Polish Any Stone Like A Pro 💎 Know Your Compounds w/ Diamond Pacific Polishing Pads
Nov 16, 2026
For more info contact Diamond Pacific : (760) 255-1030
or message me in the comment section of any of my videos
AI Generated·May contain errors
Howdy there folks, this is Lapidary Dave
and in this video we're going to be talking about
polishing gemstones. I mean our final polish.
When most people use their wheels
You know, be it silicon carbide or their diamond impregnated
resin wheels, they usually consider that their pre polish.
Final polish usually happens somewhere after 1200 or 3000 grit.
Some people do their final polishing on the right side
of their machines. You see diamond paste on canvas come
with a lot of different machines across the industry.
Some people use something similar to, let's say,
the Richardson Ranch polisher, like cerium on leather or whatnot.
Long story short,
every gemstone really wants to be polished in a specific way,
using a specific type of polishing media and a polishing pad.
I have a couple lists here I'll share with you folks right now.
Feel free to take a screenshot. I am working on
typing out a big list of these types of stones,
what type of
polish they like to use, and what they want to be on.
One of these lists I screenshotted off of Facebook
and the other one was actually sent
to me by one of the awesome people
who help the Victor Valley Gem and Mineral Club.
Check out the Victor Valley Gem and Mineral Club.
I'll leave some information on that down in the description below.
Anyway, yes, some stones can be polished in different ways.
Let's say an agate, you can use aluminum oxide.
side.
But in most cases,
the best polish you can get is usually one way and not the other.
So for agate, you know, cerium oxide on leather.
In some cases, it's not even a pad.
It can be something like...
A cotton wheel. Turquoise loves zam on cotton,
which is a chrome oxide, I believe. They call it
green rouge, but I believe it's chrome oxide.
So what you see in front of you here is some of the
awesome polishing pads that Diamond Pacific manufactures.
A lot of you folks might have
seen the canvas that some people put diamond paste on.
And when I got my Genie, it actually
I actually came with a 14,000 grit Nova.
Um, that goes on the right side of the machine, which is fantastic.
This is the same material
as their world-famous Nova wheels, side-mounted.
Um, you know, 3,000 grit, 14,000 grit from a Nova.
A lot of people say if you do that right, it's plenty shiny enough.
But then again, you know, in the polishing world, you never are done.
Especially when you get into, like, competitive polishing or fastening.
The pads I have here
are rough leather,
smooth leather, felt, and canvas.
So, real quick, rough leather,
a lot of people put Cerium Oxide or Aluminum Oxide, Lindier, Tin Oxide.
Smooth leather, I did speak with Diamond Pacific Dawn,
and, you know, roughly, it's kind of a preference.
Do you like smooth or do you like rough?
But I did talk to a professional cutter
who said he prefers to put his Sapphire powder
for final polishing on smooth leather over rough leather.
I also hear from some professionals that...
The just rough leather has just become a little bit more popular,
but Diamond Pacific does provide both of those. Felt is awesome.
I see some people who polish opals use cerium oxide on felt.
I believe Justin from Black Opal Direct uses cerium oxide on felt,
but then there's tons of different compounds
for polishing many different stones.
As you might have seen in the list,
if I put it up already, in Canvas, I have seen
writings of people actually charging this with more than diamond paste.
Most of the time nowadays,
it's just what you see folks charge diamond paste with.
Diamond paste is pretty cool.
I've never really gotten into it.
I know some people who love it.
Um, yes, as many of you folks may already know from my other videos,
Diamond Pacific doesn't just make different polishing pads
for the right side of their Genies and their other machines,
but they also make a tapered spindle adapter so that you can put
These cotton wheels on the side of your machine,
I highly suggest to one of my best friends,
Mike and Annie, who are professional turquoise cutters,
says if you're going to use ZAM
or like Fabuluster,
it's good to hit your stone with the charged cotton than with a
cotton wheel that is not charged at all and is clean.
And just like the pads, it just spins
right on the right side of the machine.
Spin it till it doesn't want to spin anymore and you're
You can even set up different adapters
that you might have for your Diamond Pacific Genie
to house or to hold different pads.
I have three compounds that were sent to me by Diamond Pacific here.
Cerium Oxide, it does come in many different grades.
Yeah, I'm not a professional when it comes to compounds,
but I do use Cerium Oxide a lot for Obsidian,
Agates, Jaspers, and Quartz,
even sometimes Jade.
they sent me a lifetime supply of aluminum oxide. a lot
of folks even use this stuff for tumbling.
aluminum oxide is what i see folks
who polish like nephrite jades and jadeites jades um use.
also lindie to my knowledge lindie
is aluminum oxide just a higher quality. but what i was
really excited about
when i talked to Don a little bit about is this stuff tin oxide.
You don't see a lot of tin oxide being sold very many places,
and in one of the writings,
I think they suggest a tin on cork, or tin on cork, or rubber, or wood.
I just knew the pad they were suggesting for the tin was really weird.
It was in the older of the two write-ups.
That I shared with you folks earlier,
but I was talking to Diamond Pacific Don.
He said that it used to actually be more expensive or rare,
I don't remember, than aluminum and
cerium.
And so those became really popular where tin oxide
is absolutely a secret weapon for certain
types of stones and then certain type of applications.
So I'm really excited to get
in and try some tin oxide when it's appropriate.
Um, for this video, I don't really have anything
that's going to serve the tin oxide.
Just know that it exists.
Do your research, find out what it's going to work for,
because like I said earlier in
the video, every stone,
every single stone has its favorite compound and where that compound
wants to be on to polish it the best.
In this video, we're going to put on the leather pad.
And I'm gonna show you two different polishes
on a piece of agate or jasper.
One being polished with this cotton charged with zam,
which is very common.
Um...
You know, people polish everything with zam.
It doesn't work very well for everything.
And then we're going to polish that same stone with leather
and cerium oxide.
And you will see just how awesome an agate will look
when it's polished the way it wants to be polished,
which is with cerium and leather.
All right, we're going to take the tapered spindle adapter off.
When I found out that they made a tapered spindle adapter for a genie,
Um, I was really excited. I love that. I love that.
I use it every single day. I cut mostly
turquoise, so it's so cool.
And it's super affordable, so everyone should have their
a tapered spindle adapter for their genie.
Just as excited for, uh, this leather.
Nice rough
calf leather, kind of the calf leather, I assume.
You're gonna want to take off the sticker.
And, yeah, you don't really have to do any priming or,
like, breaking in of this.
I can't really speak for the smooth leather.
I'm not too familiar with that.
But, yeah, the canvas and the felt,
those are also good to go right out of the package.
um some people might want to charge this before they put it
on the machine some people like their
leather super saturated with their compound i'm going
to go ahead and just put it on here and
then with a paintbrush i am going to create a slurry of my cerium
and paint it on to the wheel
just which you'll see here in a moment i got it
on there nice and neat if you do lots of agates
just like i said before you can leave
an adapter with that on with your agate wheels
You know, when I polish agates, I use,
I go from 220 Hardwheel down to 140 Nova,
which will leave finer scratches than the 220 Galaxy Hardwheel.
That's just the nature of diamond impregnated resin.
As in, um,
But I'm actually going to start using a 60,
then jump to 140, then continue back to 280.
So I'll probably have an adapter just dedicated
to agate stuff where I'm going to leave my
leather. But enough talk, let's get this charged
and let's do some polishing
demonstrations and comparisons.
Alright, for our demonstration today,
I'm going to be using this weird, beautiful Jasper
hand cut by Diamond Pacific Don.
He is a great cab cutter.
Nice girdles, perfect 11 degrees.
He uses the cab rest on all of his pieces.
That's the difference between a good
cab and a great cab, is that girdle.
You know, that's what a professional silversmith looks
for when they are making their pieces.
So what I'm going to do is I'm going to take this down to 3,000 grit.
I'm going to start with 12 and bounce over to 3,000.
We're going to polish it with Zam.
Take a look at the finish.
Then I'm going to do the same and hit it with Cerium.
And I should get a polish as good
as this or even better from the cerium.
Not expecting much from the zam,
but then again that's what we're talking about in this video.
What stones, like what compounds, and how to do it,
and also that Diamond Pacific has you covered
with any of those polishing compound or pad needs.
All right folks, as you
can see, pretty glossy,
downright shiny just
from 3000 grit.
Not all diamond-impregnated resin wheels are created
the same Diamond Pacific makes, you know.
But now we're going
to hit it with some Zam,
see if we get any difference.
It's luster. I don't expect we will.
We might even actually lose
a bit of brilliance.
I'm using the wrong compounds,
and that's a common thing that can happen in lapidary.
If you use the wrong compound,
not only will it not work, but it might even...
uh i'll hurt
the finish. so this
is before the Zam
and this is
after. definitely
can tell a
difference actually on this particular material. but we're going
to get this even better with
cerium oxide which is a compound
that works really well with jasper. you see
sometimes you can check how much further
a piece can even go by wetting it. if it gets any darker
or the color is a little bit more brilliant from it being wet
then you can you know pretty much
tell that a better polish would even serve
the stone. you could see on the browns there how much
darker it gets when it's wet than
when it's dry. this piece could go a lot further than uh 3000
and then ta-da. so what i'm going to do now is put
on the leather pad we're going to charge it
I'm going to show you how I charge my pads.
Then we're going to do a final polish from 3000 grit.
I'm going to take it back down.
All right, folks.
So now we're going to charge this wheel.
I have my super cerium here.
I got some paintbrushes here.
You don't want one too big.
You know, if you're using something like a Richardson or something,
you're probably using a straight-up house paintbrush or something.
But this will be fine for what we're doing.
Most people will have, like, a dedicated cerium tray.
You know, it'll dry up
and you can reconstitute it. It's not a big deal.
For the sake of this video, I'm just going to put a little bit of water
in the lid of this cerium. All right, got that.
Don't want too much. I actually might have,
actually, yeah, in my opinion, I added too much water to this cerium.
You can always add more
paste. Yeah, that's what I'll do.
And more powder. You kind of,
you kind of want it to be, uh,
Definitely just thicker than I, I just put too much water.
It's fine. So now I'm literally just
going to paint it all over this pad.
Try not to make too much of a mess. It's probably definitely
better to take, take the wheel off folks.
Don't be like me. This is my machine, my machine. Um,
I think I'd paint it on there.
I don't know if I'd be being on there, but this is a Miss Sandy
and Jim's. So we're going
to take care of it better
than we take care of it.
All right. After
After making our mess, we're ready to put this on the machine.
I've asked a lot of people about this.
Some people continue to charge
their wheel as it's spinning
by just continuing to put on cerium
Some people say it's not that big of a deal.
If it's charged well enough to begin with, it's good.
Some people think since it's like spinning off the compound,
maybe it's good to put it on there.
I can't really answer which is the best.
If you're putting it on there right, it should be good to go.
So now we're going to hit this piece.
Let's get a little before and after.
Here
is our 3000 pre-polish.
Let's see if we can get a noticeable difference on camera.
So you do wanna keep the stone a little bit wet.
I can just dip it into the tray
or you can spray some water on here.
You do wanna keep it wet.
And then different stones,
they want a different amount of pressure.
When you're doing, let's say, turquoise on zam,
you don't wanna put a lot of pressure.
Pieces like obsidian and quartz on cerium and leather,
you want a lot of pressure.
So I'm gonna try to get a good amount of pressure
without putting enough to snap the piece.
But I definitely don't have to worry about the torque
on that
one,
just so
you can
see it.
This is my new favorite cerium polishing wheel.
Night
and day difference.
Look at this.
Boom.
As good or better than before we started.
Let me dry it off.
There was one little wet spot.
You can't judge this stuff if they're wet.
That is glass.
polish that is not wet that is dry cerium oxide hopefully i'll
be able to hold this to the side
and do a split screen comparison of the Zam finish
and this finish that's the way it's supposed to
look folks get a little bit
of water doesn't even darken up nothing you see how the color's not
changing nothing it's as colorful as it's going
to get that's a professional finish right there
on a Diamond Pacific Genie if you folks have a Genie get yourself um
A set of, I would say, at least three of those pads,
the felt, the rough leather, and the canvas.
Or just get the leather. I mean, it depends on what you're cutting.
I can go on and on. I'm just excited. I'm totally excited.
Don't be like me.
Don't make a mess in your friend's shop.
And always cap up your compound when you're done.
I was just too excited.
I hope this was helpful for you folks.
Even for those of you that do not have a Diamond Pacific Genie,
you can, um, yeah.
Do a lot of the same techniques
and stuff that you just saw right here on different styles of machines.
And maybe even with a Dremel until you can get yourself
a Genie, Titan, or Pixie.
And if anything, I hope those two lists in the beginning of the video,
which I guess I'll share again right here,
are helpful for those of you that want to know what stones want
to be polished with what compounds on what type of pads.
If anyone has any questions on the Diamond Pacific polishing pads
or compounds and such,
feel free to call Diamond Pacific directly.
The phone number will be down in the description
section below. Also, you can always message me on any of my videos.
I try to answer every single
comment, a respectful comment.
And if you want professional polish on your cabs,
make sure to
Make sure to use the right compounds the right way.
The difference between a polish like this
Um, which was pretty much achieved by Mr. Don,
um, is the difference between it's selling
to a hobbyist and a professional, a silversmith or,
you know, someone who's just going to
resell and stuff.
Great piece, great polish.
Wonder what it is.
If anyone has any ideas, feel free to let me know.
And until next time, folks, I love you.
Always here to help.
Get yourself some.
This video is brought to you by Diamond Pacific Tool Corporation.
Diamond Pacific is America's
favorite diamond tool, wheel, and lapidary machine manufacturers.
For nearly half a century,
Diamond Pacific has set the industry standard
for diamond lapidary equipment.
Join the majority of professional lapidaries
and choose Diamond Pacific products such as their Nova
Wheels, Pixie, Genie, and Titan gem makers,
as well as their wide selection of other high-quality
lapidary diamond products.
Check out Diamond Pacific today and find out why they're considered
America's premier diamond lapidary tool manufacturers.

