DON'T SHAVE YOUR BEARD! DO THIS! Beard Trimming Tips from a Barber

jjaybeardedbarber
57 followers
21 Video Views·Aug 20, 2026
What's up everyone it's your boy jjaybeardedbarber and I am back with another how to trim a beard tutorial on yourself! I hope you guys enjoy it and learn something new! Make sure to subscribe, like, and comment down below!
Beats by Timothy Nersy
Follow him on instagram @tnersy
Follow me on instagram @jjay_beardedbarber
Hand Razor sold at thebeardedbarber.co
Derma roller
https://amzn.to/2CdkqSM
Razor blades
https://amzn.to/31RwjZx
Tomb45 Shave gel
https://amzn.to/2ZJO2Q9
Gammaplus clipper & Hitter Trimmer use "jjay10"
gammaplusna.com
P3 Modified blade from Aztroo use JA-3 to get 25% off your order
3versince.com
What's up everybody? So today's video is going to be very simple. It's going to be mainly
on how to fade out this line that right here I created. Push down my beard a little bit. So this
is for you know if you went to a barber or if you're cutting your beard at home and you were
lining your beard up and you kind of pushed it too low but you don't want to shave your beard
off because you don't want to have a baby face. So this is going to help you guys trim down this
area so that it looks all even and that you'll have a nice and natural beard lineup. I'm going
to be razoring it on top. I'm probably going to pluck some hairs and define that line a little
bit. It's going to be kind of like a reverse fade so you're going to be going from very short into
the long beard. We're going to line up the neck, line up the back, just clean everything up. So
first starting off by using a clipper. This is my gamma clipper. This is compatible to any wall
clippers so if you have any wall clippers at home it'll do the job. The highest guard you'll need
is two but we probably won't even touch this because how long my beard is. It's pretty short
so about a two guard, one and a half guard, one guard, and then your half guard. Okay those will
be the guards that you need. This is the wall system. I realize that more people probably have
the wall system at home compared to the Andes so that's why I'm going with the wall system right
now. Just a brush, comb, trimmer to line up the bottom. I'll be using my handle razor just to
shave the bottom just to get an extra closer shave. Before we get into the beard trimming,
I do this intentionally bringing down my beard lineup because I'm trying to get these lighter
spots in here and over here to grow in and as you can tell I'm starting to grow a little bit new
hairs in this area and that's due to you know pushing my beard down for a couple weeks, lining
that up, getting it nice and sharp. I do that so that I could get new hair growths and as I'm
pushing the line down, continuously brushing my beard. As I say in my other videos, I have other
videos on beard tips that I'll have on top of here so if you guys do want to check them out,
go ahead. Brushing really helps because it stimulates blood flow, it's itching the skin.
Also something new that I've been trying out, derma roller. I've seen a lot of people using
this so I was like I'm going to try it out but pretty much has little spikes, little
needles in there that penetrate the skin. So I've been doing this lately just in these areas
down here like so and what that's doing is piercing the skin, sending blood and oxygen
to that area. It's repairing the skin and over time it's going to create new hair follicles
plus if you throw the garlic tip that I have, if you've seen my previous videos,
you know what I'm talking about but rubbing garlic in these areas. Also using the derma
roller, mixing with that plus brushing over time is going to keep stimulating blood flow
and new hairs will start to appear over time. That's what worked for me in my whole journey
so it could be something that helps you out. I'm going to try doing this for like 30 days and see
if I see some good results. Those are some things I do as I push down my line so that I could grow
new hairs and keep growing my beard higher and higher. I like hairs all the way up here so that
this beard, this line up up here will look as defined and as high as possible. First start
with our clipper, test the waters. So testing the water is pretty much getting a bigger guard
and seeing how much comes off just so we know what guard to reference and knowing what the
length is. The one and a half guard open, open the blade all the way so it's at a longer length.
This is closed so it makes it shorter. This is open so it makes it longer and I'm just going
to go with the grain just to knock off some length, let the hair lay down more evenly.
Now we're going to flip it over and close it. We're going to attack that line so we eventually
want to fade that out. Throughout this video you're going to slowly see that line disappear.
First went open with the grain, didn't really take much. Kind of just laid the hair down,
closed it. You can tell it lined it up a little bit more. Now we're going to open it back up and
we're going to kind of just blend it into that line that we created. Also your beard is never
going to be perfect on both sides. There's always one side that's a better side, the hair grows
more full, the hair pattern's a lot better. So that's why brushing and combing really helps
because it trains the hair. Same way as you brush your hair backwards if you want to slip back,
just train it to lay backwards. Same thing with your beard, you want to go ahead and train it
to go down and in the direction that you want it to go. We're going to grab our one guard,
completely open and we're just going to attack that line again. As you guys can see,
starting to finally fade out into that. Okay, and we're pretty much attacking the same area. I'm not
going all the way down here. Pretty much attacking that line and seeing what's happening. And then
if it takes off hair, great. Keep working. If it's not taking out hair, that means the guard is too
big and you have to go down in a size. But since we are one open, say it wasn't cutting hair,
you would just close a lot of hair slowly. And so you got to completely close. And then if that's
not cutting, you would take the guard off and go to the next guard, which would be a half guard.
And just to be consistent, just take that and do it to the other side. Just so you know where
you're at. I closed it halfway now. Now I'm going to close all the way. As you can see,
this side is pretty much almost all blended out now. So now you can see how much higher my beard
is. It makes it look a lot more fuller, wider and bigger of a beard compared to when the line's
lower. It's usually more natural because as you keep lining up, especially if you have a thicker
beard and I'm a Syrian, so like our hair grow back super fast. Like not even a day later,
honestly, I already have stubble coming back and then I got to reline it. And then that's how you
push down your beard because you keep relining it so often. I recommend people, if you're going to
line up your beard to look good for work or things like that. I know right now, not a lot of people
are working as much, but you just got to look good in general. Say at least two days in a week,
you can line up your beard, like say on a Monday and then like a Thursday would be a good time to
line up the beard. Begin the week, get nice and sharp. Middle of the week, it's probably grew
back enough, reline it again. But as you guys can tell, it's pretty much blended out. I'm going to
kind of knock down my mustache because now my mustache area is a little bit, a lot darker.
Go back to that one and a half card and then close it up. I'm just going to go with the green
and start lining up everything else. The reference point for the bottom line is either
if you want to grow a bigger beard, like a two, three, four, five month beard, I'll say,
take your Adam's apple and just put one finger. Boom. So this is where you create your line.
Bam. But since I'm going for a more short, natural looking beard, summer beard,
I'm going to go two fingers. So Adam's apples right here, two fingers above it. It's pretty
much where I have it and I have it coming up on my jaw. So it outlines my jaw a little bit more.
Combing my beard out because I want that more elongated, short back here. Come long, look up.
So I recommend starting in the middle, go to one side, go back to the middle, go to the other side,
see where it's off and then fix. There you go. And sometimes the bottom line would be straight.
This is if your beard is a little bit longer. The bottom will be straight, but since you have
longer hairs up here, they could be hanging over and making the line look off. So sometimes you
have to reshape your beard up just to make that line straight. So I'm going to leave all this
because like I said, I'm going to take my razor. I'm going to shave it to get a closer shave.
So we'll move on to the back, line up the mustache, line up the lip area. I'm also going
to clean up in here just so I could keep growing hair in here. So the back of the neck, I've done
this so long since I've been like 15, 16. I just turned 25 yesterday. So it's been about 10 years
since I've been doing this. So I kind of have the feel for it now, but if you have another mirror,
you can go ahead and mirror it and then line it up like that. So this has always been my better
side of my beard. This side is always more difficult because how my beard, how my hair grows.
Now we're going to go ahead and just line up the lip area, natural. If you want,
you can do like a little smirk and that lets the hair hang over a little bit.
Now all we're going to really do is line up the bottom part, maybe do a little bit of sculpting,
double check everything, pluck whatever hairs we don't need. That's pretty much going to be it.
Using my own metal razor. So what I like about this razor most is the weight of it. It's very
nice. It's got a good weight to it. I recommend always using a hand razor compared to a Gillette
razor that has a four blade, three blade is this is very simple to take apart. You don't have to
get new razors each time. Blades are a lot cheaper, but all you really need is a great razor blade.
It's a single blade. Just drop that in there like that. The top piece on and you just screw it back
in. Okay. This handle will last you years and years, especially if you take care of it. Blades
are a lot cheaper than getting Gillette blades. You get a pack of a hundred of these blades for
$12 compared to buying a three package Gillette for $20, $30. And if you're shaving often,
that adds up a lot. Single blade I've found causes less irritation on the neck area. It's also a
great substitution for if you don't know how to use a straight razor, this gives you the same way
you got that single blade on there. So you could get really precise. Do you want to go ahead and
purchase your own? I appreciate the support and the link will be down below to my website. Grab
some shave gel using 2 in 45 shave gel. I feel like they have the best shave gel on the market.
Bottle lasts you forever. Just get a little bit, rub that in. So you have two sides. So like I said,
you could swipe up, switch, swipe up, clean off and let the razor do all the work. And a good tip,
so you don't cut your Adam's apple, just push it to the opposite direction. And there you go. Very
simple, very smooth. Now take some cold water, just to close up those pores. Next step is just
clean up the cheek areas. I'm going to be plucking them. So I'm going to be plucking them. I'm going
to go ahead and pluck the cheek hairs. I'm going to do a little bit of sculpting to my beard,
kind of make it look more chiseled. All right guys, so my phone ended up running out of memory.
So that's why, you know, you see the clothes changed. Everything's already done, but pretty
much you didn't really miss too much. All I really did was I took my tweezers, finished
tweezing all these hairs, grabbed my clipper and just shaped up my beard a little bit. Got the
bottom, kind of just round everything. Just got the stragglers, cleaned it up, made it look a
little bit tighter. And then just to finish everything off, I went ahead and put some
beard balm in there. Scruffy Jacks today, they have a beard balm and they have a beard oil.
Natural product. So I really enjoy their product a lot. Not sponsored or anything with them. This
is just a product that I enjoy using. My girlfriend likes it a lot too. She actually likes the tobacco
bay leaf one. It's more of like a natural leafy, woody, like woody smell. So they have a grapefruit
one, which is a nice citrus smell. So I like both of them a lot. My girlfriend liked this one more.
I kind of like the grapefruit more. New company, so I like to support small businesses. So if you
guys do want to go check them out, I believe they have been 20% off on their website when you first
sign up. So go and check them out. Pretty much it guys. That's what I did. Kind of like a reverse
fade. As you can see, it goes from short all the way to long. If your beard does get pushed down,
you don't have to go ahead and shave off your beard and do all that. You just trim it down a
little bit, get it all even, let it grow, and you'll be good to go. Right? So I hope you guys
enjoyed that video. Hope you guys learned something new. Make sure to subscribe, make sure to like
the channel, comment down below. Let's engage. Let's talk. I'd like to answer your guys' questions
and stay tuned for the next one. Right? See you guys.
