Christmas is just around the corner and I wanted to create some of my own Christmas Decorations. Well naturally, I am not going to spend on something that I can make myself with things from my scrap wood bin. So, before crack opening a cold one with the boys, I planned to create some pallet stars, pallet houses and a pallet Christmas Tree.
Christmas is just around the corner and I wanted to create some of my own Christmas decorations.
Well, naturally I'm not going to spend on something that I can make myself
with things from my scrap wood bin. So, before crack opening a cold one with the boys,
I plan to create some pallet stars, pallet houses and a pallet Christmas tree.
For this project we need pallet wood, protective equipment like face mask, glasses, gloves,
sanding tool, hammer, measuring tape, nails, handsaw or chop saw, knife, pliers,
pencil and paint of your choice. Using two hammers I'm dismantling the pallet. My aim is to reuse
all the nails used in building this pallet so that I can use them in building my own project.
Let's start the project by sanding the pallet planks to give them a nice and smooth texture.
Since I'm using an electric saw and will be placing my hand and finger close to the blade,
I have to pay extra attention and practice safety as much as possible. To create the pallet houses,
I'm using the thick pallet wood that is generally used to separate the bottom and top section of
the pallet. To create the roof, I'm cutting 45 degree angle from each side of the pallet.
To get that 45 degree angle, I have to draw a square and then cut along the diagonals of the
square. Since the width of my pallet is 8 centimeter, I am creating a square of 8 centimeter
side each and then joining the diagonals. Next, by cutting the diagonals of the square, I'm able
to extract two houses and two triangles of 45 degree angle each. As I don't like wasting any
wood, so I went ahead and cut two blocks of pallet and glued the leftover triangle on top of them.
Once the setup dries up, I will sand the edges and will make it look like a single piece of wood.
To build the star, I'm using pallet wood. However, you can use any wood of your choice.
Each star has five long sides, 7.1 inches long and five short sides which are 6 inches long.
Each of these 10 pieces will have one side cut to 36 degree angle and the other side cut to
54 degree angle. Cutting a 36 degree angle is easy. Turn the saw's blade to 36 degree and then
place the piece of plank standing straight and then just lower the saw. That's it. Easy as.
However, since miter saw only goes up to 45 degree, cutting a 54 degree angle is not that easy.
I had to create a jig of 30 degree one side and 45 degree other side. Now, let's do the math. 45
plus 9 is equal to 54. So, to cut the 54 degree angle, I need to set my miter saw to 9 degree
angle and then place the pallet plank next to the 45 degree side of the jig and then drop the saw.
Boom! Nailed it. Now, to create the star, we need to glue the 36 degree angle of the long side
to the 36 degree angle of the short side as shown in the video. Once the sides dry up,
join the 54 degree angles exactly the way I have shown in the video.
Alright, now let's create the Christmas tree. I could have done three separate videos but
anyways, cool. So, let's get the top section sorted first. Cut a 5.5 and a 6.5 inches pallet
plank with one side cut to 30 degree angle on each of the planks. Then, let's cut four 7 inches
plank for the sides. The bottom ones will also need to be cut at 30 degree angle each. The base
is 14.5 inches long. For this setup, I have cut two 4 inches plank for the trunk and one 5.5
inches plank for the base of the trunk. That's it. Now, it's just a matter of gluing all the
planks together. Stay blessed and have a Merry Christmas and a very Happy New Year.