This is the first #3dprinting DaVinci episode. in this video we print on an @Artillery3D genius, and use a @Creality3D ender 3 v2 motor to drive the mechanism. in the next episode we will be building a crane from the Codex Atlanticus. please share this video!
Send me a gwei! (ether address, all donations accepted!) 0x95F4EaB8A738F4F27e7c04aEe1E10C8E666C2D0c send me a satoshi! (bitcoin address, all donations accepted!) 31zvj8ybxVVTLw6nPvAHYqu3qDVhC1sRqk
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
AI Generated·May contain errors
Video Summary
AI Generated
This video explores the intersection of Renaissance engineering and modern technology by 3D printing a mechanical gear system from Leonardo da Vinci's Codex Atlanticus. The creator documents the iterative process of modeling, printing, and refining a lead screw mechanism to demonstrate how da Vinci's visionary designs function in the physical world.
Leonardo da Vinci is a world-renowned artist and polymath who lived and worked in Renaissance Italy.
His designs were not only ahead of their time, they were revolutionary, and in this series we
will focus on his engineering sketches in the Codex Atlanticus and use 3D printing to bring
his ideas to life. Welcome to 3D Printing da Vinci, where we wonder, what if this guy had one of these?
This idea came to me while combing through the Codex Atlanticus. I thought maybe I would find
an interesting drawing I could model to 3D print and play around with. What I found was much,
much more than that. The complex mechanical drawings had me captivated, and seeing the
machinery Leonardo envisioned, I couldn't help but attempt to make a few of them myself. There are
several designs in the Codex Atlanticus, however, that may already be familiar to you, so let's take
a look at a few of them now, and perhaps you'll begin to see how I arrived at the conclusion that
da Vinci would have been an avid 3D printing fan. Take, for instance, this unassuming sketch of a
few gears found in the Codex. In the front, we have two gears driven by a central rod that is
essentially a screw, but take a look at the gear on the right. It looks different from the one on
the left because it has this other component attached to it. Now look at the rod passing
through it. Remind you of something? That's right, it's a lead screw. We can assume both
gears would be held in place, and if that's true, turning the wheel would drive the lead screw back
and forth, pushing and pulling on whatever is attached to the other end. Now, I developed my
project in Fusion 360, and I'm going to give you a quick rundown of just how I created the models. So
first I created the main gear, and then the worm gear, and then duplicated the main gear for the
right side. Then I added a handle or lever to the left gear, and extended the worm gear through the
bottom plate, which I added for support. Now, I did also end up adding a top piece to this model,
which you'll see in just a minute, but basically let me break down the gist of how this works.
These two gears are going to rotate, and the center gear will rotate as well, and the action
done by driving that gear will extend the lead screw that we talked about earlier. So we are
basically going to print all these pieces out, assemble them, but first I wanted to talk to you
a little bit more about 3D printing and the process involved, because we're going to be
using that to make all of the parts in this assembly. The type of 3D printing we're going
to be using in this episode is fused deposition printing, meaning we are using a long thin strand
of plastic filament to lay down a continuous layer, and what that looks like is something
like this. So it's going to lay down a single layer at a time, and it's going to start by
drawing lines, and then filling in the geometry required in order to progress the shape. And what
I mean by progress the shape is, once it's completed this first layer, it's going to move
up just a little bit, and it's going to start the next layer. So what we'll do is we'll let
it finish coloring in the form of the first layer here, and then I think we can get a nice view on
the side to see it start to build up. Our final model is composed of these layers put together,
one on top of the other, on top of the other, on top of the other, and so on, until our whole model
is built up exactly as specified, and the print is complete. And here we have it, our first go
at printing the mechanism. And as you can see, if I kind of lift this up here, and if I'm really
gentle and I turn it, it does in fact turn the wheels. Now, there are a few issues with this
design. If you haven't figured out what they are, I will explain them to you, and it's kind of
obvious. There is nothing holding this in place. It kind of just wobbles back and forth, so it
doesn't grab both the gears. The other problem has to do with this lead screw right here, but we'll
discuss that in just a minute. Right now, I wanted to talk about another fun fact about Leonardo,
and that's the fact that he never finished anything. So let's just move on and do something
else. Just kidding. All right, we were going to talk about that lead screw, and the first problem
I had was that it didn't fit. Even though I had adjusted for some negative tolerance, and this was
actually the exact piece that was removed from that, I did have to make a few adjustments, and
that took one, two, and three attempts. This piece finally did fit and screw in nicely, not being too
tight and not being too loose. So those were the dimensions I ended up using to print a longer one,
and by the time this video is over, I will have a full-sized one for this gear, but this one here
is the best I have at the moment as far as length and being the right size. So let's
remove it here, and I'll show you. And I bring this up because this is one of the beautiful
things about 3D printing. They call it rapid prototyping because I can quickly make an
assembly, and if one of the pieces doesn't fit, I can make an adjustment to that piece
and reprint it and get exactly what I need. So it's pretty quick. This piece here took about,
I think, an hour, and that's only because it has to go really slow when printing a tall skinny
object like this. But the gears themselves, they go pretty quickly, and I did end up printing
another one of these bases because I made some adjustments. The first thing I did in my prototyping
in the adventure of developing these gears is to put a top on that gear to keep it from slipping
out. So I made this guy here, and it just goes over the top like this. These are to be attached
in place, and it will hold the gears like so, and it does a pretty good job of keeping that guy from
going anywhere. So it's a little bit easier to turn the wheels, but as you can see, it still
wobbles a bit. So I wanted to make an adjustment to that as well. So the next thing I did was I
whipped up another prototype, and that's this guy. And this guy has this round feature right
here. Now, as you can see, it does have some notches cut out of the sides, and that is so
the gears can pass through that spot. And that basically leaves me with this form factor right
here. So that, once attached in place, as it's not right now, you can see it sliding, if I can
hold it a little tighter, works quite a bit and turns those wheels quite nicely. So I did also
print a bottom that this fit into a little bit better, and I shortened this up a little bit,
and I will show you the finalized version in just one second. But first, let's talk about
this lead screw. So the lead screw screws in like this, as you can see, but it's obviously
just going to turn with the mechanism unless there's a load on it. You see, there's no weight
on it, so nothing's going to push it through. So we'll address that problem before the end of the
video when we test the final product. But yeah, otherwise, that's just a quick run-through of the
different steps I've taken so far. And let's jump to the final version. We will come back to this
base because I have plans for it. We're going to do something cool with the Ender 3 and make the
lead screw on the Ender 3 drive this before the end of the video, so stay tuned for that. But
right now, let's jump over and check out the finished product. Finally, after a couple of
different prototypes and lots of experimentation, we have a working prototype. And I can show you
how it works here, if I can get the handle to stay on it for just a second. Get a good hold on it.
There we go. Now, as you can see, the wheels turn very, very slowly, but they do turn. All I have
to do is rotate the handle. The only problem we're having now, and I'll show you this here,
is that the lead screw doesn't have any weight on it, so it's still just spinning freely. So
we are going to get an assist from my Ender 3 3D printer, and we're going to have it hold the item
and spin the bottom. And I will apply some pressure to this, and we will see how it feeds
through there. So let's jump over and check that out. All in all, this experiment has been pretty
much a success. What I'm going to do now is I'm using the, I've disconnected the Z-axis on my
printer from the motor here, and I've hooked it up to a separate motor. That way, when I run the
Z-axis, it'll turn my mechanism. And I will get you a nice view from the front, but I wanted to
show you first, you can see that I clearly marked where it is in the front and back.
We're going to go ahead and drive some of this through. Now it does go very, very slowly,
so I'm turning the Z the maximum amount it will allow, which is 250 millimeters, and it's not
going to travel very far through the machine, but you should be able to see it through the marking.
So I'm going to hang on to this piece right here, and as I don't allow it to turn and the screw
turns around it, it's going to slowly feed in that black mark. And it does take quite a long
time to actually see the movement there, and that's because the wheel is spinning really,
really slowly. You can see it hasn't even quite made a full revolution yet, and I can still see
a little bit of that black mark in there. Most of it has gone inside the mechanism,
and we'll continue to let it turn. When it stops, we'll look at the back and see how far
out it's protruding. We can actually measure and get a travel distance and say that for every 250
millimeters that the motor is turning, we can get the length of extrusion from the back. And there
we go. We can see our mark there. Let me go ahead and grab my calipers. I have a digital,
pair of digital calipers here. And what we'll do is I have to do it backwards here.
We'll measure the distance, say that's pretty close, and we're reading at 6.14. So for every
250 millimeters we travel with that axis, we're getting about six millimeters of drive on the
lead screw. So I also wanted to show you guys a good front view of this. Let me readjust the
camera here. And here you can see the machine running on its own, just turning both those
wheels. It's a lot easier to see how slowly they actually turn in this case, and the speed at which
they turn is determined by the ratio of the worm gear in the center to the teeth on the larger
gear, as well as the diameter of the larger gears themselves. So if I made those gears smaller,
they would spin a lot faster. I don't necessarily need that. I think this is just fine how it is.
But our assembly and everything seems to be working pretty well, and I think this was a
success. So I have one more fun idea to do with this design, and that is to see if we can
miniaturize it and make a little Leonardo da Vinci fidget spinner. So let's jump over and see how
small we can print this mechanism. This model was scaled down to 45 percent. The parts printed
nicely, and after a little cleanup and gluing it together, everything works just fine. If you would
like to print your own version of this device, I've included the link in the description of the
video below. Next time on 3D Printing Da Vinci, I find a cool crane and hook system that should be
fun to play around with. So be sure to subscribe, and please share this video and leave a like. It
helps people find us so we can make more content like this for people like you. Tech Nibbers out!
Stick around guys, I got another YouTube recommended video for you right here. And if
you haven't already, subscribe, subscribe, subscribe. Make sure that you smash that
like button. We'll see you in the next one. Tech Nibbers out!