Xr650l Mods & Setup For Solo Motorcycle Adventure

Tech Care
3 followers
Aug 13, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a comprehensive walkthrough of a customized Honda XR650L optimized for a long-distance expedition from the Mexican border to the Arctic Ocean. The owner details specific modifications to the chassis, engine, and ergonomics to ensure the bike can handle extreme off-road touring and rigorous travel conditions.
All right, good morning internet. I'm going to give you guys a brief tour of this XR650L,
which is what I've been putting together over the last few months, six, seven months actually.
And I've been seeing a lot of stuff on the internet, guys trying to build these things.
And anyway, I'm hoping that some of the stuff that I've done will help.
I'm going to use, I'll use my phone to get some close-ups of some things. But yeah, here we go.
By the way, happy fourth. All right, I think, you know, I'll just start from the top,
probably some of the stuff that you can see. Handlebars down,
took the stock mirrors off, put the double-take on, simply so I can fold them out of the way when
things get rough. I was having nothing but trouble with the stock ones. I broke them.
So instead of breaking the, you know, for example, the brake lever here,
with the stock ones, you run the risk of cracking this housing right here. So anyway,
got rid of them, ball mount, great mirrors. I did a one-inch lift with the stock bars.
I really like the stock bars. A lot of guys, you know, they want to change them out and do
other things. That's cool. It's all personal preference. I don't get any flex out of them.
They're relatively strong. I've dumped the bike during testing,
no issues. Attached to, I've got the Bark Busters. I chose the Tusk. They work great. You can use
anything you want, but you need them to protect these levers, obviously. GPS mount. I use a
Zumo and obviously a camera mount. And then moving along, I put the short windscreen on there
for a couple different reasons. The buffeting and the wind really don't bother me, but what
does bother me is if I'm on pavement and in areas that, you know, you might have hornets, bees,
wasps. I don't like them. And when I get them in my jacket, it's painful. So the idea is as
the wind is up and over, it takes those little critters with them. All right, we'll just move
along through here. The rack, I actually built this rack. This rack is used to carry, I use
tubes. I put tubes on there and I use it for a fuel bag once in a while. Works great.
In the next portion of this video, I'll show you guys how I load this bike down,
so you'll get a good look of how that works. I have tested it. No issues.
Let's see here. Let's move down. Let's move down here to the rear rack.
Let me grab my phone out here so I can show you what I've done here. This is an interesting setup
and the reasoning is that, as we all know, the subframe on these
is weak. So what I did was I chose the tusk because it's got some very strong
frame supports. And then I also, not only that, what I did was, as you can see right here,
this is the tusk support running down right through here. And then what I did is I took and
put the nice CNC frame supports up top on both sides. You can see them on both sides there. You
see this one right here, that's the tusk. This one right here, that's the nice CNC. So it's doubled
up. I wanted to get as much frame support in there as I could. I believe it's fine. It's
extremely rigid. So, you know, there's that. Back here, I use the excursion and the Highlander
tusk system. I installed these for the straps. You'll see why later. I'll show you that.
Also down here on the sides, I drilled both sides, installed a straps,
you know, support so that I could get the right angle and pull on both systems.
When I first started with the excursions, I was strapping right in here. I didn't like it because
it was in the way of my leg. It put the bags right into my rear end. I couldn't make full use of my
seat, which is really important to me, especially the way I ride. And I think that's it for the
rear. I'm using two heat shields. I use this one to go underneath the side cover. This one,
obviously, so when the bags come across, it doesn't cook them. Works great. I've tested it.
If you're going to use the Highlander, I suggest you use two if you're on the XR650L.
And then, let's see, let's move along here. I used the Flatland Racing skid plate.
I've tested two other plates. I'm not going to say who they are. They just don't work.
This one affords the most protection, especially the lower sections here of the cases here. And
on the other side, I've got plenty on the bottom. Works great.
This side, I used a nice CNC case protector here. It just gives me a little more protection.
This guy right here is what I would worry about most. Rocks and so forth here, obviously,
they're going to miss. Because it's an XR650L and it is air cooled, I wanted to do something to
protect that oil, keep the temperature down as much as I could. So I used a Sutton Cycleworks
oil cooler, installed it here, installed perfectly, no issues. I did test it and it does work.
And some of you guys are going to say, well, what about that fuel tank? Well,
I opted to keep the stock fuel tank, even though I'm going to be traveling and doing a lot of miles.
Yeah, kick my water all over the place here. And doing a lot of miles,
I want these fins. I want these air scoops. I want as much air as I can get. So that was
my main purpose. And then second to that is the way I ride. I like to be able to get up on the
tank. And I just, I don't like that big, massive, you know, tank. So this works for me. Might not
be for everybody, but works for me. I'm using a Seek Concept seat. During my first 2300 miles
of testing on this bike, I was not happy with the stock seat. You know, I could only last
two or three hundred miles and I had to get off. This one, I'm pretty sure I can ride all day.
Not too bad. Extremely happy with it. Great job, Seek Concepts.
Let's see. As far as the engine, in another previous video, I went over what I did.
I'm using an FMF Q4 pipe. I de-snorkeled the air box
underneath this seat. All you XR650L guys are going to know what I'm talking about.
I installed a Uni foam air filter and de-smogged, pulled all that smog stuff off of it. Don't need
it. And then I, you know, I did a re-jet on it. And I've talked about that re-jet in the other
video. You know, I use 55-158, two turns and two shims. And for you guys that are tuning,
you know exactly what I'm talking about. Works well for me with that, with that setup.
I can't think of, I can't think of anything else. You know, the small little things,
some things that I did note. I put a broad pan on the kickstand. So when you, you know,
getting it in a position where you need to get off the bike and you don't want your kickstand
going down into the mud and rocks and so forth, I put a pad on there. That would help with that,
with that issue. Okay, we'll move on down. The, the tires that I've selected to run,
especially on this trip, it's a long trip. You know, it's estimated 16,000 miles.
So all you guys following that are XR650L guys, we're going to find out.
These are Dunlop D606s. I, I love them. The hookup is great. In my opinion, they work well
on the street. Now, hey, that might be my old road racing days coming back. You know,
they'll slip on you if you push them too hard. But they work, they work great. Extremely pleased
with them off-road. I did, I put rim locks on. The rim locks, easy to install. The hole is
already in the, in the rim. You just got to put a little hole in your, your spoke protector,
front and rear. I did that just in case, you know, if you get a, you get a leak,
a leak in the tube, or you get a flat and you're not quite where you need to be,
I would prefer that tire be locked up to that rim so that I can at least travel,
even at a slower pace without destroying the tire, ripping the tube all to pieces.
I've kept the stock gearing. I'm happy with it. Works well. Highway speeds, no problem.
Torque off-road, no problem. I think, I think that about covers it.
I think what I'll do now is I'm going to get busy and, you know, put the
luggage rack or the luggage on it, all of my, my system, front and rear. And then,
you know, we'll have another look at it. And, you know, you guys can make the decision.
You know, another little thing I bypassed was the temp gauge. Extremely important. I can monitor
what's going on within engine temperature, especially when, you know, I get into the,
to the heat, heat of the desert, that sort of thing. I actually used that and it was very helpful
with the installation, the results of the oil cooler. It does, in fact, work. That oil cooler
works. Any questions? If you guys have any comments, you know, feel free, you know, drop a
line. You can also shoot me an email, rick at maverickmotousa.com, and I'll be happy to answer
any questions or help you out. All right, so I'm going to, I'm going to get busy and start throwing
some luggage on this, on this bike so we can have a look at it. Okay, I'm back. Installed everything
that I'm going to be using. I wanted to show you guys this, this back end. Let me see if I can get
this video going here. The way I have attached the Highlander, you can see right here, I've got
two straps pulling this part of the saddle down to the rack. In the back, right here, those little
clips I was telling you about that I installed, these two straps on the back, that's where I can,
I connect them there. Tighten her down and she's rock solid. Without, without the bag on there,
you can see, you know, this is where the, the main bag goes. I'll throw it up there in a minute.
The, I, this is my, my sleep pad, my tent. I've attached that right straight to the,
the rack and the back side of the saddle. And I'll show you, I'll show you here in a second,
you know, how I, how I get that straight. One of the things I wanted to fill you guys in on,
I didn't show you earlier, I did install a JNS LED headlight. Awesome. Draws less current.
It's bright. A lot of, a lot of schools of thought on that, but for me, that's great. I also installed
a USB charger right here. This charger is great because it, it gives me the voltage
of the battery so I can monitor that. This is shown with my, my GPS installed camera.
So let's see, as far as what I've packed in, I'm not really going to go into that.
You guys, you know, everybody's going to do it different. Everybody has their own methods.
I will say that these two bottle packs in the back, they're fuel. I've got aluminum fuel cans
in there. I carry fuel there. And then on the back right here, I've got a two gallon giant loop
that I'll use when I need it. You don't need it all the time. With that being said, including
a, a bag that I can strap right across here. People are saying, well, hey man, it's going
to block the headlight. Well, when I'm up in Canada and Alaska, I really don't give too much
about that, that headlight, especially the time of the year I'm going. And of course it's only
on there for about 90 miles and I dump the fuel in and it's gone. Just something to think about,
think that through. This is just my methods, not telling anybody what to do. I'm just saying, this
is, these are my methods. Let's see, obviously Tusk tank bag up front. This is where I dropped
on the tubes. These tubes are attached rear tube, front tube. Got a couple of spark plugs in there
and a couple of miscellaneous items, some carburetor tools, that kind of stuff.
But whatever you want, I guess. Let's see. Really, I think that's it. I think what I'm going to do
is I'm going to throw the main bag up there so you guys can have a look at that and kind of see
what's going on with that. Let me, let me put this down. This is how this bad boy goes on.
Sets right up there. It's obviously got straps strapped here. It's got three of them and pulls
it down nice and tight. There again, this is where I'm showing, I'd be having that two gallon bag
just hanging right here. There again, 90 miles, comes off, it's dumped into the tank,
I don't got to worry about it. But if I do need it, which I will, it's there.
One of, one of the, one of the things that I want to show you also is, is down here where I have
attached the Islander bags. What I've done is I've taken it off the frame, brought it back here,
and the reason I did that was to get this more in a vertical and lower position to get some
of the weight down on the side of the bike. And the primary reason that I've done it is
this area right here, I need, I need the space. I need the space on that seat.
It's pretty important, especially when I run with a backpack, I carry a lot of camera gear,
water, food, that sort of thing. But, but yeah, I want you guys to, you know, understand why I did
that that way. I see a lot of guys strapping these things up here, you know, way up in here,
and it's like, there's no room for you to maneuver. When you're out there in a sand pit,
you're going to want to get your, your, your weight, you want to stand up, get your weight to
the back, get on, get towards the back of your seat. If you, you can't do that, then, you know,
it's a problem. All right. And I think that's, I think that's it. You'll get to see it. You'll get
to see this one in action. I'll be out there, well, most likely two to three months. So it'll
be a lot of, a lot of servicing, oil changes, tire changes, a lot of things like that going on,
but you'll, you'll get a firsthand look at it. But what an adventure, right? I don't think I've
really said where I'm heading, but I will let you know that the Arctic Ocean is, that's in the plan.
Mexican border is in the plan, a few other spots, but we'll, we'll take this adventure as it goes
and enjoy it. I'll share it with you. And I hope you guys will like, and subscribe,
follow me. You can follow me on Facebook, Maverick Moto USA, and you can follow me on YouTube,
Maverick Moto USA. By the way, that YouTube channel will be live in approximately a week.
Today's the 4th. So once again, happy 4th, happy 250th. And I hope you guys, you know, liked,
liked what I'm showing you. And you're looking forward to enjoying an adventure with me.
And as I always say, remember, when shift happens, roll with it. Take care now.
