These two dressers were the grossest I've worked on in a long time, and that's really saying something if you consider some of my recent furniture makeovers! I also nearly walked away from buying them until the seller told me something that I couldn't just ignore! Filthy dirty and smelled like decades of cigarette smoke.
These laminate and wood pieces look nothing like their former selves. In this video, I sand and whitewash the wood parts with a 50/50 mix of water and Fusion Mineral Paint in the colour Casement.
AI Generated·May contain errors
Video Summary
AI Generated
Angie from Transcend Furniture Gallery transforms a pair of filthy, nicotine-stained mid-century dressers into modern treasures. Despite their poor initial condition and strong odor, she restores them using deep cleaning, structural repairs, and a custom sage green and whitewash finish to save them from the landfill.
Oh, I went and did it again, you guys. I swore I was done with the disgusting, smoky dressers,
but somehow I ended up with two more. You are not going to believe this transformation. I
barely believe it, and I did it. Stay tuned. My name is Angie, and I'm the one behind
Transcend Furniture Gallery, a business created from the love of vintage furniture
and the desire to take broken, dated, and unloved things and turn them into modern treasures.
Sometimes I paint, and sometimes I don't, but I always do what I can to save old pieces from the
trash. Welcome to my workroom. Okay, so while I'm getting ready to prep this, let me tell you about
how I ended up with this pair of disgusting mid-century-esque dresser set, probably from
the 70s. I saw these on Marketplace. I wrote the lady right away because I had a feeling about
these. I could just picture what they could be, but I was so disappointed to get there and walk
in the house, and it just smelled so terrible. I was actually going to tell her no. You can
actually see the top of the dresser falling off in my hands here, but before I could decline the
sale, she actually said to me, she said, I'm so relieved. My husband just passed away a couple
of months ago, and I just, I can't bear to look at these anymore. Yeah, so what was I gonna do?
I loaded them in the car and drove all the way home with the windows down, kicking myself,
but I would have felt terrible if I had told her no after she said that. I just, I couldn't do it.
So instead of walking away, I spent two and a half hours outside cleaning these. I got sunburned and
everything, but this Zepp degreaser is fantastic for getting rid of that caked on nicotine and
just grime and dirt. These were absolutely filthy. They were probably the grossest pieces I've had in
quite a while, and if you saw some of my most recent videos, that's really saying something
because those were pretty bad too. I was a bit torn about this hardware. I initially had planned
on spray painting it, but once I scrubbed all the grime off, it was a little bit of patina,
but they were actually in really good shape, so I think I'm gonna leave them as is. And a great
before and after shot of these filthy legs. Like, that is so gross, you guys. You've seen me use
this before. This is a great odor blocking primer. It goes on white but dries completely clear.
I am covering every square inch of this piece with this primer. It looks pretty crazy here,
but it does dry completely clear, don't worry. You can actually see on the right there it's
already started to dry. I'm reattaching the laminate top with some weld bond. It's a great
glue for stuff that's not wood. I use it a fair bit, especially for this situation.
So it goes on a little bit like contact cement. You have to apply the glue to both surfaces
and press them together. It's not as fast as contact cement, like when you lay contact cement
down. You can't usually move it, it just immediately bonds. This one you have a little
bit more working time, so I'm just kind of making sure I get it all lined up, and then I'm going to
clamp it all down and let it dry for the rest of the day. You can never have too many clamps. I'm
just gonna put that out there. I'm using a 100 grit sanding pad to clean off these legs now.
This is that same sort of weird printed plasticky paper product that they put over raw wood back in
the 60s and 70s. I don't know why they did that. I much prefer the look of the raw wood, even if
it's inconsistent and kind of random, but that's what wood is. Like, I don't get these products
that try to make wood look absolutely perfect, because me, that's not how wood is at all. Almost
every one of these drawers had to be reattached in some place and glued and clamped. It took a
little while to get all that done, but everything was strong and bonded again and good to go.
I'm only adding a very tiny amount of glue to the dovetail part, and it's actually just inside. It's
not actually on the tails themselves. This is just... it'll hold it in place, but it won't make it
impossible to take apart later on if there has to be other repairs done. I've seen some pretty bad
repairs over the years where people will glue the heck out of the dovetail joint and you just...
there's no way to get it apart. Or they'll drive nails down through the middle. That drives me
crazy. I don't know why people do that. Stop nailing stuff. So I know on first glance this
dresser, or these dressers, look like really cheap laminate pieces, but they actually have solid wood
frames, solid wood legs, and the drawers are completely solid wood as well. So to me, these are
sort of my ideal project pieces, because the part that is laminate, like the sides and the top, you
can just paint to kind of give it an update, and the rest you can actually leave wood if you want
I like leaving as much wood as possible where I can. Because I am going to be painting these tops,
I'm just giving this a very as uniform as possible scuff coat with... I think I'm using a 150 grit.
All I'm trying to do is knock down the majority of the shiny parts. Now if this top was wood,
I would absolutely prime it, because I would be concerned about some of that residual nicotine
or bleed through, but because these tops are not overly porous and I've already scrubbed the heck
out of it and cleaned them really, really well, I'm not at all worried about that. When in doubt,
always prime. I'm quite confident in this being very clean and properly prepped, so I'm just going
to go ahead and patch my holes and then I'll be painting it. Sometimes I use Bondo to fill holes,
sometimes I use this filler. I like this one because it goes on pink and dries white, so
there's never any confusion about whether or not it's dry. If it's white, you're good to go.
And this is probably my favorite part of the whole project, doing this whitewash. So I'm using
Fusion Mineral Paint. The color is Casement and it's a 50-50 water to paint ratio. I just have
them mixed in a spare jar. You brush it on. You don't want to let it dry. Brush it on and pretty
much immediately wipe it off. One thing to consider when you're whitewashing is that it
will sometimes raise the grain of certain woods and you can kind of tell when you rub your hand
over it if suddenly it feels rough where it was smooth before you did it. If that happens,
just grab a fine sandpaper and just, without a lot of pressure, just knock that down a bit. You'll
see me do that here in a couple of minutes. It doesn't actually hurt the whitewash if you do it
lightly. This is one of my custom mix colors from my color mixing video. If you're interested in
making this color for yourself, I'll put a link in the description box below. Speaking of the
products that I'm using that you're interested in, I do try to link as much as possible in the
descriptions of the video, so always check those out. This looks fairly light here and it does go
on a little bit lighter than it dries, but most of this is just the lighting. It's actually a very
pretty sage green with a little bit, I don't know, it's a little bit lighter than Sacred Sage because
Sacred Sage is one of the ingredients, but there's a little bit of gray in it and it's just a nice
tweak on an already great color. It's just kind of my own version of it. I'm choosing to brush what
you could also use a roller here. So this is what I was talking about earlier, about knocking back
some of that raised wood grain. I'm not using pretty much any downward pressure, I'm just
dragging my hand back and forth and that's all it takes. I'm sealing these drawers with three coats
of water-based Minwax Polycrylic. It's really easy to put on, you just don't want to overwork it, so
I usually just apply it and then drag it all to make it smooth as quickly as possible. If you wait
too long or you go back and forth too many times, you'll just mess up your finish. So get in, get out,
basically. I'm pretty much in the home stretch now, just reattaching the legs and doing a few
last-minute things to the drawers. There were a few of these plastic sliders that were broken,
so I'm just replacing them very quickly. I always keep these on hand, I go through so many of them.
Definitely want to keep them around if you're into redoing furniture.
As is becoming tradition, I just want to take a few minutes to say a huge, huge thank you to
all of these awesome folks who have sent me tees over the last couple of weeks. It's just a really
fun way to help support the channel. You could do anything from five bucks to, well, basically
unlimited, but every little bit helps. While I do occasionally buy a tee, what I normally use this
money for is supplies and just stuff to help keep the business and the channel going and I appreciate
it so much, so thank you, thank you. If you're new to this channel and you're just seeing this
for the first time, I'll drop a link down below if you want to check out what this is all about.
Final step now before the big reveal, I'm using this Wise Owl furniture salve to help seal the
drawers. Just nourishes the wood, protects them, seals them, and leaves a nice light scent.
Hold on to your hats. Let's have a look at these pieces. If I hadn't done this myself,
I would never believe it.