Carp Fishing Essentials; Everything You Need In Your Rucksack

Nature Pulse ๐๏ธ
4 followers
4 Video ViewsยทAug 18, 2026
AI GeneratedยทMay contain errors
Video Summary
AI GeneratedThe speaker provides a comprehensive walkthrough of his essential carp fishing carry-all bag. He details the bag's physical features, its organizational layout, and the specific tackle and tools he keeps inside to ensure he is prepared for any session length, from a few hours to a full week.
This bag is one of the most important bags I have within my carp fishing because it doesn't
matter if I'm doing a few hours, a whole day or a week-long session, this is almost always
the first thing packed because it has all the essentials or a lot of the essentials I need
to get fishing. So I thought I'd give you a rundown of exactly what it is that's in this bag,
which you probably see all the time when I'm going fishing. Starting off with the bag itself,
unfortunately, this is no longer in production. So if you like the look of this bag,
tough luck really, you'll have to find an equivalent, but there are lots of bags out
there like this. As you expect, padded back, padded straps, but often this gets chucked on
the barrow. It doesn't often actually go on my back, but that's beside the point. It still houses
everything I need to. Two grab handles so you can carry it around a bit more like a carry-all,
and you've also got the chest straps, which when it comes to bags, I don't think I've ever
used these. Does anyone ever use these when you put them on? Chest, like strap it across
your chest, beside the point again. But on the bottom, you've got a tough, I'm not sure what the
material is, but a tougher base because this is how it sits on the ground. You've got some little
poles out here or elastics here, four poles, which I'd say I've used once in the time I've had this
bag. Don't use those, but that bottom bit is the main thing because when you take it off your bag,
off your back, sorry, you plonk it down like this, and it's a nice hard-wearing base to work from.
And this is quite an interesting bag because you unzip the main compartment like so,
open it out, and it holds itself up on these straps here, which you can adjust so you can
slack them off if you want to completely open, or you can tighten it if you're on a bit of incline
and you want to make sure it doesn't fall backwards. So this is the main compartment
of the bag. At the moment, I've just got my scales in there with my carp care kit,
so that's all ready to go if and when I need them, which I am currently fishing. The rods
are out behind the camera. I might get a bite, but they haven't been doing much on this trip
besides the point. But this is the main compartment. You can fit a big bucket in here if you
want. So if I'm going surface fishing, I can put my bucket in there, which has the mixers and all
those bits and pieces. This tends to become like that drawer you have in your kitchen or wherever
you have it in the house. It just has every odds and ends. It doesn't really have a place. You
bung it in there. So I've got the scales, I've got spare spombs, I've got spare hook bits or
rig materials, I've got my surface fishing little tackle pot, and it changes. This bit changes,
but up here, it doesn't change. So if I open this, there's another really cool feature of this bag,
is a little bivvy table, I suppose. So that's quite handy when you're doing rig tying,
storing everything. But underneath that, you can probably see you've got two retaining
pockets with elasticated straps where I've got my bivvy light, and the other side is my
PVA mesh. So two things which, again, holds it in position. You never lose them because as long
as you put them back, of course, you know where they're going to be. And then there's a see-through
pocket here, which has my head torch, some allen keys, random little tools that I might need
occasionally, odds and ends that I don't use very often, but they're still in there in case I do
one day. So we'll put that one back up there, close that back down, and onto the outside pockets,
of which there are three. We'll start off with the one that's closest to me. This one houses, well,
not at the moment because I'm fishing, normally houses my bank sticks, buzz bars, alarms,
receiver, and there's a little pocket in here where I put spare leads as well. So this pocket
at the moment, as you can see, is empty, but that is where the stuff that I usually store,
like I said, is currently fishing at the moment. So that's where that one's empty. If I then spin
the bag around and go to the other outside pocket, we have my rig wire. Now I'm actually
using this less and less. I'm starting to find that although I have rigs already tied in here,
I'm often finding I'm retying them when I'm on the bank anyway, because I like a real fresh hook. So
this might very soon become a bit more redundant because, like I just said, I like to have fresh
rigs when I'm putting them out now. And sometimes there's some odds and odds in the bottom of that
pocket, but typically it just houses my rig wallet and that keeps it nice and secure.
And lastly is the top pocket. So this one fits my Nash box logic, I think it is. Let me just
check the name of it. It is indeed my box logic tackle box. So this holds everything I need,
all my essentials, although some of the stuff probably is gathering dust if it's possible.
And that is my tackle box. I have it fairly neat and tidy. In fact, I'm just going to
rejig that camera so you can see it a bit clearer. There we go. So I'm aware there is now a camera
stuck to the side of me, but I'd rather you could see and have this in the way and have it over
there and you can't see. Makes sense. So here I have all my rig tools. I've got a closed latch
needle, boilie needle, a bait screw and a spare boilie needle because you never know how many
boilie needles you're going to need. There's nothing worse than snapping one of these on a
session and not having a spare. So I have both in there. If I move them out of the way quickly,
you'll see underneath are all my hooks and I've stuck to the same hooks. As you can see, there's
only two different patterns bar chod hooks, which I can't remember the last time I used chod hooks.
I've got these snagsters in both barbed and barbless and I've got the strong bows. Now the
snagster hook, if I bring that up to the camera for you. There we go. This is quite a heavy gauge
hook, a bit thicker and kind of like a, I don't know, a squarish wide gape. So it's a strong old
hook. I don't use these as much as I do the strong bows because the strong bows, I don't like the
hooks, are these. They are a curve shank. This is actually the barbless version. Like I said,
I use both depending on venues and rules. And I love how they're packaged super, super sharp out
the packet. They are Gamakatsu hooks, but they're sort of through pole position. There's a bit of a
collab going on there. So those are the hooks. But if I'm surface fishing, of course, I use
something different. So here you can see I've got the Cryogens. Sometimes it's Fox ones. I'm not too
loyal when it comes to surface hooks. I just like to have a different hook because they're
typically a thinner gauge. And again, some little tubing stuff to fine tune my surface rigs when I
do them. Then I've got my rig bits. Everything's labeled, as you can see. I've done this quite a
few years ago. And in here are exactly what I just said, rig bits. I've got line liners, bait screws,
little roddy sleeves, bait stops, shot on the hooks, those sort of things that keeps it all
nice and neat and tidy. And I know that if I need one of these things, it's going to be in one little
tub rather than looking through the whole tackle box. Underneath that, tail rubbers and foam. These
are just longer items, as you'll see. I'm going to open that up. You've got foam, tail rubbers. I
think there might be a few other random little bits and pieces in there, but that's pretty much
everything that's in there. And underneath, I've got some hooked nylons and random bits and pieces.
On the next one, I have my scissors, two lighters. Again, you never want a lighter to run out on a
session. And making sure they're high-vis is actually quite a good thing to do, because if
you drop them, if you're anything like me, you'll start rig time. Rather than having it all in one
place, I'll put something here, I'll put something there. For some reason, I'll put something on the
bivvy roof, and then I'll put something in the van. I just put stuff everywhere. Having high-vis
things makes it a lot easier to see them. And I've got my swivels. This is pretty self-explanatory,
but again, all picture-coordinated rather crudely, but it does the job. I know which swivel is where
and few bits and pieces down some more. I'm thinking floats and hooks and tubing and things
like that. Then we move on to my hook link materials. Now again, I don't chop and change
too much when it comes to my hooks. I don't chop and change too much when it comes to my
hook link materials. And these have been in here for quite a long time. So I'm guessing
I'm going to have to upgrade or replenish very, very soon. Typically using the skin link,
which I think Nash still do. Was it armor link before? I think they've changed names, but
stiff-coated and I've also got semi-stiff in silks and weed. In the middle, I have a
rig puller tool, a Stanley blade, which is what I use to trim down my boilies. When I'm making
snowmen, I like to flatten off the bigger bait on the bottom so that the pop-up at the top,
I can shave down and make them sit nice and flush. That's the reason for that.
And then I've got some little tubs with artificial maggots, artificial corn, lead clips. And I think
another one of those is also artificial corn as well. So that's what bat pit is.
Onto the last little compartment, I've got a stripper tool, some PVA tape, some bait floss,
some putty, some more PVA tape. I think one of these is meant to be in my solid bag bucket.
Then I've also got some more braid. Now the reason I've got this one is because this is super soft
when you strip it, because when I tie solid bag rigs, I want to have a supple braid as possible.
So that's what I use this for. I don't tend to have it for its coated properties. I have it for
once it's stripped back. As you'll see, it's really, really supple.
I think we're nearly there. I've got some bait elastic or microelastic. That's for
sometimes if I'm threading on worms and I want something to hold them on, that's what that's for.
I think I've reached the bottom of the tackle box. Let's put it all back in now so I don't forget
and make it nice and tidy and pop that in there. That goes there. Everything's got its place.
They sit there. This one goes there. All my tools go here. And all being well,
that should shut nicely. It does indeed. Slide that back into its poppet and we are sorted.
That is my go-to carry-all fishing bag every time I go fishing. Like I said, it's a day session,
48 like I'm on right now or if I'm going for a week. This stuff never changes other than the
compartment, like I said. The other things that change will be rods, reels, bivy, bed chair.
Obviously, most of those things stay the same, but this is the core foundations of everything
I need when I go fishing. If I forgot this, I'd probably be pretty stuck. I hope you enjoyed
having a little look through what I take with me in this bag and make sure if you haven't done so
already, subscribe to the channel for lots of more, lots of more, lots more, nothing but extra.
I should have said nothing but extra, lots extra. Can you tell this is one of the first ones I film
for this new channel? Anyway, I'll see you in the next one.
