Is your ESP32 C3 Super Mini randomly dropping off WiFi or losing Bluetooth? You're not alone — and here are 3 methods that actually work.
The ESP32 C3 Super Mini is an incredible thumb-sized microcontroller with built-in WiFi and Bluetooth, perfect for makers and developers. But many users (myself included) experience loose connectivity caused by a mix of hardware design quirks and software settings. In this video, I walk through the 3 most effective fixes I've tested personally. #ESP32#ESP32C3#WiFiFix#Arduino#Microcontroller#MakerProjects#diy ----------------------------------------------------------------------------- Code: ///// Arduino ///// ----------------------------------------------------------------------------- ///// To Set The Max TYX Speed ///// #include "esp_wifi.h"
void setup() { // Set max TX power to 8.5 dBm (the most stable value reported by users) esp_wifi_set_max_tx_power(WIFI_POWER_8_5dBm); // Your normal Wi-Fi initialization here WiFi.begin(ssid, password); }
///// To Disable Bluetooth Controller ///// ----------------------------------------------------------------------------- #include "esp_bt.h"
void setup() { // Disable Bluetooth controller esp_bt_controller_disable(); } ----------------------------------------------------------------------------- If this helped, drop a comment and subscribe for more DIY electronics projects, 3D printing, and maker tutorials! 🙌
Support My Work --------------- BTC: 1Hrr83W2zu2hmDcmYqZMhgPQ71oLj5b7v5 LTC: LPh69qxUqaHKYuFPJVJsNQjpBHWK7hZ9TZ DOGE: DEU2Wz3TK95119HMNZv2kpU7PkWbGNs9K3 ETH: 0xD64fb51C74E0206cB6702aB922C765c68B97dCD4 BAT: 0x9D9E77cA360b53cD89cc01dC37A5314C0113FFc3 LBC: bZ8ANEJFsd2MNFfpoxBhtFNPboh7PmD7M2 COS: bnb136ns6lfw4zs5hg4n85vdthaad7hq5m4gtkgf23 Memo: 572187879 BNB: 0xD64fb51C74E0206cB6702aB922C765c68B97dCD4 MATIC: 0xD64fb51C74E0206cB6702aB922C765c68B97dCD4
Thanks, ca again in my next tutorial.
AI Generated·May contain errors
Video Summary
AI Generated
This video provides a comprehensive guide on troubleshooting network disconnection issues with the ESP32-C3 Super Mini microcontroller. The author explores the causes of these instabilities—ranging from hardware design flaws to power supply issues—and offers several practical software and hardware workarounds to ensure a stable Wi-Fi and Bluetooth connection.
Hi everyone, I have recently started working with a tiny, super affordable microcontroller board
called the ESP32-C3 Super Mini which comes with both Wi-Fi and Bluetooth. Part of the ESP32 Super
Mini series, this little board has quickly become a go-to for makers and developers since it
squeezes the full power of ESP32 into a thumb-sized package. If you are subscribed to my channel,
you would have probably seen me using it in my last three projects. It is single core,
compact, lightweight, and can be programmed using Arduino IDE. While these boards are great,
I noticed they occasionally drop off the network. When that happens,
the only fix is to physically go and reboot them to bring them back online.
After getting frustrated with this, I started looking into ways to solve this problem. In this
video, I will go over three methods that has actually worked for me to fix this problem.
Apparently, the ESP32 Super Mini disconnecting from the network is a known issue,
usually caused by a combination of hardware design flaw and software settings. While a
permanent fix can be tricky to find, there are several effective workarounds you can try.
Reducing the radio power is the number one most recommended fix. The voltage regulator
often cannot handle the default 19.5 dBm peak power, causing disconnection. Running Bluetooth
and Wi-Fi simultaneously can also overload the single-core chip. Manually set the TX power to
8.5 dBm or 10 dBm in your code. Try older or different firmware build or disable Bluetooth
if you are not using it. When the device connects to the network but disconnects under load when
sending data, the TX power fix is highly likely to solve your problem. The PCB antenna is sensitive.
Plugging a pin header into GPIO20 or GPIO21 or having stray wires near the antenna can detune it,
killing the Wi-Fi connectivity. It can also be due to poor quality control during production,
leading to outright faulty modules. Keep all wires and metal objects away from the antenna.
If possible, inspect the antenna solder joint for a poor connection.
The ceramic antenna sits very close to the crystal. Its feed pad is on the left,
while the opposite end is left unconnected. Many hobbyists simply scrap off the ceramic component
and solder a 31mm looped copper wire directly to the pad, creating a standard,
quarter-wave whip antenna that immediately resolves the range issue.
The ESP32-C3 draws high current peaks up to 500mA when transmitting over Wi-Fi. A weak USB cable,
a poor quality regulator on the board, or an unstable power source can't keep up, causing
I recommend using a high-quality USB cable and a powered USB hub. Adding a 10μF to 100μF low ESR
capacitor between the 5V and ground pins near the board can stabilize the power. If none of
these steps work, you may have a faulty board. Unfortunately, quality control on these very
cheap modules is inconsistent, and sometimes the only reliable solution is to purchase a
different vendor. The USB and boot modes can sometimes be a bit finicky. A common trick is
to remove the board from a breadboard while flashing it, as the metal contact on the
breadboard can interfere with the signal. Metal objects, hands, or metal enclosure
directly over the antenna kills the range and stability. Also, please make sure that the Wi-Fi
channel you are using is not too much congested. Drop a comment and subscribe for more DIY tech
and projects like this.