In this video, we take a look at the Anzo USA aftermarket headlights available for the 2023+ Chevy Colorado. I’ll walk you through all the key features, light output test comparison, design details, and then show you a full step-by-step installation so you can see just how easy it is to upgrade your truck’s look and performance.
If you’re looking to change up the front end of your Colorado and stand out from the crowd, these taillights are definitely worth checking out.
Use code "outlandish" for 10% off Anzo USA products.
What's going on guys we are back with another video my name is Armando and they are finally
here after almost two years the Anzo USA headlights are here for the Colorado market.
I want to say starting off first and foremost please excuse the explosion in this garage as
we just moved into our new home last weekend so everything's still a little bit of a mess
but in this video what we're going to be going over are all the features and what to expect of
these headlights. I'm going to be going over comparisons with a lux meter on brightness
versus the OEM LED headlights and as well at the end of the video I'm going to show you how to
install them so let's jump right into it. I know first and foremost a lot of you are going to be
asking when are these going to be released and how much they are and at the time of filming this
video I do not have those answers but hopefully by the time this is uploaded they'll appear here
at the bottom of the screen for you guys so that way you guys have that information. If you do plan
on purchasing these headlights I do have a discount code outlandish which would save you 10%
off your entire purchase. I almost forgot to mention these are directly plug and play and
work for all Colorado models so that means even you guys with the halogen headlights can fit these
too. I need to stop the video right here and interrupt my past self because at the time of
filming the video I was told from Anzo that the Anzo USA headlights would fit all trims and that
is now not the case at this time. So if you're unaware when this video is released the headlights
were released the Friday before so just a few days from when this video was released and just
before then they did some last minute testing on halogen models and found that there was an issue.
That issue being the daytime running lights weren't working on the halogen models as intended.
All the other features work turn signals low beam high beams it was just the daytime running
lights they were having an issue with. So they want to make it right and have it work as intended
so they are currently working on a module so that way you're able to plug in that module
into the wiring harness and then them work. So they are eventually going to be out for the halogen
models it's just taking them a little bit longer to get that module made so that way all the
features work as intended. So over the last couple days I've been communicating with my contact in
Anzo and they have already actively started working on this module and working on finalizing
it so that way they can get into production. So it just needs to be a little bit longer for you
halogen guys but I promise it is worth the wait these lights are amazing. Now back to the rest of
the video the only difference is they have an additional wiring harness that you have to plug in
in order to work but it is still plug and play for you guys so this works for
all Colorado models. Into the features we have to talk about the housing itself so the housing is a
fully blacked out housing with a clear lens with three projectors as you see there the two outer
ones being the low beam and the inner one being the high beam. You also have the giant daytime
running light that goes all the way around that also is your turn signal which I'll show you
momentarily and then you have your outside reflector. So one of the very first features
you're going to run into is the startup sequence so when you get to your truck and you unlock it
it has this little startup sequence which I'll show you here. Now unlock the truck and there you
go that is the startup sequence for the headlights and you can see the white DRL and the low beams
just turned on there. You may now be wondering why the daytime running lights are white instead
of amber like in the introduction and that moves us into our next feature which personally is my
favorite feature and that's because you can set it up however you like. If you want a white daytime
running light just like this or if you want the amber and it's as easy as going right behind the
light right here this right here is a switch and you just simply push it up and it automatically
switches over your daytime running lights to amber. So depending on your mood you could either run
white daytime running lights or amber daytime running lights or both if you wanted to. I will
tell you guys one of the reasons these headlights took so long is they were really perfecting these
headlights and if you guys remember I had the pre-production the first first headlights available
on my truck and one of the big changes they did were these daytime running lights. They are so
smooth across these are OEM quality I would argue even better than the OEMs as far as how even the
light dissipation is for the daytime running lights. Moving on to the next feature and that
is your turn signals. So your turn signals are sequential turn signals that use the daytime
running light bars as you can see here this is exactly how your turn signals will look.
Which side note if you have them paired with the Anzel tail lights look really really good. As you
guys can tell the fit and finish of these headlights is extremely well. It sits perfectly
flush with all the panels along the body absolutely perfect all the way around. Another
little feature obviously to adjust your beam pattern as far as going up or down is right down
here in this hole there'll be a little turning knob. Basically if you turn that counterclockwise
you'll lower the beam if you turn it clockwise you'll raise the beam. So just in case if you're
how to adjust these. I figured some of you guys would be as curious as I am whether the Anzel USA
headlights output is either better equivalent or worse than the stock ZR2 LED headlights.
And for that we're going to put it to the test here. I bought a lux meter off of Amazon which
measures the lux output of any light. So we're going to be using the garage door here as a
reference point and we're going to be testing the stock ZR2 LED headlights output first. We're
going to be testing the low beam and high beam and then after we're going to be testing the Anzel USA
headlights low beam and high beam. To do this test and make it as equal as possible in the testing
there's one thing that I unfortunately can't control and that's all these windows on the
garage door. Do let some light in but all the other lights in the garage will be off. The truck will
be in the same exact position as I have you see down here I have taped off where my front left
tire sits so that way after I finish installing the Anzel headlights I'm able to put my truck in
the exact same position. The other benefit of doing that as you can see here I have put tape
on the garage door and I would highly recommend doing this if you have garage door or any flat
surface you can park your truck head first before installing the Anzel USA headlights is that way
you're able to mark where your low beam headlights go so that way after you install the Anzel USA
you can adjust them park it in the same place adjust them accordingly so that way you're not
blinding people on the road. So we're going to start off first with the stock ZR2 LED headlights
we're going to be testing the low beam. Currently the lux meter is set to a max reading so it's
going to show on the screen whatever the maximum lux it gets from the headlights and I'm just going
to be passing it along both headlights just in case one is slightly brighter than the other.
All along the perimeter here so far we've reached a maximum of 17,700. Let's see if that number gets
any higher here and it does not seem to be getting a higher so that's our maximum reading
of the stock low beams is 17,700 lux. All right so we now just flipped on the high beams and we're
going to do another test to see if it's any brighter and what the maximum reading is going to be.
All right we have jumped up to 22,100 lux with the high beam on that side.
I'm going to run it along this side to see if it gets any higher and I just got a max reading of
24,400 lux with the high beam on this side so actually final number here is 24,500 lux for the
high beams on the stock ZR2 headlights. Moving on to the Anzo USA headlights as you can see the last
few hours I've been busy installing them and I have already aligned them to the factory height
of the low beams. We're going to be testing out the low beams first of course and the truck is in
the exact same position thanks to the tape on the floor the tires are all lined up there. Visually
I can say I haven't done a test yet this will be the first time doing it but I can say visually
they are a lot brighter than the stock OEM ones so we're going to test together and see
how bright they actually are according to our lux meter here. So we're going to go and do the
same test we're going to test each headlight and just get the max number of whichever the highest
number is. If you don't remember the stock LED ZR2 headlight low beam was a the highest rating we got
was 17,700 lux so I'm not going to give away yet but I will say so far it's already significantly
higher. Oh we just went up a little bit more. All right so the results are in we are sitting
at 27,900 lux so nearly 28,000 which blows the OEM low beams LED low beams and it also surpasses
the OEM high beams which is crazy. So let's get on to testing with the high beams. Jumping into
our high beam test for the Anzo USA lights we're going to jump right into it and do the same thing
as always we're going to go over each beam. If you guys remember the OEM LED high beam was
24,500 lux which the low beams on these Anzo USA's already surpasses that so I'm interested to see
what our results are here when we finish running here. Wow that is crazy so from our results here
the high beams got a 56,700 lux rating so over double the LED OEM headlights that the high beams
specifically which is crazy. So after these results it's pretty conclusive that the Anzo
USA headlights are not only a visual upgrade but they are a performance upgrade over the OEM
headlights. For all you Colorado trims out there owners that have the halogen headlights this is
no brainer upgrade and for all you LED OEM headlights out there just like me I didn't
think the difference was going to be that substantial but as I just showed you guys
it is a night and day difference the brightness over the OEM LED headlights which are already
really really good so I could only imagine at night how bright these are going to be which
is going to be great. Hopefully you guys found that test super helpful and maybe swayed your
decision more on why these headlights are super cool but now I'm going to show you guys how to
install the headlights onto your Colorado. Luckily for me I recorded about a year and a half ago
a video of me installing the pre-production version on my Colorado which worked out because
obviously now you can see I have an aftermarket bumper and before then I did not I had the OEM
bumper so I'm going to go over on how to disassemble that. Please forgive me as far as the video
there's a few spots that jump around of me missing screws because there was at that time
there's really no info on how to take off the front bumper so I was kind of figuring it out
as I went on but hopefully you guys find how to install it helpful. All right so first thing we're
going to do is we're going to want to take this front skid plate off so that way we can access easier
some bolts underneath in order to take off the front bumper. So what you'll need is a 13 millimeter
for these guys there's three bolts that go across and then for the other four bolts which is one
two and then there's two in the back you'll need a t40 torx head to get those out. All right after
removing that lower skid plate the next thing you're going to do is you're going to pop out
these little things in your bumper and there's going to be a bolt back there you can see kind
of sticking through that is another 13 millimeter and there's one on each side of these and just to
pop these out just use a little plastic tool remover like this one and they pop right out.
All right next step is you're going to come under here under the bumper and there's going to be four
t15 torx head bolts that you're going to have to remove here. Now on the top side there's going to
be four t15s as well located right here. You will have to pop your hood open for this to access
these bolts but you're going to want to remove these four t15 bolts here. All right so we're
over here to the wheel wells and you're going to want to remove these four t15 again bolts here
little screws here one two three and four so that way we can peel the liner here so we can access
behind the liner. All right so there is a fifth more liner screw the wheel liner screw that you
will have to take off back here. All right now that we got the liner peeled away what we're
going to be doing here and this is the passenger side we're going to want to be disconnecting
all these little connections here so you can see there's one and two connections we're going to
want to disconnect here and then there's two more t15 bolts right here that we're going to have to
remove as well and then you're going to have to pull out this fender liner there's going to be
two clips here that we're going to want to pull off so that way we're able to free up the front
bumper. So for this flare as you can see I pulled it off there's basically five tabs there that you
have to pop off in order to free up enough space for this that way it can kind of pop out so that's
have to do there it's about five tabs it you kind of have to just gently pull and it's a little bit
uncomfortable but it will pop off there and we have to do the exact same thing on the other side.
All right so starting how to start getting out the bumper it's just like your typical normal
bumper side tabs you kind of have to pull them out it's best to try to kind of get your hand
underneath hold this fender flare out and then just pull it out and you'll have to do this on
both sides. All right so the front bumper is officially off now sorry I wasn't able to record
the process that's kind of a pain it is kind of more of a two-person process than it is a one
person. One thing I did for didn't do and forget to do I didn't realize these two clips that we
ended up disconnecting you also have to remove these from their holdings on the bumper because
if not this is part of the bumper that it gets taken away so you have to remove these guys from
the bumper of them holding. Now on the bumper side of things we'll look at it from so this is the
bottom of the bumper and that's the top this is where those clips were that we pulled off
as you can see there's kind of all these little clips that you kind of just have to pull out and
yank and then there's these two bigger clips on either side that you have to kind of give a big
yank to and you can see those clips up there so you just kind of have to pull on them pull on those
and pull on those and then those two and it comes right out. So now that we have the bumper
out of the way it's now time to remove the headlight and to do so it's three 10 millimeter
bolts as you can see there's one here on the side the whole reason for removing the front bumper
two and three so once we remove those three guys we can be able to remove and then just
simply once you pull that out we'll be able to disconnect the headlight. I completely
missed this screw there's actually a fourth 10 millimeter underneath the headlight so here's the
headlight right underneath it there's a fourth 10 millimeter that we have to take off. Now with the
factory headlight out of the way it's the exact same process with our Anzo headlights here just
got to take the kind of saran wrap off of it same process uses all the same factory locations of the
four bolts and it's just a plug and play system so let's get to installing that real quick. Future
self here want to quickly interrupt the install video because we're probably here at the portion
where you're installing your brand new Anzo USA headlights and want to give a little update because
when I filmed that video that was the pre-production version and I didn't have a lot of information on
final production. Now here with the final production if you have an LED factory LED
headlight on your Colorado the Anzo USA headlights are simply plug and play. If your Colorado came
factory with halogen headlights in the kit there is a wire harness that comes with every headlight
and in there there's a little paper that'll show you how to wire up this is specifically only for
Colorados with halogen factory halogen bulbs so you just got to do this extra step follow the
guide in here to plug in this harness so that way your new Anzo LED headlights will work with your
truck. And with that, that is how you install the Anzo USA headlights. Hopefully you guys found this
entire video helpful. Don't forget to use code outlandish at checkout to save yourself
10% off your entire order. If you like the video make sure to leave a like
and subscribe if you aren't and we'll see you guys in the next video.