Welcome back to my channel. My name is Jacob or you may know me as jjaybeardedbarber! I hope you guys enjoyed this tutorial and gained some value and knowledge from it! Also, let me know what you guys think of the new camera. Make sure to like, comment, and subscribe to the channel!
-Follow me on instagram @jjay_beardedbarber -Beats by @Weedybeats Check him out on Instagram
Links to all the products I used will be down below!
What's up everyone welcome back to the channel
As you guys can tell the quality of the video is so much better now. I just got a new canon camera
So that's what i'm recording right now. No more iphone previously. I was recording on my iphone x
But now we add up the quality so I got a new camera. So I kind of started this tutorial a little bit late
Um pretty much what I did here was I took that one and a half card on the wall system
And went all the way up to the ridge of his head not too high
But just enough up right enough room where I can do clip over comb and we're doing a high taper
So as you can tell i'm taking off his c-cup and then we're going to be balding him out
All right
So that's the first step right there getting it nice and bold and we're going up and flicking out towards that line
I'm creating too harsh of a line. So that's easier to fade
We're going to go ahead and take our clippers, this is my gamma ergo clippers. These are the best clippers in the market right now
Um blade completely open and we're going to slowly take out that line
So we started completely open return the lever halfway and now we're completely closed and we're just attacking that line
With these clippers what I like most about them is they got the notches on the side so you can just notch down each time
Also a lot of power and they fit great in your hand. So next we're moving to the one guard
Uh, this is completely open
So previously like I said, we took the one and a half guard and went all the way up to below his parietal ridge
So the next guard below that would be the one guard
So we're using our one guard completely open and we're just going to slowly close it down until we have it completely closed
And this guard right here will not remove that line. All it is is lining up the line
So it's a lot lighter and easier to take out with the half guard, which will come after
Sorry about the whole auto focusing. That was this is my first time recording with it. So
It was kind of I had to get used to it
I wasn't checking it as often. So now we're moving on to the half guard the 1 16th guard and starting with the lever completely open
And then we're just working away hitting those dark spots as you can see more closer to his ears a little bit darker
And more closer to his vertical bar is a little bit lighter
So we're going to be focusing more on that area around his ear and just lining up that area
Okay, this will completely blend into the blade completely open that we had initially created
And if it doesn't completely take out that line go ahead and take off the guard and just have the blade completely open
And use your corners as well
This is one of the techniques that i've, uh used to fade. I do have multiple different techniques that I use
Just depending on what clipper i'm using
But that is on the wall system. And now we're just edging up the corner real quick. And now we're going to do clipper over comb
This this angle isn't too best to see how the clipper over comb is later in the video
I have another angle of the doing the other side
And that side you can really see how i'm scooping in and pulling the comb out and getting that nice square shape
And blending right into as you could tell that clip over comb blended right into that one and a half guard
This is I believe this is the motive comb that i'm using
So I got off motive this page. They sent me a care package
So that's the comb that i'm using if you guys are curious i'll put the link i'll put the
Tag of it down below in the description
But now we're just edging them up keeping it super natural just give them a nice sharp line
But not pushing them back or anything like that
And we're just edging up going over multiple times getting that line as crispy as possible and then we'll follow it up later with the razor
Also this haircut we were doing a hard part
So i'm going to go ahead and put in the hard part
It's kind of hard to see but I just flipped the trimmer over
And i'm just dabbing in there making it very thin
i'm not trying to make a thick line because after this like I said
You're going to follow up with the razor and the razor is where you could thicken it up in certain areas
Depending on how the client walks likes it. So make sure to consult with your client
You want the line a little bit thicker you want it very thin
So it looks like a natural part, you know, you discuss that with your client during the consultation
All right now we're moving on to the back and this is going to be the same step
We're balding him out in the back as you can tell this is kind of a high taper
the reason why I do a little bit more high tip on the back is because he has a calic on the bottom of his
uh
Bottom of his neck and the reason I go a little bit higher because I go right up past that
So it doesn't give me any trouble. So i'm not sitting there trying to fade it out wasting more time
Um, I feel like it fits his head a lot better this way when you see it from the side
It looks nice. It looks very sharp. It's kind of like a drop fade in a way, but it's still a taper
So then we're going to go ahead and bald them out as well same steps and then we're going to start with a blade
completely open
That's also that's also a little tip
If clients do have calyx on their tapers in the back
Don't be afraid to go up a little bit higher or arch it do a half moon
Or whatever you can to take out that part so it gives you less trouble so you're not sitting there
Turning your clipper and hurting yourself trying to take out that
calic area
And here we have the blade completely open starting our first guideline
Going up about an inch, you know, this guideline is really crucial. So you want to go up about a good inch
So you have enough room to fade out and remove that bald guideline
After that the other guards you could go a little bit smaller. You don't have to go as big of a guideline
So we're going to follow that all the way through
So now that we have a full inch guideline how we're going to break that down is so you have one full inch guideline, right?
That's the blade completely open
After that you want to there's four different notches. They're going to hit you're going to hit completely open
Completely closed
And then two notches in between those two so you got completely closed
Then you have a quarter of an inch open
Then you have a half an inch open and then you have completely open so you have four steps
All right, and you're going to break that down within that edge. So you have a full inch guideline
You're going to attack that very bottom line going up a quarter of an inch
And then after that you're going to open up the blade a little bit more and you're going to go up another quarter of inch
So now you're halfway through and you're halfway open with your clipper
After that you're going to open up a little bit more and you're going to go three quarters of the way up
So pretty much hitting that top line
And after that you're going to go completely open
And pretty much go right over the guideline that you just created and that's how you're going to remove that ball guideline
And you're going to get a nice clean transition in your fade. I hope that makes sense
I hope you guys can kind of follow along what i'm doing
But that's pretty much how I break that ball guideline
You really have to go up in your guidelines in order to get a nice transition fade
If you don't go up then you're not going to have a nice transition fade
And then like I said, the next step is the one guard completely open
And this is going to fade right into that one and a half guard that we started our full base base with
I hope that makes sense
Now moving on to the neckline you want to keep this as natural as possible
You don't want to dig in there and get it to you know, push back and have it grow backwards
So i'm keeping it nice and natural i'm using my gamma hitters right here with a p3 blade on there
Which is a modified blade i'll have all the links
For I'll have all the links down below in the description if you want to purchase your own to check them out
But as you guys can tell it's making a nice sharp line keeping it nice and natural
And as you guys can see the taper is really popping and it suits his head shape a lot better
He has kind of a longer neck. So I was able to go a little bit higher with the taper fade
So how I work is I usually do one side at a time or sometimes i'll go all the way around
It just really depends on the client. I change it up. I don't try not doing the exact same thing every time
It just keeps it more interesting
So i'm going to go ahead and knock down his mustache and do this side of his beard
Just so that's besides all done. I'll have to do next is just work on the next taper on the other side
so
The beard we did the same with that. We did the base on the haircut, which was the one and a half guard
and then
This is just a little technique to speed up time
If you flip your clip over and kind of flip out like that
Or scoop out like that. It kind of fades right into the beard. It's a little technique that I learned
It's a little bit more advanced so don't try it unless you're confident in it
And then we're going to go ahead and line up the mustache area. Keep it nice and natural right above the mask mustache
Right above the lip my bad and then we're just edging up his goatee keeping it nice and clean
Don't worry later on throughout the videos. I get better at my angles and making sure you guys can see everything
But this was my first video like I said, so bear with me
Now for the neckline of his beard since it's a little bit weaker on the bottom
I'm keeping it right below his jawline
So it'll make the beard look a lot more fuller and it won't you'll kind of hide the patchy areas that he has
And i'm just going to remove all that bulk and then follow up with a shaver
keeping the beard looking as full
and
Natural for his beard because everyone has different beards. So you'll want to make the best beard for what the person has
All right. Next step is we're going to follow up with a razor go ahead and just edge up everything that we lined up
Get it nice and crispy
And if you guys can leave a like or a sub down below for the angles that I begin for you guys
Look at this i'm squatting right here. My quads are on fire
But hey, I got to get those angles for you guys. All right, but just stretch the skin
lead with the
Front point of the razor and go to the most fullest area and if you can't get a sharp line
Make sure to have them blow a bubble in their cheek so that you can get a more straight and sharp line
Usually on the left side of the i'ma righty so on the left side
I don't really need them to blow a bubble but when it comes to the other side
It kind of helps just because of the you know being a righty
But that was the first pass came out kind of sharp, but go ahead and remove everything comb it through
And make another line getting as sharp as possible. Okay, you want to go over it about two to three times
To get that nice sharp crispy line
You want to keep as full as possible not pushing it down
But you have to go down enough to where you get to the fullest area
All right right here you're going to see a better angle of how i'm using my clipper of a comb
But you can see it's slightly angled i'm scooping in and then I pull out and i'm connecting with that one and a half guard
And then the long hair so on the very bottom of the comb
You can see that's barely hair from the one and a half guard and as I scoop out I remove all that excess there
Which gives a nice transition from long to short hair and keeping the hair
The head shape squared so it doesn't look round and it suits the client the best that it can
Now we're moving on to the other side
So i'm going to go ahead and just be quiet and let you guys
Listen to the dope music in the background and follow along for yourselves. All right
I also apologize right here the camera cut out. I didn't know so you guys didn't see the bottom neckline
And also lining up the side of the beard
But I apologize for that, but as you guys can tell
Both sides are looking super crispy. My boy's coming back to life
You can see the symmetricity on both sides both of them being as symmetrical as possible
So always step back look at your client see where the curve is coming is it coming, you know below his lip
Is it above his lip? Is it right at his lip crease?
All that just to get you know a good reference point of where you need to put the line at
This is a tip always comb the hair to the direction of the lines that you've created
So as I've made those vertical bars, i'm combing the hair to that area and i'm using my scissors to cut the excess off
So no matter where his hair moves, it will not go past that line and there won't be any overhang
Same thing with the hard part. You can do the same thing with beards
Lineups eyebrows. It's a good tip to do so the hair doesn't move outside of the lines that you establish
Also after I finished the guides after I finished clipper of a comb
I always follow it up with scissor of a comb because this gives the the nice polished
Flawless look it have helps with the transition going from light to dark and it's the best way to finish that haircut
Clients do actually appreciate it when you do use scissors on the hair
All right. Now we're moving on to the top go ahead and get your spray bottle
saturate the hair
Saturate the hair as uh good as possible
You want the hair to be nice and wet move everything to the direction?
Where the calic is moving where the hair style is going to be I like to
Get the hair wet and push it to the direction that i'm going to be styling the hair
So he's getting a comb over so i'm combing all over to one side
If he was doing a slick back i would slick it completely back
So once you get the hair all nice and saturated
We're going to go ahead and start trimming the hair. So since he's coming i'm just getting a cleanup
His hairstyle has pretty much been the same. It's not like he came in with a lot of hair
This is how I do the trimming. So start with the front pull it nice and up nice good tension
and then
He wanted about an inch off. So I cut an inch off and then just follow that same direct guideline all the way back
So this is the traveling guideline. So as you pull up I can see those short hairs cut all that off
and
This sometimes people do wrong because they'll go too short in the front and then the back will be longer
So make sure in the front you pull up a little bit higher
Because the front of the head is a lot shorter than the top of the head
So the top of the head is the apex area and that's the highest point of the head
So when you're doing the front guideline, you want to make sure you're pulling up a lot higher
So that the front is longer and it goes shorter on the way back
Then you're just going to move to the right side of his head and then you can see obviously the guideline and you're just going
to connect the two
And you just follow that all the way back keeping it consistent
Now we're going to be moving on to the side and we're coming doing this side. We're connecting the long hairs
Between the clipper over comb and from the top that we just cut so as you can see
There's a little bit excess there. You just cut that so you get a nice transition from the side to the top
So everything's just connecting the dot
You want to connect what you did with the clipper of a comb the one and a half guard to the long hair
And as you long as you break everything down, you can connect the dots and get it nice and perfect
So now we're just double checking. We're cross checking. So we did horizontal sections at first
So now we're doing vertical sections and as you can see you can see what hairs are long what hairs are short
What's uneven and this is how you get make sure to get the most perfect haircut
Make sure everything's nice and even
So that when they go home and wash out their hair, they don't got long hairs on one side shorter hairs over there
So make sure to always cross check if you first start your guy line with a horizontal
Section cross check with vertical you start with a vertical section cross check with horizontals
Right here. I'm putting some oil serum in the hair and what this does
Is prevent the hair from heat damage because i'm about to blow dry his hair
So I always like to put an oil serum in his hair so it protects his hair
Also, it does give it a nice polished look to the end results after you blow dry it
And it you know, it just protects his hair smells good and it just makes the hair
Flow a lot better. So now we're going to go ahead and blow dry his hair nice and dry
Make sure it's fully dried and we're going to be pushing the back to the side a little bit
Also, whenever you're working whether it's blow drying or razor work or fading make sure you're comfortable
Make sure you're standing in a position where you feel comfortable
The clipper feels good in your hand or the blow dryer feels good in your hand
Make sure you're in a comfortable position if you need to move your client's head
You need to turn him or have him look a certain way. Don't be afraid to tell your client that because
You're the one cutting
five
10 12 clients 15 clients a day
So you need to make sure that your body isn't in weird positions and you're hurting your back or your legs or anything like that
so make sure
That you move your client away because you're the one cutting hair all day
And right here is pretty much what I was saying like kind of combing the hair and cutting it towards the line
So since he had the hard part, I kind of combed his hair just straight
Like as if it would be styled forward and I cut whatever excess was over on that hard part
So that when he styles it
It's very easy for him to distinguish where the hard part is and there's no excess hairs going over to the hard line
All right to finish off the cut we're going to go ahead and throw some product in there
This one had like a low shine not too nothing too crazy of a shine good hold
I feel like it suited the haircut nicely. This is all completely natural
No, uh enhancements. Nothing. This is a complete natural look. He doesn't like any of the enhancements
So this is how you get a nice natural look you can still get a sharp line crispy fade without any enhancements
But the enhancement would definitely take this cut to the next level. This is my favorite styling comb right here. It's the fishtail comb
Um, I like it a lot. I got this from barber nova
I'll have the links down below but we're gonna go ahead and throw some aftershave
I always like to throw aftershave to finish off the cut
Clean up everything, you know, make sure his skin's feeling nice and fresh after I do the aftershave
I always follow it up with a blow dryer. It just feels good feels nice and cool
Hope you guys enjoy the video. That's the tutorial make sure to like comment subscribe
I got a lot more new tutorials and videos coming soon on this
Crazy quality the cannon's dope. I truly you know, you always got to invest in yourself get new things
So this is the africa. I didn't get it before so i'm sorry, but other videos I do
Make sure to like comment and subscribe and i'll see you guys on the next one. Right i'm out