How to Adjust Draw Weight on Your Bow | Archery Basics Explained

The Ancient Longbow Legacy
8 followers
4 Video Views·Aug 20, 2026
Learn how to safely and effectively adjust the draw weight on your recurve bow in this video. Whether you're a beginner or an experienced archer, understanding how to change the draw weight is essential for becoming an archer. In this video, I provide a step-by-step guide, demonstrating the proper techniques and precautions to avoid damaging the bow or compromising its performance.
AI Generated·May contain errors
Video Summary
AI GeneratedThis guide explains how to safely and correctly adjust the draw weight of a bow using tiller bolts. It emphasizes the importance of unstringing the bow to prevent permanent damage to the riser and highlights the mechanical process of using Allen wrenches to increase or decrease tension.
Changing your draw weight on your bow is very simple and straightforward, however, there's
a few things you have to pay attention to, otherwise you may damage it, and if you do
these things correctly, your bow can last a lifetime.
Welcome to Archery Basics Explained, where I break down the fundamentals of archery into
easy-to-follow, bite-sized video formats.
Today we're talking about draw weight, and how to change it properly.
Quickly, if you're new here, if you wouldn't mind, do subscribe and hit that notification
bell down below.
Consider supporting this channel, I produce all this content for free for archers around
the world to enjoy, and I can't thank those who support this channel enough.
So, draw weight.
It's very simple and easy to change, especially on a bow just like this, where it has adjustable
tiller bolts, or limb bolts, depending on what you want to call them.
These are the pieces right here, that the limb sits against when it is at full draw.
They have an allen wrench, that usually will go inside the front like this, and then there
is also a lock in the back side, back here.
You must loosen the lock first in order to make adjustments on the tiller bolt itself.
Depending on the style of lock, you may need to back the bolt off several turns on the
back side in order for the bolt to move on the front side correctly.
However, you have to be careful, because some bows absolutely must be unstrung when changing
your draw weight.
In fact, it's a very good idea to just get in the habit of unstringing your bow to make
major changes in draw weight, because what can happen is the threads of the tiller bolt
can damage the riser, that's this piece here, and then you're going to have a problem, because
you may have completely junked your riser if you don't unstring it when you change the
draw weight.
I've seen it happen, and especially if you're going to use the same bow for several years,
as you make lots of different adjustments, those threads just start to mar and jam, and
eventually just lock themselves into the bow, no longer rendering the bow useful, because
you can't make any adjustments.
So, the first thing I will do is unstring my bow so I can safely make these adjustments.
The tools you need are just some allen wrenches, either the ones that came with the bow itself,
or a set of allen keys.
If you don't have a set of these, I'll have a link in the description below, in case you're
interested in those.
You essentially put one in the back side, and then you go to loosen it, and you can
loosen it, I don't know, anywhere from a half a turn to several turns, depending on the
limb bolt style, of course.
And sometimes, just like this, when I'm going to loosen here, it's turning the limb bolt
and the front.
So, you may need two allen wrenches, one to hold the bolt itself, and one to lock break
the lock free, and in my case, that's what I need to do.
The best way is to make sure that you didn't turn the tiller bolt here itself when you're
loosening it, with a secondary allen wrench, because anytime it's making simple small adjustments
like that, it's changing your draw weight.
Once you have the lock free, all you do is pay attention to the actual allen wrench,
and then make adjustments.
When looking at the tiller bolt like this, when you turn the allen wrench clockwise,
you are increasing the draw weight, and when you turn the allen wrench counterclockwise,
you're decreasing the draw weight.
There are rough manufacturer recommendations as far as the maximum in, and the maximum
out of turns.
You have to pay attention to this, because it is a safety hazard.
You can not only damage your equipment, but you can also injure yourself if you have the
limb bolt out too far, so you must always reference your manual from the bow itself.
If you don't have that anymore, do a simple Google search, or if you don't know and can't
find it, please comment below, and somebody may help you out.
So, after I make my adjustments, say I want to go up in draw weight, I turn the top tiller
bolt one full turn, I now hold that allen wrench so it doesn't loosen, take my other
set of allen wrenches, and tighten the lock until the tiller bolt will no longer move,
and then when I do to the top, I must do equally to the bottom.
So again, what I'm going to do is loosen the bottom tiller bolt while holding it in place,
and it may click like that, don't be alarmed, it just means that your tiller bolts were
nice and snug.
So loosen it a little bit, again, clockwise because I want to increase my draw weight,
one full turn, now I hold it so it does not move, and tighten it back down.
So, I just increased my draw weight one full turn, and depending on the strength of your
limbs, this will change your draw weight in varying amounts.
After you string your bow back up after making your adjustments, it's a great idea to check
your tiller and your brace height and make adjustments as necessary to get the bow back
in spec.
If you don't know what tiller or brace height is or how to adjust it, I have links in the
description below and a card at the top up there to a playlist, Archery Basics Explained,
and individual videos in the description below so you can check those out and learn how to
adjust your tiller and brace height.
Before I end this video, I want to show you a sign that you're ruining your bow when you
don't unstring it when you make these tiller adjustments or draw weight adjustments.
I'm going to first loosen the lock, you can see the bow is still strung, so now what I'm
going to do is what you shouldn't do, turn the tiller bolt while it's strung, but listen
carefully.
Hear how it's not making some happy noises and it's actually kind of choppy and not really
adjusting very nicely?
Because something that is not good is happening within the system and the bow is trying to
tell you something.
So listen to your equipment and don't push it.
The best idea is just to unstring your bow and change your draw weight that way.
It's safer for the equipment and safer for yourself.
Thanks for watching Archery Basics Explained.
If you liked this video, please comment below and let me know some other subjects you want
me to cover.
I want to make sure I'm producing relevant content for archers out there like you to
absorb.
Also, if you wouldn't mind, consider sharing this video.
Do subscribe, hit that notification bell as well, and do consider supporting this channel.
Again, I produce this content for free for archers around the world to enjoy and I can't
thank my supporters enough.
