner side as much as possible to
leave the outer side neat and clean. Meaningful connections are all about quality of time and not
about quantity of time. Keep it simple and connect with your child in a way that makes sense of your
lifestyle and relationship. Each connection has a lasting impact and provides support and reassurance
that your child needs. Although the days with little kids seem long however the years fly by.
Use this practical and purposeful blueprint to enjoy the moments you have together. So this is
how it looks like. As advised earlier adding a bit of color would have made my project even more
attractive however I just left it all in white. I created this wooden frame on which the village
will sit. The frame will also house the electronic components in it. Now for the electronics bit we
need the most complete starter kit from Elegoo. This kit has all the components that are required
for this project. Using the soldering iron I made few holes around the pathway. These holes are for
the blue and white LEDs which will blink alternately. Adding RGB LEDs would have definitely given this
a better look and feel. Next I added a RGB LED to the water feature. So this is how the final setup
looks like. I added some hills at the back for the rising and setting of the sun and the moon.
The logic is very simple. The DC motor or the stepper motor rotates the half sun and half moon.
A LDR is placed in a way that the sun rays can cover it up. When the moon side is up the sun rays
cover the LDR and vice versa. The LDR acts as a switch and turns on and off the blue and white
flashing LEDs. With the same logic you can go even more creative than what I did. The DC motor
runs off the 5 volt pin of the Arduino so we don't need to code anything for that. For the rest of the
code I'm looping through and flashing the RGB LED followed by checking if the LDR has detected any
light and then waiting for 200 milliseconds before repeating the process again. Thanks again for
watching this video. I hope it helps you. If you want to support me you can subscribe to my channel
and watch my other videos. Thanks. See you again in my next video. Bye now.