TITAN FUNDAMENTALS: What is a 1-2-3 Block?
Aug 9, 2026
Learn about one of the standard tools you should have in your shop—the 1-2-3 Block. Stuart explains how to use one in this video.
Revolutionary CNC Education all available for FREE. Learn to become a CNC Machinist or a CNC Programmer through our advanced training Academy, TODAY! Access hundreds of CAD models, prints and video tutorials at the click of a button.
DESIGN, CREATE, REPEAT.
Visit http://academy.titansofcnc.com to get started with your CNC education.
In this video we're going to go over a 1-2-3 block.
It's called the 1-2-3 block because it's precision ground block at exactly one inch by two inch by
three inch. It is a standard that we use in terms of setting up, doing fixturing, touching off tools
because of how accurately it's ground. We have two different blocks. We have
these 1-2-3 blocks which stay out here with the mills. Each mill has its own and then we have
a perfect set in inspection only for calibration and measuring. When we touch off our tools,
normal material actually has a small crown dipped into it. What that means is when we have a puck
and we're setting off our tools, if we have the puck over here or over here, we'll actually get
two different numbers. To make sure everything is perfect and at the exact same plane, we use a
precision ground surface that we know is exactly one inch or three inch or two inch above our
parallels. Once we've touched off our tools, then we can take that number, lower it down,
then take our material, find the exact height, and put it back up to get our top cutting plane.
And that's how we use 1-2-3 blocks to do our setup.

