We pick up right where Part 1 left off on Metal Masher in Moab, Utah. After Ali’s Silverado ZR2 suffered a major rear axle failure due to the lift blocks, the challenge was no longer finishing the trail, it was figuring out how we were going to get a broken truck out.
With the rear axle rotated out of position and the Silverado unable to make it through the remaining obstacles on its own, we begin the long recovery process. Unfortunately, Metal Masher isn’t exactly an easy trail to get a disabled full-size truck out of.
Using our winches, recovery gear, and a lot of teamwork, we slowly work the Silverado up and over obstacle after obstacle. Every section brings a new challenge as we try to keep the truck moving without causing even more damage.
What started as a day of wheeling quickly turned into a full-on trail recovery.
Can we get Ali’s broken Silverado ZR2 off Metal Masher and back to Moab under its own power? Watch until the end to find out.
If you haven’t watched Part 1 yet, make sure to check it out first to see how we ended up in this situation!
Vehicles in this episode:
Chevrolet Colorado ZR2 Chevrolet Silverado ZR2 Nissan Xterra 2-Door Jeep Wrangler Rubicon
If you enjoy off-road adventures, trail failures, recoveries, and seeing what these rigs can actually handle, make sure to LIKE, SUBSCRIBE, and turn on notifications for the next episode!
So the plan is winch him up use my truck as a winch point and winch him up so that way we're
not putting stress on the drive train. It's twisted like my drink. Keep it twisted. Walking the trail.
All right so as you just saw we have successfully winched up Allie over kind of the first big
obstacle since the breakage. So the plan is to just slowly kind of navigate our way up and around
and for all the bigger obstacles winch him up use my truck as a winch point and winch him up so that
way we're not putting stress on the drive train to potentially make that situation a lot worse.
So so far it's working so fingers crossed we're able to limp it off the trail under its own power.
We are winching up he's using a little bit of his own power majority of the winch to get up this
main big obstacle and then as our truck is big bertha we've used it as an anchor point
put rocks underneath some wheels to essentially help get him up pull forward just a bit
a little bit more slack on that winch. That looks like an uncomfortable angle if i've ever seen one.
It'll climb there right? The problem is is you're climbing with your driver tire your passenger tire
probably has like a half a foot. Maybe not. There was a huge rock there but it's not anymore.
We'll just go straight. Okay. We'll make it a little bit easier we'll just go straight.
It's still a challenging thing but quite frankly we already have a breakage on this trail.
Let me put my lockers on so it's not slipping as much.
There she goes. Turn off lockers got a little bit of a better turn radius.
Well like i said we still had uh still made a fun line i just
could i probably have done the other line probably but we're just making it fun but not
too crazy because uh we don't need to have two vehicles.
We got this little next little section here
that i'm gonna get set up so that way i can winch Allie up this next section so
stuff is slick we're not putting stress on his drivetrain and getting funky.
You can see Drew in the Xterra navigating the obstacle I just came up but you can also see
Allie in the Silverado taking a much easier line in the background. This was just to get him into
the next position for the next set of obstacles where we'd have to winch him up. A little crab
walk getting the winch line pulled out hooked on with the soft shackle to get him up this first
part. If you're liking the video so far make sure to leave a like and subscribe to the channel if
you aren't it helps me out a ton and that way if you're subscribed you don't miss out on any future
videos. In the rear tire yeah sliders there you go i thought you were framed out for a sec.
If you go a little bit more passenger there's some rocks that you'll catch with the rear
a little bit passenger good catch
give me a little bit passenger and then turn this way keep her coming yeah try that there we go
try try going forward but go a little passenger
no yeah so cut hard that way um yeah you're just digging deeper we don't need another broken one
yeah so the way he's stuck opt in for a winch so it's hooked on Allie's truck over there
and uh he got himself up that ledge is a little deceiving so
Dewey is up he's avoiding that giant hole that we've all been hitting
and swinging for a more higher approach which is also more off camber
makes it look easy he's concentrated he's a very serious man while he's wheeling
you guys know i love non-jeeps especially this amazing rig that is coming in so many videos to
be released in probably two years he has done some incredible wheeling in this thing
and this just wasn't his day yep sometimes it's just not your day and i have plenty of videos
on my channel of me and the zr2 of it not being my day but hey that's what it's all about we're
just transparent here on this channel we don't seem like every trip is perfect i saw this i saw
this on youtube once oh yeah yeah how to fix when uh yeah look at that gap or that lift block it oh
i'm going too high i'm sorry my truck has so much lift even the block has lift yeah look at that
it's twisted it seems like it's untwisted a little bit right it's twisted like my drink
keep it twisty so you can see the extent of what's been causing the issue with the silverado but so
far we've been able to make it this far limping it on its own power so i mean that's a win always
when you're able to limp off your own power off the trail so we just gotta take it a little bit
and it's all down here from here we just have to get a little bit further yeah so it's just
downhill from here we've kind of reached the point yeah we've reached basically the
yeah the trail is downhill not not events if not events knock on wood i'll come over here and
knock on this dead stump but no the trail is downhill from here not the events we don't
want any more unfortunate events but so far it's been good we've as you can see there he
was tightening the u-bolts just to make sure it doesn't shift any more potentially as we
let this group of jeeps pass us so hopefully uh we can get rolling very soon here since we had
reached the peak of metal masher all of the obstacles from this point on were downhill
in alley's case that meant he just needed to take it slow and carefully work his way down
the series of steps ahead so he reached on the downhill portion the large ledge obstacle and
probably doesn't look like much on camera but this ledge which is a sheer vertical drop
comes up to about my mid-thigh so i would guess to me it's about a two and a half three foot
sheer drop of a ledge which even with my high clearance rear bumper i'm probably going to
smack the hell out of it so they do have a bypass that goes up this way that still has
pretty decently big steps on it but a lot more manageable with the uh pickup trucks you know
with having a pickup truck bed our our rear uh departure angle isn't the greatest but
when you turn around i mean look at this view that you have going up here it's absolutely gorgeous
all right so we're about to come down that bypass which still has a pretty big
ledge on it it's not small by any means i'm about to drop off yeah okay yeah we're sitting at about
23 degrees of pitch right now off that ledge and i'm just gonna slowly work
my tail end off of it there it is we were able to get around it and navigate around the cold there
and we are good supposedly that is one of the last mandatory obstacles along this trail
you're about to drop nice oh still hit that rear bumper there yeah i was trying to avoid it every
time i do it i don't think i have enough time to clear it so you see i think we made the right call
there if a two-door rubicon jeep wrangler rubicon hit it and they're on 35s i don't think uh myself
or ali would have cleared our rear bumpers there and probably would have dragged for quite a bit
so as you just saw us finish that large drop off ledge and technically we still have several
several miles of metal masher as you can see here on trails off road 17 is the waypoint of
the giant ledge you saw come down a little bit of the trail but due to the time as you can see it's
already 4 30 and we started this trail at nine o'clock in the morning we're going to be taking
this 8 waypoint 18 this green route here on the way out instead of doing the rest of metal
masher as you see there that way since we are still limping ali off the trail we're not having
to do any more major obstacles and we can finish at a reasonable time and not be finishing this
trail in the nighttime but highly recommend trails off road for any of your mapping needs i mean it
has as you can see all the waypoints of all the obstacles it's a great resource and i love it
and if you're interested in using it they do have a seven day free trial and if you like it you can
use my code outlandish overland so you can save 25 off your annual membership after that large ledge
we just had a few smaller ledges left to navigate down before connecting back onto the green trail
where things finally start to smooth out well armando dude this chevy colorado is absolutely
incredible dude can you tell me a little bit about your colorado i mean it is why is this
turd blocking the trail my god not a karen off-road karen again not a jeep
ifs does not belong on the trail where's your atv it's over there but don't worry about that
i need this off the trails i have a tow truck coming ten thousand dollars minimum
after that fun little reenactment for those of you who get the reference we said our goodbyes
and finished out the remainder of the green trail bringing this adventure to an end if you
liked the video make sure to leave a like and subscribe for more awesome content like this
and we'll see you guys in the next video