The Fastest Mountain Bike Ever?

RockShades
98 followers
#sport #travel #running #marathon #cycling bicycle #training #race #triathlon #swim #bike #run adventure #inspire
AI Generated·May contain errors
Party at the front, business at the back, or wait, is it the other way around? Either way,
welcome to the Mega Mullet. Yes, a 32-inch front wheel, 29-inch rear wheel bike,
bigger than a conventional mullet, weirder than a conventional mullet, and possibly, quite
possibly, the best thing to happen to mountain biking in a long time. Or is it? Well, stay
tuned as we're going to deep dive on this bike and go for a shred, so stay tuned.
Before we dive any further, then a quick terminology check. Mullet, what does it
mean? Well, generally, it means having a bigger wheel at the front and a smaller wheel at the
rear. In most cases, it's 29, 27.5, smaller being at the back, of course. Manufacturers
ship this kind of configuration fairly commonly on a lot of bikes these days. Smaller sizes,
park bikes, downhill bikes run it quite a lot, and we'll see it in enduro rigs,
but 32 and 29, well, that's almost unheard of, especially on an enduro bike.
We haven't really seen too many Mega Mullets popping up, and full 32s, well,
I've ridden one. They're probably here to stay for the foreseeable, certainly in cross-country
and in gravel, but a gravity-orientated Mega Mullet bike has been a bit of a scarcity.
Nico Mullaly did win Sea Otter Downhill the other day on an Adapted Frameworks,
but that only had about 100 mil travel up front and a pretty slick XC tire on it, so a full-blown
gravity-orientated Mega Mullet we haven't seen until now.
What you're about to see could well be a world's first, a GMBN exclusive, if you like,
because we've gone and created a legit long-travel enduro Mega Mullet. This is a completely custom
Nikolai bike. On the outside, granted, it looks very much like their G1, and that's because it
is. However, this one's been completely and legitimately redone from the ground up to take
the 32-inch front wheel. There's no fiddling the numbers here either, no bodging the angles,
angle sets, drop crowns, or adapting anything in any way on an existing frame. No, this thing
is welded from the ground up to specifications and numbers that I gave them using their expertise to
advise and fill in the gaps in between to create a bike properly designed around long travel and
the big mixed wheel size. It's got 165 mil rear travel on this and a 170 mil up front.
It's got a 64-degree head angle, a 479 reach, and 447 on the chainstays. The frame is entirely
hand-TIG welded with some areas hollow milled using fifth-axis machines. That way, they can
save weight and retain strength at the same time. There's a threaded bottom bracket and
external cable routing for ease and reliability, keeping things simple.
Now onto that front end I've been talking about. We'll start with the forks.
Now, upside-down forks or any kind of fork to take a 32-inch wheel is almost non-existent.
Manitou sorted us right out here. We've got a custom Dorado, which obviously with no cross
brace here has plenty of room to fit the wheel in. The problem there though is that the travel
needs to be reduced to a special amount that these forks aren't normally at, which is
down from 200 mil to 170 mil. Onto the wheels now, and these are courtesy of Reynolds again,
but there's a difference. This is the crux of it. This isn't just a cross-country wheel
shoved on here because, well, that's what's knocking around lots at the moment. No,
these are also a brand new. These are the A32s, the 32-inch version of their new alloy wheels
that they've got out for Enduro. If I was to stick an XC wheel on here and go and hammer
it down the hill later, I would almost certainly break it. Again, a new, stronger Enduro gravity
specific wheel has had to be developed, and that's exactly what we have on here.
The final piece of the puzzle then, gravity-orientated 32-inch tires. Quite the mouthful,
unlike a mouthful of hen's teeth. They're rare as anything, but Maxxis have sorted us right out.
We've got a Dissector, Exo-Protection, MaxxTerra. This isn't just an XC tire, a fast rolling skinny
casing tire. This is a tire that's properly up for the job, and it's also set up tubeless.
You may be realizing now then that making a mega mullet isn't quite as straightforward as you might
think. Before I dive into the riding, how have we got to this place where this is a thing,
and what are its pros and cons? With 32s having crept into the world of cross-country over the
last couple of years and the momentum gaining traction every single day, see what I did there,
it wasn't going to be long until the gravity world took an interest. That time seems to be upon us.
You see, mixed-wheel bikes have actually been around for ages. The idea behind them being that
the smaller rear wheel compared to the front gives better acceleration, increased strength,
and added maneuverability to the bike, whilst that bigger front wheel still gives
better traction and greater rollover capabilities. The theory is then that all of these concepts,
while they still apply to a mega mullet, we've just supersized them. That means
greater grip out front, it means more rollover capability when it gets really chunky,
and it means increased stability when the speeds get really high and it gets rough.
Do we still get those advantages, especially out the back, or are we just getting them in
comparison to a full 32 setup? Surely, the handling has got to be compromised. Actually,
as someone who's ridden a full 32, I can confirm that, yes, one definitely does handle sharper
than the other. Before the stopwatch comes out, we get this thing on track and compare it to a
29er. Let's talk manufacturing complications. You see, to handle the rigors, the forces,
the pressures that are put on these 32-inch parts, well, they've got to be built tough,
really tough. You're already making something bigger than its predecessor, and to make it bigger
means adding more material. More material means more weight. More weight means an overall heavy
bike. I've got some examples for you. A 29-inch Reynolds 309 DH Expert front wheel,
well, that weighs around 955 grams. The 32-inch equivalent weighs approximately
200 to 250 grams more. A Vittoria Mazda 29 by 2.4 trail casing weighs about 1,150 grams.
This 32 by 2.4 weighs 1,170 grams. There are only 20 grams in it.
The Dorado up front. Now, this is the big talking point. To achieve the travel we wanted,
that 170 mil, there are no single crown forks that could achieve this or get us to that magic
number to be a proper gravity-orientated bike. This fork weighs 3,120 grams, so it's no
featherweight. There is a slightly lighter version available at 2,970 grams. Now,
for comparison, a Fox Podium, that only weighs about 300 grams less. The bigger difference
comes if you were to look at a RockShox ZEB or a Fox 38, these are about 500 to 600 grams less.
There's definitely some weight added here, but I'm sure lighter options will be available in
the future. If you were to add up all those weight differences, you've got anything from around
550, 600 grams up to about a kilo in weight difference. Now, obviously, at the heavier end
of the scale, that does, well, add up. That does make a difference to how your bike rides,
how it handles, how it climbs, how it descends. Our main constraint when coming to frame design
and thinking about how this bike was going to be built is bottom out. Now, what I mean by this is
when that fork's fully bottomed out, it's having enough clearance that it doesn't hit on our lower
crown here or on our straight down tube. That axle to crown does change. You see, this is really
tricky on smaller frames, but on this larger frame, to not have a monstrously high stack height,
the head tube had to be reduced, therefore giving a better axle to crown length and therefore
reducing the chance of any fouling when bottoming out. The time has finally come to put tires to
dirt and I've chosen a gem of a place. I'm here at Paganella Bike Park in the Dolomites, Italy,
where I've devised a few experiments, tests, if you like, which, bear in mind, you're going to
have to take with a pinch of salt because, well, there are so many variables on this,
but to set a few benchmarks, I'm also going to do these experiments on my full 29. Now,
bear in mind, obviously, this is real-world testing, experimenting, if you like, not
controlled lab conditions. A bit of leeway is required, but I'm going to do a little
shakedown on the bike first, just get warmed up, and then we're going to look at braking,
acceleration, handling, and doing a full run. It's time to ditch the beanie,
dom the full face, and well, I'll see you in a bit. That is a soggy shakedown done.
I've got a few insights for you, a few first thoughts. Now, having rode a full 32 of a very
different kind of bike, much like that, once them big wheels get turning, it's hard to slow them
down. It does carry pace phenomenally well, especially being a longer travel bike. That
being said, it raises up some setup issues. Where you sit or where it positions you on the bike,
I think you have to alter that slightly, but also, I need to adjust the suspension accordingly
because the front end seems to be sitting quite high. Now, I don't know if that's a bigger wheel
thing or the suspension is sitting a little bit too high in its travel. I'm going to try and drop
a little bit of pressure out there. I noticed the maneuverability is not by any means terrible.
I want to get onto a slightly more technical track or slightly push it harder anyway to find
that out. When you're in the air, just maneuvering it around is actually quite
tricky. It doesn't just turn and whip about as much as if I was on a smaller wheeled mullet,
if you like. Especially that front end, you can really feel the resistance and tipping it over
into turns and stuff like that. That being said, it does ride on the rough stuff very well. It
carries pace. It smooths out the trail. Acceleration-wise, I'm going to really
hammer that in one of my experiments. Let's go try and get cleaned up. Hopefully, the sun is
about to pop out soon. We can only keep our fingers crossed. Have a pizza and catch up in a
bit. Lovely bit of lunch. I gave the bike a quick spruce up. It's now time to do our experiments.
First up, a braking and acceleration then. I found a lovely little segment of track here.
We've come over to the thigh zone of Paganella Bike Park where it's a little gnarlier.
I've had the shakedown. The bike is set up. Like I said, we're going to set some benchmarks on the
Rallon first. This is obviously a full 29er, a bike I'm quite used to. What this should have
a look at is will that acceleration be improved by having the mixed wheels on the other bike?
Will the greater traction aid in braking, being able to get on that front brake harder with a
bigger contact patch? Will it carry speed more? We found in another test I did on the full 32
that it carried so much speed that braking actually took a little bit longer. Well,
there is, of course, only one way to find out. Cue the beeps and let's drop in.
All right, Old Faithful. I love Old Faithful. Will Old Faithful be faster? That's the question.
Or will the new kid on the block stamp some authority? First one done, over to the Mega
Mullet. The benchmark has been set. Mega Mullet, it's coming for it.
Let's see what this thing's all about then. Mixed wheels, the Mega Mullet.
I mean, just looking at the front of it, it is humongous, just like the big 32 I rode,
but how's it going to feel on the trail? Mega Mullet run done and as expected,
flipping out, did it carry speed well? Braking and accelerating, well, we'll have to stay tuned
and wait till the end to find out the times, but thinking about it, why haven't we seen these pop
up sooner in its sort of gravity format? Well, as mentioned earlier in the video,
it is difficult to make something far bigger without weighing a metric ton and still be
strong enough. You see, the problem is it does have to be really strong for what it's being
put through. Because of that, as I said, you've got to add a lot of material potentially. That
therefore adds a lot of weight. As this is mostly at a performance kind of level at the moment,
teams, racers, riders, they're not really willing to sacrifice adding that much weight unless
there is a significant performance gain. There are also geometry restrictions. Now,
this is an enduro bike that with the help of Nikolai and Manasi, we've created and it,
for the best part, works so far so good. If you were to jump up into downhill and run a 32 up
front, well, imagine adding another 30 mil to the front end of this bike. That would slacken the
head angle a lot, not just a little bit, but a lot, raise the bottom bracket. It then poses other
questions of clearance between wheel and downtube, wheel and top of the, or underneath of the crown,
should we say. Now, there are ways around this potentially, which is why in cross-country,
we've seen these crazy drop stems, these negative stems, which keep the front end low enough. Now,
in cross-country, you want to be over the front for climbing a lot more.
Downhill, we are seeing people like Reece Wilson experiment with crazy high front ends,
so maybe it would work, but there is a lot of unknowns there into adding more travel onto the
bike and adapting the geometry to suit. Finally, I've not touched on this one really,
but manufacturing, logistics, spares, traveling, these big wheels don't fit in a normal bike bag,
so how are you going to travel with them? If you're making new frames or if bike manufacturers
are making new frames, especially out of carbon, that's a different mold potentially because of
different angles. Spares, bike shops have to keep more stuff. Tooling, bike shops and race teams,
whatever, are going to need truing stands that take 32-inch wheels. There's so much more to it
that it opens up a whole host of other questions, not just from us as the rider, but as the industry
as a whole. That, therefore, asks the question of just because they can, should they? I'm going to
let you answer that one in the comments below, but whether we see it take off from a racing
standpoint, well, that all comes down to whether or not it's actually fast. If it's faster,
riders will definitely look into using it. On that note, I think it's time for a full run.
Full run time. For this, I've chosen a track called Easy Rider. The track's 1.2 kilometers
long and is a good example of everything where this bigger front wheel should excel in some areas
and potentially suffer in others. It's the perfect enduro track. First up, a base time.
Okay, here we go, straight into our full run then. Now, some of you might be going,
that's not a fair test or fair back-to-back. You ride this bike all the time. Yes, I do. However,
I have ridden this track in terms of I've done some testing on it so that it's not
completely unknown on either bike. I know where I'm going. I've done practice laps on both
to try and keep it as fair as possible. That being said, it's always tricky.
We have to take into consideration other things such as new components, new tires.
I've never ridden those Maxxis tires before, whereas I've ridden these Vittoria
tires 16 trillion times. I know how they handle, but I think once you get to a certain point,
you're pretty good, should we say, at adapting to new things.
Oh, big steps. That gets me every time.
Oh, this is such a gnarly section, more like on any bike. I'm going to have to admit here,
this feels far more balanced than what I think the Mega Mullet will be like at pace.
I think you'd have to spend, or certainly I would, a lot more time getting that Mega Mullet
truly dialed in into a really comfortable place and play with bar height, suspension,
compression, rebound, to get it feeling as it should, because this one does feel
really nice. You got to bear in mind here, people, that that Nikolai is a first version.
Those guys have knocked it out of the park making that for us, whereas this bike has been
developed over God knows how long. Even things like leverage ratios on suspension,
getting the angles dialed, everything takes a long time to fine-tune. It'd be wrong of
me to come out here and just go, oh, it doesn't feel right. All right, the big one, the big
long-timed run. Oh, God, it's so rough already straight in.
Let me know in the comments if you think this is going to be faster than the full 29.
It's not the most agile, I'll give it that. That front end feels mighty high.
I have done plenty of laps, I should say, on this. This isn't a first-run wonder.
Big holes there. It's intriguing to see, I know where I'm going, I'm up to pace,
but this is a rough track. Perfect test ground for this, not just because of the big
mixed wheels, but also because it is a gravity bike, remember. Oh, big holes.
Remember, we haven't really seen these on any gravity-based
challenges yet. No World Cup Downhills, Enduros. Oh, dappled light is horrendous to see in.
Oh, yes. A bit of a kick on that one. Big berms. I know it's in the berms,
it takes more maneuvering. It's a harder workout to get the bike exactly where you want it.
Then I was kicking the back end around, which would be way easier on my normal mullet,
to a 27.5 rear. We're coming into the jumps.
It goes well. I'll talk about jumping in a bit. There's definitely some pros and cons there.
Oh, chunky bit to end on. I forgot about this bit. Across the line.
Wow. What a run. The mega mullet, pretty mega. I've got some things I definitely want to talk
to you about on this one. I need to get my breath back. I need to take this coat off
because it's considerably warmer down here than it is up there. Let's do that and catch up.
Wow, what a couple of days here in Paganella Bike Park. It's been pretty unforgettable and
proper eye-opener riding this brand new mega mullet. Now, I got to say, a big learning curve
here. I'll get to some of that in a minute, but I won't keep you any longer when it comes to the
times. The braking and acceleration portion of the run. Now, this is a section of trail where
there was a lot of hard braking, direction changes, acceleration out of it. Putting that
mixed wheel size, if you like, to the test against the full 29. The times were the Rallon did it in
31 seconds. Not a tiny section of trail, but good enough, whereas the mega mullet did it in 32.
Not much in it at all there. I'm going to put that down to a couple of things. One,
the ease of changing directions on the Rallon was just less. It was simpler. It was easier.
I could throw it about. Riding the mega mullet, it felt like a big cumbersome kind of thing to
maneuver, that bigger front end. It just felt like it required a lot more effort. Yes, it did
carry speed into turns for sure, but slowing it down, it did carry speed very well. Slowing it
down did mean it was slightly more fatiguing. I certainly think that would be a case over a
very long run unless you're pretty fit or used to it. It just goes to show that both very good
bikes. I know they're very different bikes in a way, carbon, aluminum, one set up perfectly,
probably still could do with a bit of a tweak, but very different. Anyway, I waffle on.
The full run, and this is where I think it probably counts a little bit more,
was a certainly different story. I've got times for you here. The Rallon, remember,
a bike I'm very comfortable on, happy to throw it down almost any trail completely blind,
three minutes, 33 seconds. A good solid run that is. Bear in mind, that run down there is
full of rocks, roots, blind crests, jumps, drops, you name it. The mega mullet though,
eight seconds faster, three minutes, 25. I'm going to put that down to a few things. One,
it did carry speed incredibly well. As you can see from some of the clips, there's lots of big
chunky drops, and steps, and root sections, and it hauled it over them. Bear in mind, this is a
bike that I've only ridden for two days. I would say that the suspension isn't quite set up right,
tire pressures, and the actual tires themselves, which I'm going to go onto now. The tires,
the dissectors, great tires on for a trail bike. I did puncture the rear. The eagle-eyed amongst
you may have noticed the back tire, or the back wheel actually, the tire wheel assembly was
different on the full runs. That is because I punctured and put a hole in the back tire. No,
it's exactly the same as the front, just the 29-inch version. What I think this goes to show
is that whilst the tires are there or thereabouts, they're not fully there, which is why
I don't think we're seeing them properly in the gravity world yet.
We've got this trail casing version, and I pushed it way beyond what a trail tire should really do,
but we haven't got a full-on thicker casing downhill tire. Bear in mind, this tire is what,
1170-odd grams if I remember correctly. A downhill tire is going to weigh probably 1.4,
1.5 kilos, really heavy. Wheels absolutely sound, suspension sounds. We'll touch on climbing a
because we did have to climb up the, not up the trail, sorry, but up to the trail.
What I noticed was when it got very steep, the front end did start to go very light and the
steering as well. I think that needs something that's addressing. That's why you are seeing
negative stems a lot in cross-country to try and keep the weight over the front. Something I don't
really think works as well in cross-country and certainly not in downhill, but I may be proven
wrong on that. Overall though, is there scope for this kind of setup in the future?
I wouldn't like to say a definite yes. I think I'd have to be slightly more reserved in my answer,
which is going to annoy some people. I can feel the keyboards lighting up, but I'm going to say
that we're less likely to see them in the gravity world until that tire option and that suspension
range and weight comes down and the, like I said, the tire options get broader. I just don't think
they're quite there yet. We can't all run Dorados on an enduro bike. As amazing as that fork is,
a lot of people won't, and racers especially, won't want to pay the weight penalty.
Adaptation to how you ride, type of tracks, if like our UK tracks, that setup is going to be
real tricky to move that bar down, but it was an item. Thank you hugely to Nikolai, Manasi, Reynolds,
Hayes for bringing this all together, Maxxis tires. Very interesting to put something of the
future to test now, something I'll have to revisit, and maybe should I convert this bike to a full 32
and do something on it in the future? Let me know what you thought, what you think of Mega Mullets
in the comments down below. I'm looking forward to reading these comments. Thank you very much
for watching all from me and Paganella. I'll see you later.
