Barber Tutorial: How to do a High Fade + Beard & Scissor Work!

jjaybeardedbarber
57 followers
1 Video View·Aug 20, 2026
Thank you everyone for Watching! I hope you guys enjoy the tutorial and learned something new! Make sure to smash the like button, share the video, subscribe to the channel, and comment down below!
Links for Everything will be down below!
Follow me on Instagram @jjay_beardedbarber
Follow my brand on Instagram @josephsignatureline
Beat by my cousin @tnersy
Turkish Straight Razor can be purchased at www.josephsignatureline.com use "joseph10" to get 10% off your order!
Gamma and Style craft Clippers and Trimmers can be purchased at www.gammaplusna.com use "jjay10' to get 10% off your entire order!
Hey, what's up YouTube fam? We're back with another tutorial. This is a transformation on my boy Ronald. He is from Philadelphia
He actually came out here to visit some family. So this is my first time cutting me cutting me cutting him
He found me through Instagram. So stay tuned so we can see this transformation, right?
All right, so since this was my first time cutting him
I want to go ahead and start off with the top so I could make sure that the hairs cut evenly
He didn't want to take some length off and I could just set the whole structure of the haircut from the top and then fade
Into that so we're just gonna go ahead and saturate the hair
Next we're gonna take two sections on the top of his head
We're gonna be taking vertical sections and they're gonna be about two fingers width apart. I
Believe he just wanted about I want to say about an inch off the top just so you know, nice little trim
So we're gonna go ahead and pull that hair up nice and tight high
Keep nice good tension and we're gonna take off about an inch and then we're gonna follow that same guideline all the way to the
back
After that we combed everything to the side
So as you're watching this we combed all to the left side and now we're gonna take horizontal section
Meeting our guideline that we've made in the middle
So as I pull to the side, you can see as I'm pulling back up
you can see where the short hair is closest to the to the right side of my hand and
Then you just cut and meet those two in the middle and each time you're moving forward
Closer to the front of his head. You're taking a part of the previous section
So I would say, you know cut that section in half and connect it to the next section
So you can still see your guideline
You don't want to take too much of the next section because then you're gonna lose your guideline
as you can see you can see the short hair that I cut previously plus the guideline from the
Original guideline we made in the beginning and then you just meet them all up and after that we're gonna take the front
Then we're gonna pull that all the way back just checking our work making sure everything's nice and even
All right, so now what we did to one side we got to the other side
so I'm gonna take about middle section where I'm taking part of the
Left section that I had previously and then we're gonna just meet those two in the middle now
so now I'm gonna pull up you see what the short hair is on from the
Previous guideline on the left side and we're connecting it to the right side and I'm talking about
The way you're seeing the video right now I'll see it's vice versa on how I was cutting
And then same things follow all the way back
Now that we got everything cut on both sides
We're gonna push the hair forward and we're gonna double check everything make sure everything's nice and even and I'll be it for the top
All right. So right here. I'm just putting some oil serum in his hair
All this is gonna do is give it a nice polished look to after we blow-dry it and also it's gonna protect it
From the heat from the blow-dryer, so it's gonna be a heat protective as well
And my whole objective right here when I'm blow-drying is just to get the hair up and nice
He did want you know more of just like a messy up look. Sorry. I didn't explain what kind of hairstyle he's getting
He's getting a high fade with the messy look on top just you know up with some texture in there
So I'm just getting all up right now so I can see really what hairs need to be cut shorter or if it's a good length
And you know just checking out what this is work did
So I noticed you know some parts were a little bit longer in the back and I wasn't liking it
So I just went back in and just refined everything
All right, so now I'm moving on to the fade
I'm starting off with clipper of a comb this a little bit different, but what I'm doing is just setting up the base
So I'm going in scooping out and just creating that square shape to his head
so that later on when I come back I can come back with my one guard open with my clipper and fade into
The long hair that's on top so like I said, this is a fight high fade this may look like oh my gosh
What is he doing?
But we're gonna blend into that doesn't be a super high fade
So not a super high fade, but it's gonna be a high fade where it's gonna blend right into it. All right
Just trust the process
All right next we're gonna go ahead and set our ball guile in
Always, you know the same way how we do when we come to a high fade right at the bottom of his vertical bar
We're his C cup meets the vertical bar. I was gonna take that straight back and we're in this deep ball pretty self-explanatory
All right, so now we're gonna start with our one guard open this is with the Andes magnetic guards
I do fade differently. Sometimes I want to give you guys as many different techniques
So this is one with the Andes
Magnetic guards and we're just taking off the bulk from the bottom that the clipper of the comb didn't get and slowly blend it into
The shape that we've made with the clipper over comb and you know later on
We will fix any dark spots higher on around the parietal Ridge
So now we're taking our number two guard
With the lever completely closed and we're just gonna flick out into the parietal Ridge lighting
Lighting up the area around there. So it has a smooth transition
Make sure to use corners to line up dark spots and because you don't want to create a new line
Next we're gonna go ahead take no guard on their blade completely open. We're gonna make about an inch guideline
Alright, so this would be about a width of your finger and we're gonna follow that all the way across
Following the same guideline that we made
All right. So now it's time to remove that ball the guideline
So I'm gonna leave this in normal speed so you can see it
But you're gonna have the lever completely closed now and you're gonna move up about a quarter of an inch
Alright, so if you haven't seen my other videos I explain this all the time
You have to move up on that first guideline in order to get a smooth transition from bald
To you know your fade so push it up open up the lever about halfway go up another quarter of an inch
All right, pushing that fade up
You really want to get this ball guideline out and after that we're gonna pretty much open it all the way
And we're gonna go up. Alright, so we opened it a total of four times
So you had completely closed about halfway between halfway and completely open and now we have it completely open
And we're just making sure that we're making that guideline that we did previously and that we didn't go anywhere above that
So now when we go back to blend that out, I'll have a smooth transition
now that I got that bald guideline out now go back to my shavers and pull out everything below that and
Then you have a smooth transition. Now. All you got to do is take out that last line and
Now you have to worry about you know creating too much of a baldness where it's hard to take out
If you do kind of go a little bit too high just go ahead and back with your clipper
That doesn't take it out go back with your trimmer and then you'll have a nice smooth transition
butterfingers
Right here. I'm just you know, going back over checking my work lever plane and just make sure it is nice and smooth
All right. So this is Andy's half guard or it's called the zero guard
We have the blade completely open and now we're just you know using quarter and working from the lever completely open to close
Since this is the last guideline
You want to use a lot of corners because this is fading out now. We're really fading. We're not making any guidelines
So you want to be very you know
Super diligent when you're working use a lot of corners and just pick out dark spots and just get a nice shape from light to
dark
So right here, I noticed, you know the zero guard or the half guard wasn't doing much
So I went took the clip the guard off real quick
Lay completely open and did some more corner work and you can see that it starts to fade out
So don't be afraid to you know, change guards if you need to in order to get a line out or to soften up
You know a dark spot
Like always like to go over with the scissor of comb it's a nice transition
All right, I'm moving to the good stuff the beard
I'm have my to guard right here and we're going from the bottom of his earlobe up and just clear off bulk and I'm gonna
Fade into that to guard same steps, you know blade completely open work that out
Don't be too, you know particular and really getting that perfect because once you blend everything out
You could really see what you need a detail and then you can go back between your guards
All right, so you want to go through these pretty quick just so you could see what you need a detail and what's giving you?
trouble
Back to the zero guard open to close
Right here. I'm not fully done with the blending
But I wanted to go ahead and hit that back neckline keep it as natural as possible
using my gamma hitters as always with that p3 blade on there and
This just helps me see really what I need to fade out more. I noticed the bottom of his ear
It's a little bit darker and I'm gonna have to you know, fade a little bit more
But I just like to move on let my eyes adjust
So that they don't get too focused and they'll come back later and do some detail work line up the mustache pretty self-explanatory
Now the razor work is super important. This is what makes everything pop. I am using my Turkish razor right here
This is my favorite razor by far
Just pulling up the skin with my thumb. Keep it in nice and tight
Having them blow a bubble as I go closer to his mustache
I have a flatter surface keeping the razor at a 45 degree angle and just picking each hair one at a time
It may look like I'm using the whole blade, but I am using you know
Leading more towards either the heel of the blade or the front of the blade and since I did a dry shave right here
I went
With the shave over the trimmer to take off those longer hairs just I don't irritate the skin
Like I say always go over the razor work about two three times
So you get a nice crispy line as you can see look how sharp that is looking. He's like damn that's sharp
But that's how you got to do. You got to go over two three times to make it sure it's nice and even right here
I'm just checking seeing where the where the lineup is
Landing on both sides of his cheeks just so I could get a nice symmetrical line
Same steps on this side. So I'm gonna let you guys follow along and try to
Understand what I'm gonna be doing next
So right here. I noticed there's like a little hair hanging over the line now letting get extra like sharp
So I went with my scissors kind of went over that area and yes, you can tell it fix that problem
Now we're gonna move on to the bottom neck of his line and then shaping it
So he pretty much had a guideline where he had wanted it
So I kind of followed it where I was at. I start in the middle
Put a nice guideline in there keeping it low. So he has a nice full beard and now I'm just meeting it from the bottom
of his
Jaw line on one side and following it obviously on the other side as well meeting those in the middle
Step back see what side is lopsided or what side is dipping and then correct that
Right here. I'm using a beard straightener and this is just smoothing out the beard getting all this knots out
Letting the beard lay down getting all the waves out
So when I come to shape it, I can make sure I get everything nice and even
How many guys actually want me to drop my own beard strainer?
If you do make sure to comment down below and I could be in the works for one. All right
And when you're using the beard straightener, you want to go in all different directions up sideways and down
To make sure you get the hair evenly straight and you know fully extended
Now I'm standing behind my client and he's tilted back a little bit
I'm just going over the hairs are sticking over going from you know
The top of his cheek and smoothing it straight down keeping the nice shape and then as you can see there's hairs
Hanging over the line. I created I'm gonna go over and cut those all off to give it a nice full shape to it
You guys have still been sticking around and still watching this video
I appreciate you guys if you are new make sure to subscribe to the channel. We've been growing
I appreciate you guys so much. Our channels almost at 13,000 subscribers. We're gonna be hitting 20,000 subscribers soon
So appreciate every single one of you guys
Make sure that like button and let me know what kind of hairstyles you want to see next or if there's any type of videos
You guys want me to make in particular that will help you guys more
Alright, so if you guys are gaining value make sure to smash that like button. Let me know
Now we're just gonna throw some texture powder in there
Be on the lookout. I am dropping my own personal texture powder
So make sure to be on the lookout that for that but this is just gonna add, you know
Some nice dry matte finish to the hair. Give it some volume and texture
After that like to throw in some clay in there
Just give it a more matte and a good hold to it
If you aren't following my brand go ahead and make sure to follow it. I'll have the link down below to my Instagram
I'm gonna be giving updates on their tutorials and showing you guys what products I'm gonna be dropping
Now go over that line up one more time
Make sure it's super crispy and that it's not gonna move or change
Anyway, when he goes home, this is gonna be the freshest and crispiest lineup he's ever had
And like we always do it make sure throw some aftershave on there makes them feel nice and refreshed hit him with that blow-dry
So it cools them off and that's the cut guy. So this is how my client Ronald came in before
He was needing a blessing and this is how my boy left the chair
BAM look at that line up super crispy beards on point
You got a nice high fade with a nice, you know transition from light to dark tops nice and trimmed down looking good
Hope you guys enjoyed that video. Make sure to smash the like button
Make sure to comment subscribe and I'll see you guys on the next one, right?
