How to Trim & Shape a Big BEARD - Step by Step: Barber Tutorial

jjaybeardedbarber
57 followers
5 Video Views·Aug 19, 2026
What's up YouTube Fam! Thanks for Watching!
Today we have a a full in depth tutorial on how I trim and shape a big beard. I hope you guys learned something new! Make sure to like, comment, and subscribe to the channel for more content!
All links to products are down below!
- Hair, products beard products, razors, and more can be found at - www.josephsignatureline.com use "joseph10" to save 10%
- GammaPlusNa Ergo clipper and Hitter trimmer can be found at - www.gammaplusna.com Use "jjay10" to save 10% on your order!
- P3 modified blade can be found at - www.3versince.com Use "JA-3 to save 25% on your modified blades!
What's up YouTube, welcome back to the channel. This is part two to the haircut
that you saw earlier. If you haven't seen it, make sure to hit the link above
and go and check that out. Alright, so first we're going to go ahead and start with
two guard. I'm going with the grain just to take away some of that weight on the side.
Then we're going to go and flip it over and go against the grain from below his ear up.
And then we're going to move on to the one guard from open to close, slowly removing and fading
out that line. And we're going to go on to our zero guard, open to close. And then after that,
we're going to go ahead and no guard on there from open to close. And after that, you can go
ahead and go back through your steps to double check. Make sure you have a smooth transition
from the beard to the hair. After that, we're going to go and take our gamma trimmers and we're
as natural as possible. I usually go from the very top to see where it's the fullest and I'll
bring that all the way down and then take away the bulk, move the beard out of the way. If it's
a bigger beard like this, just make sure I have it nice and lined up. And now we're going to move
on to the next side, doing the same thing, going from the bottom of his ear with a two guard,
going up and then moving on to the one guard and then the zero guard and then no guard on there as
well. If you guys are curious, this is the Andes double magnetic guards. So they have a zero guard,
a one guard and a two guard. You see here, I went back to my two guards to do a little bit of detail
because the transition wasn't smooth. So go through your steps and then come back and follow
them up again, just to make sure you have a smooth transition. Make sure you use your comb or brushes
to move the hairs out of the way as you need. Now for the mustache, the mustache was already
pretty short, so I just went over, did a little clip over comb with the wide side of the comb
and then we're going to keep the mustache pretty natural, just lining up the lip area just to clean
off so it's out of his way. This side is not a really good angle, but we just flipped over our
trimmers and lined up the top of his mustache because that's what he previously said before
he wanted to go ahead and clean up again, keeping it as natural as possible. It was a little bit
pushed down this time because of, you know, he sometimes grooms himself at home, so
we just went ahead and went with the same line that he had. Now we're going to go and line up
the beard, use your opposite thumb to stretch it out nice and tight, keep the blade at a 45 degree
angle and just make a nice natural line going, you know, where it's fullest towards his mustache.
We are going to go ahead and enhance it after just to get it nice and crispy.
Make sure to go over the beard multiple times so you get a nice crispy line before you enhance
it so when he goes home and washes it off, it'll still look nice and crispy.
So when it comes to enhancing, you want to make sure the line is lighter than below. A lot of
people make the top line really dark and then there's patches that are lighter below it so it
looks like it's sharpied in, so you want to make sure, you know, the lower around where, you know,
his sole patch area is down there, that's darker and then gets lighter as it gets to the top of
the beard so it has a nice transition and it fades it nicely. I'm doing the same thing to
the other side, so as you can tell right here, stretching with my opposite hand and I'm leading
with the bottom of the blade, making sure I'm getting a nice sharp line. Trying my best not
to push down his beard, it's always better to go as high as possible and then wipe off the line
and then reline to see where you could go next. Right here I'm just, you know, looking at him
face forward to see where the line is ending on the other side so that could connect it to this
side. That's the best way to get a symmetrical, have one side, boom, done. Usually the, typically
the side that's lower because the side that's higher you could always bring low, down lower
to match the lower side. Right here I'm moving the hair out of the way so I can make sure
get under the hair because that dye does actually stain the skin, it's the 245.
Sprayed a little bit of water into his beard because he has a super thick beard and it was
probably all tied up because of the mask. So I sprayed a little bit of water in there just so
it's easier to run the comb through there. I'm just trying to get the hair out of position,
try to change it up, get it back to its natural state. So I'm going ahead, you know, combing
through up and down then we're going to go ahead and blow dry. So right here we're going to go
ahead and blow dry his beard. So I start on one side, brush it all to the opposite side
to really, you know, move the hair, get it out of its, you know, messed up state. We want to get it
back to as straight as possible. Now once we go to one side, we're going to go back to the other
side. Do the same thing, just combing it through all to one side and after that we're going to go
ahead and flip it over and then we're going to go up. So now we're going up, really getting that hair
as straight as possible. If you have a beard strainer, you could use a beard strainer but
I left it at the shop so I have to use a blow dryer.
Once we blow dry it completely up, we're going to go ahead and just blow dry it down
back to, you know, how it would originally look when it's styled and completely done.
So right here we're blowing, blow drying it down, kind of curling it, you know, make sure
the chin area is straight so when I go to shape it, I can really shape it exactly how I need it.
As you can tell when I'm blow drying it down, I'm not pushing into his beard,
I'm going off of his face so it keeps it nice and straight and I'm not tucking the beard in.
So you're combing, comb off of your face whether it's your own beard or
your client's beard. Now we're going to go shape it up and what I'm doing here, I'm stepping behind
him and I'm just cleaning off all those long hairs that are sticking out. So when you're
actually doing it, you could obviously see the long hairs so you just want to go behind them
and just flatten it off their face depending on what shape they want. He just wants it nice and
tight so he doesn't want it flaring out so I'm going from, you know, where we did with that two
with the grain from there all the way down getting all those hairs that are sticking up and as you
can see the face is starting to create structure. Doing the same thing on the back. I wish I kind
of took the camera so you can see but just doing that all across make sure I'm getting all those
flyaway hairs. From the front we're only going to take, you know, enough to get rid of those
thinner areas that have grown out, kind of the split ends. So we're just going through the front
taking enough to take away the split ends and then we're going to start connecting it to the
side that we've been working on. And once we kind of got the shape in place, we're going to go over
to the next side, even that up and then after that we'll step, take a step back and look at
what we need to cut more off or what needs to be taken off in order to make it look as tight
and as symmetrical as possible but still keeping the length. So this side, since it's my dominant
hand, I don't really have to go behind him so I kind of stand to the side of him and I let the
blade be flush on his beard from the top where we did the two with the grain and then just bring
that all the way down. Right here I'm just free handing it with one hand. If you don't have as
steady of a hand and you're a little bit nervous, go ahead and take your opposite hand and hold
your dominant hand so that you have more control. If you're too afraid to just free hand it. So
right here we're connecting that from his, what you're looking at from that left side to the right
side. See right here I'm using two hands just to be more secure so you can do the same thing when
you're free handing. Right here I switched over to my left hand. It's good sometimes to switch
hands and use your left hand just to get more comfortable with it because you never know,
sometimes it's easier to just switch to your left hand because it's just awkward using your dominant
hand whether you're a lefty or a righty. As you can tell the beard is starting to come together,
it's becoming more compact. Right here I'm pacing towards the mirror and I was looking at what was
hanging off and I noticed there was a little bit more bulkiness on that side so I went back over
it. When it comes to shaping beards you just got to be slow with it, very patient, take a little
hair at a time, let them check like is that good, do you want me to take more off or does that look
good to you and then you're good to go. So right here I'm looking at it, you can tell that left
side needs a little bit more taken off so I'm going to go back through it, match it to the right side
and he keeps the bottom of his neck pretty much all natural. I just take off the little hairs
so I don't go in there and bring it up, line it up with a trimmer. I just kind of take off those
little hairs and then that's good. Now you go back over, always go back over with your scissors
just to refine the shape, get those flyaways that you can't really get. That's pretty much going to
do with shaping the beard, super simple, you just got to connect the dots. So like we started,
blended the beard in, after we blended the beard in we went ahead and lined it up, got it all nice
and tight, enhanced it if we need to and then we started shaping the outside of the beard,
then we went to under the beard and then connected the outside to the under the beard to get that
shape and then that's about it. Now you can tell the beard is all together. This is how it looked
before, beard all out of whack, curly, not even straight, dipping, those masks man they kill you
and this is how my boy looked after, oh yeah. Make sure you go ahead and check out the haircut
video, make sure to subscribe, like, I got more content coming for you guys. I'll see you guys on
the next one.
