Blender 2.8 and fusion 360 are both great tools, and blender is my goto for sculpting, but there are still several reasons i prefer fusion 360 for my more technical designs, from the simple sketch system, to the way you can make simple adjustments to dimensions on the fly, see why i prefer fusion 360 for these cases!
Technivorous is about all things tech. It's for geeks who love to code, And for makers who love to build. It's for people who are curious about Raspberry Pi's. And 3D printers. And game making. Pretty much anything Tech!
If you cant afford a donation, thats ok. leave a couple likes. and dont forget to subscribe. sharing and liking our videos is one of the best ways to help support the channel. other ways to contribute: if you shop on amazon, bookmark this link and use it, it costs you nothing, and helps me out a ton! https://www.amazon.com/?rw_useCurrentProtocol=1&tag=technivoro00-20
if you can afford a donation, please contribute! a little goes a long way! thanks again for all the support people! I couldnt do it without you!
Disclaimer: ANY AND ALL reviews are my own, honest opinion, and I do not accept payment in exchange for a favorable review. for more information on where to send your tech to be reviewed, e-mail me at [email protected] Subject:TECH
Current Channel Goal: 1000 Subs!
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
now accepting reviews! sorry we DO NOT take payment for better reviews.
AI Generated·May contain errors
Video Summary
AI Generated
The speaker explains why Fusion 360 is superior to Blender for technical and mechanical modeling. While Blender is preferred for sculpting, Fusion 360 provides the millimeter precision, hardware catalogs, and parametric editing capabilities necessary for creating functional 3D-printed parts that fit together perfectly.
All right, Technivorous here. So real quick, I wanted to discuss with you guys why
exactly it is I prefer Fusion 360 for doing technical models or mechanical parts
to Blender, which I use more for sculpting. If I want millimeter perfection in something,
this is generally where I'm going to go. And there's a couple of reasons for that. Now, this
is a shower head that I, well, it's a mount for a shower head that I'm designing. It's basically
the shower head will slip in here. This arm will attach here. And then there's a peg and rod that,
or a rod and a nut and a bolt that go through there. One of the reasons I prefer to use this
for things like this is because it has these patterns here for inset screws. And there are,
in fact, a bunch of different hardware components we'll get into later when we're doing the tutorials.
But you can make holes specifically set for certain kinds and sizes of screws. And there's
a whole catalog of those screws. And not only that, but you can, as evidenced by the part I
will show you that I printed for this, make your objects to the exact size and threading of those
screws if you're making holes for screws or if you're making the actual bolt itself. So I'll
show you a piece that I printed. It's basically going to go through here and mount the arm.
And we'll get to that in a few minutes. But for now, we're going to look at a couple more things
and I'll show you how easy it is to get going in Fusion 360. So right now I have my origin turned
on and I'm basically just going to click on the floor plane, the bottom plane there. And I want
to hit create sketch. It'll go into a orthographic view and take you out of perspective. So now I'm
looking at basically the top down and I have, I can search for tools by hitting the S button
and it'll bring up some shortcuts that I have here and some other tools here. Basically,
this is what I use the most and that's why they're here. So we'll start with that. Say I know the
dimensions of something I'm making, I'm going to create a box and it is going to be, let's see,
50 millimeters by 28 millimeters. That sounds good to me. So since I'm using this center point
rectangle, I can go ahead and just do it again. And say I know my outer dimensions are larger
than my inner dimensions, I can either punch them in here. I can just click it and then it'll
leave the square blue. And I actually can act on this, but there's another way that you can
go in here and hit D and select two edges and then drag it out and it'll give you the
distance between them. And using that, you can generally do quite a bit of size changes.
So the next one that I want to do is this constraint right here.
And we're going to change that to 52. And as you can see, I have a fairly decent outline of a box here.
Don't necessarily want to make a box. I can do a circle and then using the dimension
button, you can measure the radius of that circle. We're going to have ours be exactly 50.
Now this is all in millimeters, so it does come out precise, which is perfect for technical
modeling. Like if I'm making a miniature robot and I need to put a raspberry pi in there, I'm
going to use this to mock up the pi and then use a boolean subtraction method to take that away from
whatever model so it fits in there pretty perfectly. Just a quick look at some of the
cool stuff that you can do. Now I've made this pattern obviously a ton of times in Blender as
well. It's fairly easy, but I like the way that you can see my sketches here and see what's going
on. Basically, you're looking at all circles. There's one major circle, two inner circles,
and that creates this nice sinewy line here. And basically, if I want to act on any of the planes
in my sketch, I'm going to select it and I'm going to, using whatever tool I want, this time
I'm going to use the pull tool. Reselect the faces and then I can just lift it up. As you can see
here, it is cutting it and that's why it's invisible. I don't want to do that. I want to join
and I'm overlapping. We'll do it about like there so you can still see the other dot. Now this guy
here is off-centered, but this is just an example. This you can actually print just the one half and
the dot in different colors and they fit together and make the whole thing. You can also do
new body, which we'll try that, that way I can move the dot, and then just hit okay.
And that very easily makes, you can select which piece you want.
Line that back up there, that's better. So this is really, and it tells you the distance between
things. You can, it's, you can get really technical and exact. So it's great for modeling precise
things. Like I said, we're going to be using it to model some more objects. Real quick, let me show
you a couple of things that I have printed on here. I talked about the raspberry pi and the
shower head that I'm making. So I'll show those to you and you can get a good idea of the exact
nature of the precision we're talking about with Fusion 360. All right, here you can see my two
prints I just finished up. They could use a little polishing, but as always, I tend to be
excited to get things off the printer and show them to you. So I haven't quite finished this up
yet. This is the shower head. I will show you how well the shower head actually fits in it,
because that's really great as well. But you can see my nice chamfer on the, on the screw holes
here. So when I screw it in, it will be flush. And you can see, look how, look how well that
threading on that turned out from using their screw settings. And I'm going to see if I can
unscrew it here. It does unscrew pretty easily until it gets to the end there. The bolt comes
out and you can see that's pretty darn accurate. So it works really well. Actually a pretty good
solution for the hinge so I can rotate it and place it. The other mechanical part,
or technical model I should say, is this guy here. This is the Raspberry Pi Zero W.
I use this to run Octoprint once in a while, but as you can see, it's got the four pegs to sit on
and the cutout slot for the GPIO pins in the back. So that fits pretty well.
I am going to go back and make my pegs a little longer and print another one.
But the nice thing about Fusion 360 is to do that, all I'll have to do is grab the four faces
on the circles and extrude them a little bit. And that will help secure it in there a little
bit better. It is pretty snug. I mean, it does fall out if you turn it upside down,
but other than that it's fitting very well. You can also see that I can also lower my back face
down a little bit. There is a little bit of a gap here. But yeah, I'm happy with this.
This in Blender would have taken me a lot longer to make simply because I did go through
two other iterations that, even though I measured it, were slightly off. And you can see
that it's pretty close, but just wouldn't go in. And I'm going to show you right now why
Fusion 360 is so awesome for prototyping and making a minor adjustment like this without
having to rebuild the whole model from scratch. And real quickly, I just wanted to show you how
well it fits into the mount there, the shower head. You do have to slide it up and pull it
out because the cord is thin enough to go through the passage there, but the head is not. So
it's going to be mounted up here, so it's raised from the opposite direction of the other head.
So that should be interesting. All right. So one of the reasons this program is so awesome
is because... Here, I'm going to fix this real quick. Shift. I'm selecting faces right now
of these pegs. Come on. And hit extrude. Make them quite a bit longer. Operation is join.
Okay. Now, real quick, I have the sketches turned on. We're going to go in here,
and we're going to look at one of them. And as you can see, it has all my dimensions and
my constraints. Now, this is a little bit sloppy. It can look a lot cleaner than this.
This was a mock-up I did real quick to test part fitting. So the nice thing is, if I decide that
my pegs need to be a little bit larger, I come back. All I have to do is click on the sketch,
the dimension. If I can get in close enough to just grab the dimension. Okay. And then say I
want it to be 1.5. It keeps it in the same position, reduces the size. And then from there,
if I hit finish sketch, it will carry through the process of everything else it did after I
made the sketch. So it'll have that effect on our part, and we don't have to actually go through
the editing process and physically change its size. So let's see here. I'll hit finish sketch
just to show you. And as you can see, the circle that I worked on just now is smaller than it used
to be. And that is in the model. That is the size of the peg. So I'm actually going to go and change
that back now because I do want it to be two millimeters. That was working pretty well for me.
And just hit two and enter and finish sketch. And as you can see, it is back to the size it
was before. So when prototyping and adjusting to get this to fit, what I did basically,
when it was just a little bit too snug, what I normally would do in that situation
is turn on my horizontal expansion in Cura to a negative value, which would increase the size of
hole, and then I wouldn't have to come back and remodel. But the newest Cura, 4.2.1, doesn't let
you put negative values into horizontal expansion. So I had to come back and remodel it for this to
be slightly larger to increase the size of the gap that it made. So like I said, it's as simple
as I just grabbed this here, and I changed it from 30 to 31. And then I grabbed this one and
changed it from 65.2 to 66.2. So that and then hitting finish sketch finishes my whole model
from the ground up. Because as you can see down here, there is this handy window of steps that
have taken place right here. Actually, I lost it for a second. So it tells you what you did in what
order. So this is an extrude, combine, extrude, all these different things that we did to get
this shape that we have. Now the base shape of this, I will go back to and it is just that
0w card. I also think that before I finish this, to give you another good example
of what is what here, this dimension here, 4.40. We're going to make that
4.6. Because I believe, yep, there is another one. And we're gonna make this
1.6. No, we're gonna make this 1.2, excuse me. Because that's the hole that the GPIO pins go
into. And I think it could be a little bit wider without having any problems. So I hit finish
sketch. And like I said, it automatically makes that hole wider. So it is amazing for
adjusting a model a little bit and not having to worry about the other parts coming out correctly,
or messing them up somehow. And you can even go in here and select, okay, this extrusion,
I want to change this by one millimeter. And you can go in and you can change it and hit okay.
So being able to edit something you've already done is like an undo button on steroids, okay.
So that makes this very, very handy for doing technical models and prototyping, finding
the exact measurements you need. Sometimes it'll take a couple test prints to get it precise.
But with larger things, it is super simple to make a good run the first time.
And as always, guys, I am Technivorous. Thanks for watching this video.
Don't forget to hit the like button. You can subscribe right here by clicking on the icon.
And I put a couple videos up in the corner. One of them is going to be my latest video,
my latest upload. And the other one is going to be what YouTube recommends for you. So
feel free to check those out. Don't forget to hit that bell for notifications down below.
And we'll see you guys next time.