Thank you guys for watching this tutorial on how to do a mid fade with beard work! Hope you guys found it helpful! Let me know down below what guard system you guys use? Make sure to like and subscribe to the channel it really helps with the algorithm. Comment any thoughts or questions down below! ⬇️⬇️⬇️
Follow me and my brand on Instagram @jjay_beardedbarber & @josephsignatureline
Hair, beard, and tools from www.josephsignatureline.com Use "Joseph10" for 10% off your entire order & FREE Shipping!
Clippers and Trimmers from www.gammaplusna.com Use "jjay10" for 10% off your entire order!
Modified blades from www.3eversince.com Use "Ja-3" to get 25% off your modified blales!
What's up youtube fam, welcome back to the channel
There's gonna be a mid bald fade tutorial with some beard work
Also i'm gonna be going over my opinion
On the wall system guards compared to the single magnetic guards that come with the ergo
All right, so make sure to subscribe and stay tuned for the rest of the video
All right guys, so like usual we're gonna start off pinning the hair on top from the sides just so you know
We have a clean canvas. Um, I am a little disappointed with how I was
Sectioning this area. I wish I got the hair a little bit wet and then was a little bit clean with my sections
but this was one of my first videos I recorded for youtube and I think I was just
Trying to rush and because I was recording. I don't know why but just make sure to take your time with this pin everything up
But we're not this isn't going to be a full. Um
Disconnected work. I mean disconnected style. It's still going to be blended into the side. So that's why I think it wasn't too
um picky with the sectioning if it was like an undercut you make you want to make sure that
That line is perfectly. Um
Straight, you know going with where it should be
you don't want to have it all choppy because you'll definitely tell when you're doing the
Disconnected look but this is we're gonna blend the top to the side. So I wasn't too worried about it being too clean
Just make sure, you know, everything's good from the back and the sides and then we'll go ahead and start the fade work
So we took our one and a half guard completely closed and this is the wall system
At first I didn't wasn't gonna do the two different card systems, but later throughout the video I was like, you know
Once I'm gonna do with the wall system
Once I'm gonna do with the single magnetic cards actually come with the ergos. All right, so we have the one and a half guard
And completely closed and we're just creating our base right now so that we know we're gonna fade from bald
To the one and a half guard and we're going up enough
To where we still have enough room where we clip over comb
And it's not going too short, but it's still enough room where we could fade into it
after that
We're gonna go ahead and clip over comb because with this particular comb it's gonna blend in right into that one and a half guard
So we're gonna have it flush on this head scooping out a little bit and combing
Fading into that long hair. There's gonna be different angles where you can see how i'm resting the comb on his head
So I keep it flat on his head, but then I kind of scoop out
And towards the very top of the comb you see like the longer hairs that i'm barely cutting
But more towards the bottom of the comb i'm cutting all that long hair
And that's what's going to blend from the one and a half guard to that long hair
And you're still going to create that square shape
That is the desired look that we're trying to achieve here
I'm going to try finding this comb on amazon. I'll link it down below if you do want to purchase it
Just go and click on the amazon link and i'll take you to
uh
The link to obviously purchase this comb
But notice how i'm resting the comb on his head
I wish I can adjust the camera here
But see how I scoop in and I pull out and then i'm just fading into that longer hair
From that guard makes it super easy at first, you know, it's a little bit scary
But trust me as you work on it, you'll get better right here. I went grab my one and a half guard
There's a little dark spot. So I opened and closed it till I kind of faded that out
And that's pretty much it. Now. We're gonna fade into that one and a half guard. So we've got our trimmers
This is my gamma trimmer like I always use
With a p3 blade on there. I always say this
and we're just going from the bottom of
His vertical bar and just bring that straight back at a slight
Decline as we go towards the back of his head because we want that illusion
And how it fits to his head if we go straight back
It won't fit his head shape because his head shape drops in the back
And also it gives you extra room to fade so the fade isn't so condensed in the back
Now we're just going to go ahead and bold everything out pretty simple
Okay now so you see my finger width that's about how wide our guide is going to be so it's about an inch
We got no guard on there. They're completely open and we're making about an inch guideline all the way throughout his head
We're going to be doing the same way
We have it completely closed with no guard on there and we're attacked that first line
And notice towards the closer towards his eye how light the line is a lot lighter
And as you go towards the back of his head, it gets darker
It's because the back of his head is more dense. Typically most people the back of the head is more dense
So you don't have to push that front line too high
Because you know if you open up the clipper how we have right now
Look as you can tell the front is completely blended, but the back needs a little bit more work. So now we're completely open
We're attacking that ceiling of the guideline that we created and then we're going to go and close down the clipper a little bit more
Continuing until that line is completely removed. So first we start completely closed
halfway
all the way open
Back down a notch down another notch until we go back all the way closed and that line will be completely removed
All right, after we remove this i'm going to go ahead and be using the wall guard systems to blend out
But typically the difference between the two is the wall guard systems have a little bit extra guards so you can get a little bit more
precise with your detailing because there's you know, a half guard a one guard one and a half guard and then a two guard
And also you could open the lever up and down to get it a little bit longer. So
And then the single magnetic guards all you have is the zero guard which is pretty much the half guard
The one guard and then the two guard so there's no one and a half guard
Other system just goes from zero one to two, which I like because it's one less step
but
When it comes to the wall system, you could get um, it's a little bit more
beginner friendly, so if you're a beginner and you want to
Get your fades down you can maybe go that path if you're a little bit more experienced
You could go ahead and jump to the single magnetic guards
But both systems are great. Um just depends what you're most comfortable with
and what you practice with so, um
I start off with the wall system
Which I really like but I kind of switched over to the single magnetic guards because I like just having one less guard to fade
You know, you could go ahead and do the one open
All the way around clip over comb into that
And after that, all you have to do is blend from the no guard and the zero guard and you're pretty much done
So it helps definitely speed up your process
um wall system, you know, you got to go through more steps until you get more advanced where you can skip some guards, but
So right here we have the one guard completely open
And we're going to be fading into that one and a half guard. We did earlier
I closed it halfway there and still you know going up as you can tell i'm not digging in
I'm keeping the clipper flat on his head and i'm scooping out into those long hairs
So i'm really picking the hair especially with these ergos. The blade is super fine. So it's really easy to um
Point cut and really blend in or pick out each of those dark spots
So as you see in the front
It's a lot lighter and as we go towards the back you can see those dark spots
Within his head where the clip over comb and the one half guard is
So we're really in there and we're really just kind of skidding the clipper off and really picking each one of those hairs
So we're not digging in we're keeping the blade flesh
And we're leaning towards the corners now. We moved on to the half guard
And we're going to do the same thing go all the way open halfway then close
But it looks like i'm using the whole blade see this way i'm leaning more towards the left side
As I go towards the right i'm leaning more towards the right side
And we're just picking out those hairs getting lighter and as you can see it's the fades all coming together now
And it was just those simple steps
Clip over comb is really important because it helps cut out
You know the two guard the three guard the four guard all those
Because you can go straight from a one and a half guard all the way to long hair
So I definitely recommend you guys working on your clip over comb figure it out
You know, if you have a client you're more comfortable with try it, you know test it out on him
See, you know, okay go put the comb in there cut it see what gets cut and like, okay now
I kind of understand it and then use that towards your technique to help get better and better with clipper or comb
And more confident with it
So i'm gonna go halfway through the back of the head
So right here we're gonna finish with the wall system and the other side you're gonna see we're gonna go to the
the single magnetic guards
Let's see
This is what I mean when you drop in the back
Imagine if I went straight across on the back the back of the fade
I would not have enough room to fade and it would have looked very condensed and you would have seen a harsh line
So the reason so since I dropped it it gave me more room in the back to extend that blend
So I feel a little bit more comfortable just in case if something ever happens
Um, I have a little bit extra room
I could have even probably dropped it more in the back if you're you know scared or worried drop even more in the back
But now we're moving on to the single magnetic guards. So this is the one guard open
So same thing like the wall. They're very similar
Just like I said that one guard is different and it's what you feel comfortable with the teeth on them are definitely different
I feel like these ones kind of blend a little bit more softer compared to the
the wall ones and they're
Magnetic as well. So they you know clamp on there and you know, they're not gonna fall off and remember before the
I don't know if you guys know but the white one and a half guards those used to fall off all the time
I'd be cutting someone's hair and it would just I would feel it about to fall
So I would just pull away and it would fall or I would have to hold my finger on there to make sure
Like it's not gonna fall off. So the magnetics definitely clamp them on there, which I like
Now I just went ahead and closed it all the way
And same thing digging, you know
Not digging in there really using the corners and letting the clipper slide off of his head and blend into that long hair
Okay, you want to keep that square shape think about it
See how you see how his head looks square and it's like flat flush with his head
That's what you want. You want to come off that same shape?
So now we have the zero guard which they look pretty similar, but the teeth are a little bit smaller
So that's how you know, it's the zero guard
And obviously it has a zero guard on there
But now we're doing the same thing completely open and like I said usually with this half guard with a zero guard I like to go
completely open
First once it's not cutting anymore
I go halfway and I go all the way closed and after that i'll just you know move the lever as I need
To you know remove that line and then you'll see after this the line is completely removed
So i'm gonna go ahead and close i'm gonna take off the guard and use the clipper all the way open and detail
I do like the way these this guard system fades. I feel like it just like I said fades a lot more smoother
And it really like picks the hair
Um, if you really go and use it and test it on different clients, you'll kind of notice the difference
um
So I highly recommend the single magnetic guards. They do come with the ergos but also now
Um, which I could do on another video. I could record another fade is the double magnetic guards
And those are my by far the favorite so gamma now came out their own double magnetic guards, so those are what I
Highly recommend the most but just for this video purpose is we're going over the wall system and the single magnetic guards
And right here i'm just detailing with no guard and as you can see right there where i'm working right now
They had dips so that's why I had to go do a little bit extra work there
But now we're going to go and move on to the hairline pin his arrow up
As you can see he's got a calic right there. So I like to knock it down short
With the one and a half guard I went with the grain and i'll go against the grain
and this just debulks the hairline so that it's
A lot shorter and I could get a nice crispy line on there
Compared to having long hair then you're gonna end up pushing them back because the long hair keeps pushing and
It's not gonna come out nice. So it's always nice to debulk at first
And right here as you can see those long hairs in the back were sticking out
So I went back with my clipper over comb
And got it because as I pinned the hair up I could see what hairs was sticking out and really get that square shape
So I just did that right now real quick while I was here
so now, you know, I
Tilt this head down a little bit so it's directly in front of me and i'm going to start in the middle
I'm gonna go towards his
My left just to get that calic out of the way and and also that hot side is a lot higher
So I didn't want to push that side any higher. So I went there first
Just to make sure that one's you know, not pushed back at all
I keep as natural as possible and then i'll go to the right side and match it with the left side
Now that we got the left side done
I started a little bit on that left side and i'm going to bring that all the way across to the right side
Try keeping it as symmetrical as possible
So the reason why I start a little bit on the left side is so I can continue that straight line
Over to the right side and this first path is, you know, rough draft just cut, you know the excess hair
Now, this is a technique I learned from vick blends you pull your comb down
Grab the teeth and then come to the other side and you know
Make sure you're taking it from the same area from the vertical bar
And then put that there and that's how high you're going to go
So, you know how how much higher you have to go to get the same corner as the left side
And you know, it's a little it's a process, you know, go a little little out a little out of time
You know pick some hairs step back look at it. Does it look good?
No, I got to go a little bit higher come back and keep touching that until you get the
Get as symmetrical as you can but as natural as possible and not pushing him back
Now that we have all done i'm going to go ahead and bald him out
and then later on, you know
After this i'll detail to what I need to have a nice transition from the bald
All the way to the long hair, but as you can see that fade is popping right there. Look at that
All right now i'm moving to the
Probably most of you guys want to see is the beard
So I believe I threw on a three guard or a four guard guard on here. I believe it's a three guard
And you know pretty simple we're just gonna take it all down to a three guard he wanted it all even and short
He's got a dope beard. I wish he would grow it longer, but he likes it short. So we cut it down to a three
Now when it comes to playing the sideburns same steps, you know, we put the bald guy line in there
So you can see where it's bald
Clipper all the way open and then halfway and all the way closed and then just move the lever until it's fully blended
And after that, um, i'm using the single magnetic guard system to blend this out. So got the one guard completely open
And just you know made another guideline closed it
Blended that out a little bit obviously it's not gonna go away old way
We're just lightening it up as you can see it's getting lighter and then we're going to move on to the zero guard
Completely open to close and then that's it
And then I kind of finessed it so I got to blend all the way out
But then you could go ahead and grab the two guard and then blend the two guard into the three
And then as you can tell the beard is completely blended looks nice
I'm gonna line up the back of his neck keep as natural as possible
Going, you know with the structure of his jaw
But what you do to one side you're gonna do to the other side
So the other side i'm not going to show the fade technique because it's very simple and the same thing
Line up his mustache very naturally just cutting those hairs that hang over his lip
And then we're gonna hit the top line very lightly just to get a nice line
But a lot of people ask me, you know how to fade the beard in it's very simple
just make the ball guideline, you know about where his earlobe is if they want to kind of more of like a
Beard fade just drop that ball line lower and then the same steps
That we do with the fade technique is the same with the beard
And then now, you know, like you see we're doing the straight razor and i've done plenty of videos on the straight razor
You know, just stretch it tight with your left thumb and then razor from the top of his
Beard going down towards where his mustache he wanted to connect to his mouthpiece. So that's why I brought it a lot lower
And keeping that blade 40 degree angle and just creating a nice line create that first path where you want it to end
and then
Brush it off. So you see what hairs didn't get cut and then come back and get it nice and sharp
This side i'm just detailing a little bit
Just to show you guys very simple to blend that in and then i'll just line up the back of the neck same way
All right here for the bottom of the neck same thing as when we're doing his lineup on his forehead
Same thing goes the bottom of his beard. I start in the middle get that nice line
As you can tell his beard is where he had it was already pretty good
But we start in the middle went to the left side right below his jawline not right on his jawline
But about a finger's width below his jawline
And then same thing connected from that middle to the left and then from the middle to the right
You kind of want to go higher on the jaw a little bit higher on the jaw and more lower as you get towards the middle
That will really outline their jawline and give them structure to the face and then just pull them out
Make sure be nice and soft stretch the skin
And be very gentle because this area is very soft and um, I could get irritated really easily
And then just ball them out
Make sure always stretch the skin move the skin if it's starting to roll just so you get a nice clean shape
Even though we did a three guard you always have to come back and kind of free hand
Into that beard line that you created below because there's hairs that are still stragglers that are hanging over
And that's what really makes the outline of the beard
So as you can tell I got those little hairs and it makes a world of a difference because it makes the beard
Actually look more snug and tight to your jaw
Now moving to the top we're going to go ahead and saturate his hair with water
We're going to go ahead and just trim the top
A little bit. I think you want to cut about an inch or so off. So it's going to be
uh
A nice nice trim, but nothing too crazy. Mainly the back of his hair was really long
So the front hair was actually at a good length. We're mainly going to be tightening up the back area
and doing some
uh
Scissor work techniques that I could show you guys
So right here I just took the front pulled the hair up and I just wanted I just did this just to show him
Um, how much did you want me to cut?
You know because clients will say inch but they don't really know what an inch is not saying like they're dumb
But like they'll say an inch and they'll cut an inch and be like, oh, can you cut more or can you?
I wish you cut less so I showed him
Is this how much you want me to cut?
He said yeah, and now i'm creating my section which I went from the middle of his eyebrows
And that's about the width of his section that I took
And i'm gonna pull this hair up and as you can see what the short hair is boom from the back
I'm gonna cut all that off
So that was about the length about a whole inch is what I cut
And then i'm gonna follow that all the way to the front of his head
And as I get closer to the front you're gonna notice i'm becoming
Less hair because we want the front to be a little bit longer as I came to the middle
We kind of go a little bit more straight. So it's kind of like a triangular shape if you tell from the back
It goes up
So it kind of makes a triangular shape
I've shown this in previous videos
Um of that triangular shape i'm showing but then we kind of push there all to one side and now we're going to take
Sections. So first we took vertical sections. It's going straight across his head
Now we're taking horizontal sections
And as you can tell i'm taking that section pulling up and you'll see what the long hair is what the short hair is
We're going to change angles right here. So you'll see from the front view
As I pull up
You can see that short hair
Towards the right and the long hair to his left and you just chop that off and you keep doing that
So you get all the way to the front of his front of the head
Now once you go through everything i'm just going to keep pulling that hair back and just making sure that's all even
And as we get to the back I go a little bit lower. So this goes from long to short
Now I take this little section from that
Uh left side or my right side, but left side from what you're looking at. I take a section of that
Push all the way to the other side and then we do the same thing
Take horizontal sections and see where that short hair is cut it to the long hair
Now after that I go and grab it from the middle pull up and then i'll cut
What you know what hairs I typically miss
Make sure it's all even and then I just go throughout the whole head go back to vertical sections cross check
Make sure everything's even
And once that's all done
That's pretty much it. Very simple. Once you break it down
Now I just took some oil serum i'm gonna put in his hair. It's gonna help
Uh protect it from the heat damage
It's also going to give him a nice shine after we blow dry it
And make sure his health is his hair has the natural oils in his hair or have the oils in his hair
That will help protect it and give him volume
I'm gonna blow dry it first. I just kind of grab my hands
Because he's gonna have like a messy front look so
Just blow dried with my hands
Until I got to a little bit past damp very, you know, not completely dry, but it's you know, starting to form shape
After that we're going to go ahead and grab the comb
Or a brush and just start blow drying it up and get it completely dry and into the desired look that he wanted
Now we're just added a little bit enhancement just to take that haircut to the next level
And really, you know make the haircut pop
And make that fade pop and make those lines look even more sharper than they are. So we went in just enhanced it
Went ahead put some product in his hair. I believe this was like a clay or a cream
And this is just gonna give him like a nice shine nothing too crazy and give him a nice hold
Now after all that just make sure to hit your client with some aftershave
Just to make sure his skin is nice and clean since we went down to uh skin with a shaver
And that's pretty much gonna be it. We get hit his neckline to everything disinfect everything. And so this is how my client came in before
Looking rough, you know was in need of a haircut
And this is how my client left. Bam. Look at him back to life
That fresh fade with a drop in the back looks really nice suits his head got some texture on top beers on point
Haircuts on point
My man's ready for a model shoot or something
But I hope you guys enjoyed that video. Make sure to subscribe like comment down below really appreciate the support
Road to 50k, but thank you guys so much. I'll see you guys on the next one