Most men struggle with uneven or bulky sideburns — and one small mistake can throw off your entire beard. In this ASMR beard grooming tutorial, I show you how to properly trim and blend your sideburns like a professional barber, step by step, using the exact tools I trust.
If your beard looks messy from the sides, this video will fix that problem fast.
👇 TOOLS & EQUIPMENT USED IN THIS VIDEO 👇
(Links below help support the channel — appreciate you 🙏🏼)
This video provides a comprehensive guide on how to straighten and shape a beard, specifically addressing the issue of \"wispy\" or flaring hairs that disrupt the beard's overall silhouette. The creator demonstrates the tools and techniques necessary to achieve a clean, professional look at home, whether the goal is to maintain maximum length or a more tamed, structured shape.
I have these wispy hairs or these hairs that curl out like this and it kind of throws off
your beard shape.
In today's YouTube video, we're going to go ahead and show you how to solve that problem
and how to get it looking right.
What's up YouTube, welcome back to the channel.
So today's video I'm going to be going over how to straighten out a beard and then as
you're going to tell, these hairs are super long so they start to get either wavy or they
start to like kind of flare out when you straighten your beard and it throws off your whole beard
shape.
So I'm going to show you a simple way on how to straighten out your beard, how to go ahead
and shape it, have a proper, nice shaped beard, especially if you're trying to grow it out
longer.
We're going to really tame down the sides and leave the length probably, just clean
into it, line up everything and that's pretty much going to be it.
I'll go over the tools I'll be using and the beard straightener I'll be using and going
over all the steps.
Right?
Let's get into the video.
First, this will be the beard straightener I'll be using, it's a cordless one, it's Carbon
X Pro from The Beard Struggle, using a clipper and trimmer from Stylecraft.
This is their at-home or travel case, comes with a clipper trimmer in all your regards
so this is all I'm going to need and a shaver just to tighten everything to make sure it's
nice and clean and doesn't skid.
Let's turn on our beard straightener, alright, we're going to go ahead and click that and
get it to 400 degrees and that's going to warm up.
While that's warming up, it usually takes about a minute or two to warm up.
I'm going to be showing you guys two different ways, I'm going to show you on both sides,
I'm going to show you two different ways on how we can get rid of this, alright.
One's going to be a little bit more advanced and one's going to be a very simple and easy
way you can do at home, depending on your skill level, be the clipper I'll be using
and the trimmer I'll be using.
Number 2 guard, which is a 6mm and then you'll need a 1.5 guard, which is a 4.5mm guard,
you'll need a 4 guard, which is 13mm in length and then a 6 guard, which is 19mm in length.
Those are the guard lengths that you'll need, we might not use all of them but those are
good guards to have.
So the beard strainer is set to 400 degrees now, so let's go ahead and straighten out
the beard.
What I like to first do is go down with it, just to get out any knots and just to straighten
out the beard and then we're going to go up, sideways and then back down.
Now we're ready to go up, now let's go sideways, we're going to start back down.
So when you're coming back down, you don't want to go underneath your beard like that,
you want to come right off your face, so it keeps it, off your face, keeps it more structured.
When you go in, that's when you'll get those kind of dips in your beard, it's because you're
pushing under the chin, causing a dip right here, compared to coming off, straightening
out the hair.
So that's done with the beard straightener, turn that off.
So what I was talking about are these things right here, okay, so as you can tell these
are super long and there's two ways you can deal with these, okay, so as you can tell
it kind of throws off the shape a little bit, especially as it gets longer.
So there's, like I said, there's two ways you can deal with this, either one, you keep
letting these grow, you just go through the pain and the awkwardness and you let it grow
so these start to get long enough to where they start to blend in with the rest of your
beard, right?
And that will overall give you a longer beard.
So if you are trying to let your beard grow for multiple months and really want a long
beard, a full beard, that's what you would do, just keep it, let it, don't even touch
it, just let it grow, straighten it out, brush it down and just let it catch up to these
other lengths so it can all grow out long, right?
But if you don't like that, if you like the big beard look but you want it to look nice
and shaped, tamed, what we're going to do is start taking these down and blend it into
the beard so that this is nice and tight here and then it goes longer, okay, most people
like that because it's easier maintenance and I think it just overall looks a lot nicer
and cleaner.
So it really just depends on what your goals are with your beards and that's how you'll
attack it, right?
So if you want a longer beard, let it grow, if you want it nice and shaped, that's where
you'll continue watching the video.
Alright, so there's two different ways you can deal with these, okay?
As you can tell, it's more right here, okay?
It's always good to like mess with your beard, kind of look at it, because as you can tell
right here, this needs to be taken by back ears, it's pretty good, so you don't want
to go too much.
What we're really focused on is right here, about the earlobe, a little bit below the
earlobe, okay?
We're trying to take away all this length so it's blended in with your sideburns and
it's blended in with your beard.
First, take a longer guard, okay?
So I'm going to take a 6 guard, so my beard is pretty long, take a 6 guard, put that on
there and what we're going to do is go right where it's at, it's all right here.
So what we're going to do is just take a 6 guard and just take away some of that bulk.
So what you do is, so my jaw is right here, so I'm going to try going right above my jaw
on my face and go straight up.
So it's still long, but it definitely took some off, a lot shorter than this side now,
but it's still got that little flick.
So what we're going to do now is grab the 4 guard, now obviously as you do this more,
you'll kind of understand how your beard is.
I could have went straight to a 2 guard probably, but just for learning purposes, I want to
show you guys the different steps and because there's different lengths and you might like
it at different lengths.
So we got the 4 guard, same thing right here, take that straight up.
Okay, see?
So that 4 did a world of a difference and now look at the difference.
Look how straight this side is and then look at this side.
See the difference?
2 guard and just go with it.
That's not probably going to do much.
Yeah, so we're past here.
So I'm going on my face, I'm just kind of flaring out and kind of blending in whatever
it is there.
There you go, now we got that difference.
So that's one way, is use guards and just land that out and it does a pretty good job
and it's pretty beginner friendly, should be good.
But if you're a little bit more advanced, I'm going to take this off, I'm going to
show you how to do it by freehanding.
All right, so now this side, I'm going to go ahead and freehand it and all you're going
to do, no guards on there, close the lever and you want the blade to be parallel with
your face, right?
So you want the blade like this, you want it parallel with the face.
When you go straight down, you're going to cut all that length off and you're going to
shape it.
See where the disconnect is, right?
This is coming out right here and then this.
So all we're connecting is from here to here.
See how quick that was?
Super quick.
Land it out and they pretty much look the same now.
I'm just letting my beard grow longer, I'm not really trying to cut it short, so I'm
really going to just line everything up, trim whatever long hairs I have, line up the neck,
just reshape everything and give it more.
To start, as you can tell, this is here, this is low, right?
So I'm going to use this as a reference.
I'm going to just punch that line in so I need to remove everything else, now with your
trimmer.
So I kind of slightly pull this down.
I'm going to use that same guy that I used.
See?
A little bit difference.
And like I said, you can always use that two-finger method.
Right now, I probably have about a one-finger method going on just because, like I said,
I'm letting my beard grow.
I don't know how many times I've said that, but by the end of this video, you know that
I'm not trying to cut too much length.
I'm just trying to let it grow.
All right, now grab your shaver, and let's cut this down to skin.
I'm going to line up the back, line up the mustache, and we'll be done with this side.
Also, another tip.
My beard is typically curly, so I know your beard texture.
My beard is typically curlier, so if I go wash, shower, and stuff, it's going to start
shriveling up a little bit.
I just like to straighten out my beard so I can see the true full length of it and just
trim the ends of it, right?
And I know as later on after a shower and things like that, it's going to curl up more,
but I know that it's all even now, so it's going to curl more.
So know your beard texture.
Know if you want it more.
How you style your beard.
My beard is typically styled when it's more curlier, so that's why I'm taking a little
bit off because I know it's going to shrink.
You know, keep that in mind.
Grab another mirror to kind of see.
I'm going to go more sharp with it.
Yeah, like that.
That's why it's super important to have a good trimmer.
You see how easy that was?
I was able to go this way, kind of poke at it, and it cut the hair two swipes.
Didn't push it in, didn't mess it up.
That's how typically guys mess up their beard is they have a trimmer that they have to keep
going over it multiple times, and then eventually your next hit misses.
So that's why it's going to have a nice, sharp trimmer.
We're going to go ahead and line up the mustache.
Comb everything forward.
Go ahead and just line up everything on the left.
See the difference?
If you're someone that has more of a rounder face, keep this nice and tight.
If you're someone with a, you know, a long face, I want to go as tight right here.
I want to keep it wider to kind of balance out your face.
Now, what you do to one side, you do to the other.
This side of my beard grows a lot farther back compared to this side.
So it's good to use the other mirror to really see the shape from different angles.
I like to smile because it really brings those hairs over.
So when you're smiling, you don't have those hairs hanging over.
To double check everything, we'll look at it through the mirror.
Got these areas.
This side looks pretty good as well.
There is just using this short hair as reference.
So I'm going to keep it tight and just follow out.
That's what we did.
Went over.
Check the beard.
We strained it out.
Get all nice and even.
We went ahead and took down the sideburns.
Keep this area nice and tight, slim, but into the length.
All right.
Trimmed up the neck.
Got that nice and lined up.
Trimmed up the back.
Cleaned up the mustache.
And we finished everything off with a shaver.
Get it nice and clean.
Let this last actually a couple days.
And that's about it.
And then always after you have got a nice beard shape up, I always recommend getting a beard balm.
This is Joseph's Signature Line Beard Balm.
This is my own beard balm.
This is the Vanilla Mango one, which is by far everyone's favorite.
But we are actually all sold out of the beard balm.
But there is still the Sage one.
So if you did want to order yours, you get the Sage one.
But the Vanilla Mango one will be back in stock hopefully soon in the next month or two.
But go ahead and run it under your hands.
Get it nice and warm.
And just go ahead and lay over everything.
And kind of put it into the shape you want.
So I want to go really tight on the outside.
Kind of tuck this in.
Taper it in into the length.
That's how you straighten your beard, shape it, line it up at home.
All right.
If you guys like that, like the video, subscribe to the channel.
We got more content like this coming.
Make sure to comment down below if you have any questions
or what you guys learned from the video or anything like that.
I'll have everything linked in the description.
I'll see you guys in the next one, right?
Peace.