SlickBack Burst Fade Hawk - Barber Tutorial

jjaybeardedbarber
57 followers
1 Video View·Aug 19, 2026
Follow my brand:
www.josephsignatureline.com
IG: @josephsignatureline - https://www.instagram.com/josephsignatureline/
Beard Shading Pencils & Turkish Straight Razor can be purchased at www.josephsignatureline.com use "joseph10" to get 10% off your order!
Thank you everyone for Watching! I hope you guys enjoy the tutorial and learned something new! Make sure to smash the like button, share the video, subscribe to the channel, and comment down below!
Links for Everything will be down below!
Follow me on Instagram @jjay_beardedbarber
Beat by IG: @restlessmindbeats
Gamma and Style craft Clippers and Trimmers can be purchased at www.gammaplusna.com use "jjay10' to get 10% off your entire order!
What's up YouTube fam, welcome back to the channel.
This is going to be another tutorial on a slicked back with a burst hawk on the side
and a tail on the back, alright?
This is just the haircut, if you do want me to see how I shape the beard up,
make sure to like for part 2, but let's get into it.
So first you always want to comb the hair in the direction that it's going to be styled in.
So I'm just combing it back, getting everything laid down.
I pulled out my number 2 guard and I'm making my first guideline.
This is just clearing off bulk so I can really set the foundation of the fade
and kind of see where I'm going with, you know.
This is going to allow me to be able to clip over comb into the longer hair on top.
Also it's going to make it a lot easier for me to fade into a number 2
instead of just random long hair on top that I don't know what it is.
So next we're going to get our bald guideline and we're keeping the c-cups.
We're starting it a little low so about, you know,
fingers width above his ear and then we dropped it in the back
where he would have been lining up his neck if we were doing a taper.
You'll see a better view on the other side.
And while we're here with the trimmers in our hand,
I'm just going to go ahead and edge up his c-cup real quick
just so I could determine how dark I'm going to keep that while fading.
And then we're going to go and move on to the back and kind of just clean up the back area.
And as you can see, I'm bringing it into where I made my bald guideline in.
So then we're going to slowly fade to the back so you'll still have that back line
but it's going to have a nice transition into that.
And then go ahead and bald them out.
I am using my Gamma or these are actually Stylecraft's shavers.
Okay, next we have our 1 guard completely open
and I'm moving up right below where I left off with that 2 guard
just so now I'm going to be blending from bald
to a 1.5 guard.
So that's pretty much all I'm going to need to use is no guard, blade open to close
and then my 0 guard, blade open to close
and then I'll be pretty much done with the blend.
After that, we just detail.
And I am using the Andy system.
So these are the double magnetic guards.
These aren't single magnetic.
They are double magnetic.
So if you do want to try them, I think these are the best guards out on the market
is the double magnetic guards.
These are my favorite.
The single magnetic guards are good as well
but I just love the double ones better.
I don't know what it is, but they're just a little bit better.
And I noticed that I didn't go high enough with my 2 guard
so I just went back with the 2 guard just to clean up a little bit more bulk.
Now we have no guard on there
and we're making about, you know, a half an inch guideline
following that same shape we did with our bald guideline.
Now we have that 0 guard all the way open
and we're just going to start to flick out and line up that area.
Okay, we're just going to flick up, you know,
keeping it relatively in the same area that we left with our 1 guard.
It may look like I'm in the same area, which I am.
It's just I'm not pushing in.
I'm letting the blade sit on their head
and I'm using corner because this part is the fading part.
So you want to use corners.
You don't want to use the full blade
and I'm slowly closing the lever as I start to fade down
and get closer to that guideline that we made with the half guard open
or sorry, no guard open.
Just to make my life easier.
I'm kind of pinging, pinging,
pinning up the long hairs separate from the side
so I can come in here and clip over comb
and keeping that front length longer
so we have enough length to slick it back.
And like I said, this clip over comb is going to blend in
right into that 2 guard slash one and a half guard that we did earlier.
And then now after this is just going to be detailing
and removing that bald guideline.
So now when it comes to removing that bald guideline,
also you already have the blade completely open.
So I do start with it completely open just to, you know,
test the areas and, you know,
fade in the areas that didn't blend from the zero guard
to the blade completely open.
And after that, all you have to do is have it completely closed
and then halfway open.
And then after that, just detail any dark spots
and then the line will be completely gone.
So you want to go completely closed,
knock out that bottom line,
open it up halfway,
use the corners detail a little bit more
and then open up all the way
just in case if you created another line
or pushed up a little bit more,
but then you'll have a nice transition from bald
all the way into that long hair.
After that, go ahead and use your scissor over comb
just to get a nice flawless transition
from the number two guard,
the clip over comb and then into that long hair.
It just softens everything up and it has a better transition.
And these are thinning shears.
All this is really doing is taking away some of the darkness
or any bulkiness that you see.
All right, so onto the other side, same steps,
you know, comb everything through,
get everything laying down how you need to.
Use the number two guard to clear off bulk.
Go ahead and put your bald guideline in,
follow it up with the one guard completely open
right under the two guard
and then have no guard on there,
lever all the way open,
set that guideline about a half inch to an inch long
and then pull out your half or your zero guard, sorry,
and work from all the way open to close to remove that line
and then take out the bottom bald guideline.
Hope you guys could follow through.
If you guys have any questions,
make sure to drop them down below.
Also, just a little tip while you guys are watching this video.
The difference between the one guard and the zero guard,
because you guys can't really tell obviously
because they're both purple,
is the zero guard, as you can tell,
is missing a tooth on the very right side.
So that's how you know I'm using the zero guard.
The one guard is completely normal
and then the number two guard is obviously a lot longer
so you can tell that's a bigger guard.
All right, moving on to the lineup.
There's not too much with his lineup
because he doesn't have too much overhang
but as you can see where, you know,
the hair disconnects from the longer hair,
combing those all down
and his right side is lower than his left side.
His left side goes higher.
The way we're looking at it.
So I went to his higher side first
and tried keeping it as natural as possible.
Just cutting up hair to get a sharp line
but not pushing him back or anything like that.
And then did a little clip over comb
just to take away some bulkiness
and then go back over it.
And as you can see, super natural
but getting a nice sharp line.
Same thing with the vertical bars.
Not trying to push him back or anything
to get a super sharp line.
Just keeping it as natural as possible
but still sharp.
Razor will make a huge difference
and then we're also gonna throw a little bit
in enhancement in there after
just to take it to that next level.
And then what you wanna do is after this,
I'm just going over a couple of times
just to make sure it's nice and sharp
and no hairs are moving
but follow that same path
that you did on the left side to the right side.
All right, now we're just gonna apply some enhancement.
I am using my 245 XL compressor
with their dye as well.
I honestly feel like their dye
is the most natural looking
and the easiest to come out.
I like their dye a lot
so I've been using their dye.
There's other dyes out there
but this one just comes out so natural
and it just looks the best.
All right, now we're moving on to the scissor work.
We're just gonna saturate the hair.
We're not taking too much off.
I believe we just want a little trim
about an inch off.
Leaving the front obviously longer
guiding it short as we go to the back.
So I'm gonna walk you guys through this.
Go and take your first guideline
about where the head bends.
I've done this in other videos.
I put the comb on their head
and where it bends is where I take the section
and now we're gonna connect that long hair
into the mohawk or the faux hawk and the side.
So I'm taking sections pulling it sideways
and connecting it to the clipper of a comb
so that has a nice flow to it
and it's not too much overhang.
So no matter where his hair goes
it's gonna lay perfectly.
And make sure to pay attention
to how I'm pulling out on some places
and angles I'm pulling out
and where I'm, you know,
as I go towards the front of his head
and that hair is getting longer
I pull more out.
I'm not taking that same line straight across
because then the hair's gonna be too short.
All right and then towards the back
I go a little bit tighter
so that it's more tight to the tail.
All right now making a section
on the top of the head
because now we're gonna go ahead
and take the length off.
I usually use about their eyebrows width
as a reference point.
Sorry my English sucks today
and I pull it up
and then we're taking about
a half inch to an inch off.
I'm leaving the front longer.
The front wasn't too long
or I think he just said
he wanted to take enough
to take the blonde off.
And that's might of what it was.
But anyway so I just, you know,
pull up nice and tight
and then follow that same guideline
all the way to the back
and then we're gonna do the same thing.
Come all to one side
and then connect that middle guideline
to the side.
We got the hair all blow dried back
and pretty much how it's gonna be styled.
I'm just gonna go and clean it up.
Clip over comb whatever excess hair
that I didn't get with a scissor over comb
and then boom.
Look at that.
Shape is definitely there.
As you can tell it's nice and squared.
You got the flow coming back.
You got the little tail on the side,
I mean in the back
and then the fade is definitely popping.
Now all we gotta do
is throw some product in there
and then that's gonna be the finished result.
All right so next I'm just gonna go ahead
and take a little bit,
you know, some random sections
and I'm using my chunker shears
just to take away weight.
These ones actually take away 50%.
So I'm using these
just to create some texture in his hair.
Next we're gonna go ahead
and apply some clay to his hair.
This is actually my own product
that I came out with.
I will be releasing it
first week of December
around, you know,
between the 6th to the 13th.
I haven't had the launch date official
but I will be announcing it.
I love it.
Has great hold to it.
It's like I have it on the box.
It has a five hold on it
with about a one shine.
It's not completely matte
but, you know, it's very low in shine.
Has a great smell to it
and I'm excited for you guys to try it out.
You guys are gonna love it.
But now we're gonna go
and throw the fishtail comb through there,
style it up,
get a, you know,
add that texture in there a little bit.
As you can see,
there's a little bit of separation
throughout the hair
and then that's pretty much gonna be
the final product.
I put some beard balm in his beard.
If you guys do want to see the beard
like I said,
go ahead and make sure to like the video
and I'll drop the beard separately
on how I sculpted his beard
and got it looking good.
So this is how my client came in before
and this is the after.
As you guys can tell,
I'm letting him see it.
He's checking out.
He's liking it.
But that's the finished cut, YouTube.
Hope you guys enjoyed that.
Hope you guys learned something new
from this video.
Make sure to comment down below.
Make sure to like up the video
if you do want to see part two
and I'll catch you guys on the next one, right?
I'm out.
Bye.
