Making Some Renaissance Kirtles Using Only 16th c Sewing Methods

Folk Costumes
72 followers
4 Video Views·Jul 30, 2026
AI Generated·May contain errors
Today is a very exciting day because while I've always loved 16th century dress,
I've never yet had the opportunity to do a reconstruction project in this period.
Until now.
So, let's get into learning and experimenting with 16th century dress.
Beginning, of course, with the foundations.
Which in this case, is the kirtle.
Before we had corsets, before we had stays, before we had bodies even,
and by bodies, I mean the precursor to bodice, not, you know, like human bodies, obviously.
We had kirtles, sometimes referred to as petticoats in the period,
since the skirt and the stiffened bodice are connected.
This was the structural layer worn just over the linen smock,
either underneath the fancier gowns or just on their own.
This project that I'm currently working on calls for two 1560s kirtles,
both of which I will be completely hand stitching in a 16th century method throughout this video.
One will be made of a fancier silk taffeta, which will have a bit more decoration to it,
and a second, plainer kirtle, which will be made from a worsted wool with no extra decor.
The wool kirtle, as will become a theme throughout this video, will be the good child.
As a fabric, especially on shaped garments, it's pretty forgiving to work with,
and in this period, wool cloth would have been woven quite wide,
so my 55 inch wide modern cloth here is perfectly acceptable to work with.
Silk, on the other hand, is a bit more complex in this period,
because the cloth is woven much narrower.
Per my reading, it seems that widths don't exceed 22 inches in the 1560s in Europe,
so the first thing I'll have to do before cutting out the skirt panels
is to trim down my yardage into 22 inch strips.
Why, you might ask, am I cutting my fabric apart just to literally sew it back together
in the same strips to form basically the original width?
It seems like overkill, I know, but using the fabric of the original width
forces us to put seams in that are present in historical garments
that otherwise wouldn't be present in the reconstruction.
Plus, it'll force me to think about fabric usage in a more historical context.
Less width in my fabric means that wider panels like skirts or long gowns
may require several piecings in order to get the desired shapes.
I love getting to experience the decision making process of historical tailors
when I'm faced with these challenges of laying out garments,
deciding where to place cuts and piecings where necessary,
and of course then deciding where to cut those small piecings on the cloth
in the most efficient and fabric-saving manner possible.
You use a lot less fabric this way, and therefore it saves a lot of money by piecing the cloth,
especially since history really just kind of gives us open permission to piece at will,
regardless of grainline or pattern matching, even on the highest class of garments.
These guys really do not care, as long as you are saving precious fabric,
and honestly, I love saving precious fabric too.
The one main downside to modern fabrics having to be cut to width
is that you don't get the benefit of working completely selvedge to selvedge,
which of course you would have if the fabric truly was woven to 22 inch widths,
and this would save a ton of seam finishing,
because you don't have raw edges along the edges of the fabric.
But I'm going to work with as much selvedge as I can get access to.
But this also means that I have to take a moment to trim off all the modern selvedge fluff
so that these selvedges can better mimic the clean selvedges on historical cloth.
And of course, we are not finished with our pre-sewing preparation,
because before we can get to sewing, we're going to need a few more layers.
Some linen of varying weights for linings and interlinings,
but most importantly, we are going to need some buckram for ultimate stiffness.
Kirtles are worn in history before the widespread use of whalebone,
so we once again do not have bodies or stays or corsets yet.
This is our stiffened bust support foundation garment,
and we are achieving that stiffness not through boning, but through stiffened fabric.
Modern buckrams tend to be made with synthetic components,
either in the fabric itself or in the glue,
which can cause a divergence from the stiffness and properties of the historical stuff.
So I'm going to have a go at making my own buckram.
It's really not a very difficult process, and I've always wanted to have a go at it.
It's literally just medium to heavyweight linen,
historically this didn't have to be the best quality linen,
since it was going to be heavily treated and was never going to be seen,
and the whole thing is basted with a hide glue to give it that rigidity.
I'm using the more substantial but still passably historical quality red edge linen,
which I'll also be using in its unglued form as interlining.
Those of you who caught our extremely nerdy deep dive into comparing
all different qualities of linen and trying to find historical quality linens,
you will probably, like me, now understand way too much about the varying properties of
all the different linens available to us, at least in the Europe side of the market.
Only the bodice is going to be treated with all these inter and linings,
and only the front really is going to be treated with the buckram,
but I will need about four concentric layers of buckram for each bodice.
So I think I have measured and glued accordingly.
Spoiler alert, I had not measured and glued accordingly.
I did have to end up piecing one of the bodice panels, but that's fine.
Once dry and sufficiently papery,
the buckram is pressed and I can proceed on to the last bits of cutting.
Because I want the several layers of buckram in these bodice fronts for maximum stiffness,
I will also have to try and avoid any harsh ridges caused by too many
thick layers stacked on top of each other.
Each layer, therefore, is going to be cut slightly smaller than the last.
I did this fully concentrically with each piece being fully smaller on all edges around than the
last, but next time I think I might try experimenting with only doing this to the top edge,
since I think it actually might be beneficial to have maximum stiffness in the peak,
and also to have maximum rigidity for the eyelet holes, at least at the side opening edge.
Only the front half gets this full buckram treatment,
since its function is, of course, primarily bust support.
However, the back panel will still need some little bit of body,
because otherwise a single layer of fabric will just be too weak
to fully connect to the highly stiffened front panel of the kirtle.
So I'm cutting one layer of plain untreated heavy linen to interline both the front and the back.
And, of course, one final layer of nice beautiful fine linen for the lining on both halves.
The interlining layer for the front isn't really going to add anything
in terms of stiffness that the buckram won't already add tenfold,
aside, of course, from stiffening the straps, which would otherwise be unbuckramed.
But its primary function, however, is to give me something to stitch onto
when assembling all the buckram layers.
Otherwise I would have to stitch all these layers of buckram to the fabric itself
in order to get it to stay,
in which case I would have tons of massive structural stitches
showing through the front layer of the fabric,
which the portraiture definitely does not show.
So that is not the technique that they're using.
So after making sure that all of my buckrams sit well within the seam lines
and stacking each concentric layer on top of one another,
I am ready to properly destroy my hands.
Using the heaviest weight linen thread that I have,
I'm going to pad stitch all of these layers together.
This requires pliers and my most industrial strength metal thimble,
since, alas, my leather thimble will simply puncture
if I try to force a needle through four layers of glued fabrics,
which I definitely don't know from personal experience.
But thankfully these stitches can be on the larger side
and don't really have to be pretty,
since none of this will be seen.
Well, except by you,
but I trust that you're not going to tell anyone.
The trick to working with any shaped garment like this
is to work with it in its final form.
Surface area plays a surprisingly significant role
in three-dimensional shapes.
Since each concentric layer of buckram
will technically have a slightly tighter curve
than the one behind it when worn on a curved body,
this curvature should be worked into the layers as I'm sewing.
Otherwise, if sewn flat, the layers would bubble when curved,
since that excess surface area has nowhere else to go but out.
And you can already see in the finished structures
that they are automatically holding out that curve,
since the surface areas are really pinned into place
like that with each stitch.
A bit of heat will rework that glue
to really solidify it into a curved shape,
and this will continue to improve with wear,
since the heat of the body will continue
to mold the shape to the wearer.
Now I can cover over this structural shape
with the outer fabric,
stretching it nicely so that there is no wrinkling or bubbling.
Once again, I'm working with the bodice over a tailor's ham
to keep it in three dimensions,
so I can be sure that the silk follows the concentricity
of the other layers and won't bubble when curved on a body.
This was a lot more forgiving with the wool,
since it has a bit more natural give to it,
so I could really get a nice smooth finish.
The silk is much more rigid,
so if it's not pulled tightly enough, it would bubble,
and if pulled too tightly, I would end up with stress wrinkles.
The back panels get treated in the same way,
only with just the plain interlinings, no buckram.
The actual assembly of the bodice is fairly simple.
Since these kirtles will both have left-hand side openings,
all I really need to do in terms of stitching together
is one side seam and both shoulder seams.
This is done with a tight backstitch
and heavyweight silk thread on both versions
for maximum strength,
since the bodices will be tightly fitted
and will take quite a bit of strain.
Then all of the seam allowances around the edges
are pressed in and secured down with a whipstitch,
catching only the interlining layer
so it doesn't show through to the front.
I'm also doing this to the seam allowance
along the body seam.
I'm not sure if this was done in this period,
since it will be covered over with lining
and I personally haven't seen any extant references
or examples of this.
However, this is definitely something that happens
in staymaking 100 to 200 years later,
so I am purely hypothesizing here
that we are also stitching down the body seam allowances
here in the kirtles.
It really just helps to flatten that seam allowance bulk,
which is especially important
for tight-fitting garments like these.
And to finish everything off nicely,
I can add in the fine linen linings
to cover all of the structural business.
This is attached all around with a much nicer whipstitch.
I'm using a fairly lightweight silk thread
for the silk kirtle
and I'm using a waxed linen thread for the wool kirtle.
Generally in early modern
and really up to 18th century sewing,
it tends to be common practice
to match the thread type to the fabric type.
So if we're working on silks, we're using silk threads.
If we're working on linens or wools,
we're using actually usually probably linen threads
because it's a lot cheaper in this period.
Definitely not in the modern day period,
but you know, we do what we must with reconstruction.
Except of course, if the stitching is going to be seen,
in which case we will use silk.
Once again, I am not sure if this was done historically,
but I'm going off structural instincts here.
But I'm just reinforcing the inside corners
where the straps meet the bodice front
with a couple of buttonhole stitches.
Since the fabric here is quite hard to turn in
and it feels just a bit delicate,
this should just prevent any fraying
or tearing anytime soon.
We do see similar reinforcements at vents
and slits in shirts.
So it's not wildly off base
and I do think it is a perfectly plausible solution
to any juncture that might need some extra reinforcement
that might be at a point of weakness.
Ironing board is currently being occupied
with 15th century things.
So I have made myself a little makeshift ironing board
from my leather cutting board,
some batting and a mock-up.
It's working out fine.
I took a little break here to press the edges in
on approximately eight miles of taffeta strips
because I've decided to add some guards,
which are basically just strips of decorative fabric,
the silk petticoat.
This is something that we see all over
Renaissance gowns and petticoats,
especially in Italy,
which is where our silk petticoated lady is from.
The bodice stripe layout here is taken roughly
from an Italian Renaissance portrait,
which I've been referencing quite a bit for this project.
But unfortunately, I am unable to turn her around.
So the back bodice stripe configuration
is indeed guesswork.
As far as I've seen on extant garments,
bindings and decorations like this
continue to be cut on the straight grain
instead of on the stretchier bias
as we would normally do today.
This is probably for fabric use efficiency
since the bias requires cutting
at the exact 45 degree angle
through an entire good square of material,
which of course you won't be able to use the entirety of,
whereas straight grain strips can be cut zero waste
or just pieced from off cuts if necessary.
It just requires a bit more finagling around tricky curves.
And sometimes if the curve is just too tight
to steam out smoothly,
will just require some easing or pleating in the trim.
But this is seen on extant garments,
so is therefore perfectly acceptable.
And now that all the complicated work is done,
we can get back to the skirts.
Okay, so the first step in putting together the skirts
is I'm just gonna assemble the front and the back pieces.
So I have a bunch of rectangles
and I've got these two shorter with tapered pieces
that will make up the front.
And then three just plain rectangles
that will make up the back.
So I'm just gonna go ahead and stitch
all of these together.
Just use a little running stitch,
probably a combination stitch,
taking a little backstitch every now and then
so that we have a little bit of security.
But long skirt seams like this that take a long time
and don't take a lot of strain
tend to just be running stitched.
That way we save a little bit of time
because we've got a lot of sewing to do.
I have assembled all of my silk panels
to comprise one full front piece and one full back piece,
which I can then stitch together at the side seams.
This whole piecing into front and back panels
was not necessary for the wool
because I was just able to get
the entire front panel and back panel cut out
out of the width of the fabric that I already had.
And we didn't have to do the whole
cutting things into 22 inch panels shenanigans.
And then this side gets a 10 inch opening.
So after seaming all of the skirt panels together,
I now just have to hem off the skirt opening
with a tiny little hem.
I think I've done this right.
And then the skirt is ready for a bottom hem,
which unlike the rest of hems elsewhere,
the bottom hems tend to be on the wider end
to add some weight to the bottom of the garment.
This one, I think,
measures probably around three quarters of an inch.
I did devastatingly read immediately
after finishing this hem
that a lot of gowns and kirtles
are faced with a strip of heavy linen
or wool felt at the hem,
probably to weight them down
and to allow the skirts to hang smoother,
but also to protect the hem from wear
if it drags on the ground.
I am on a slightly tight deadline for this project.
So I did not have the chance to rip it out
and add one in for this go-around,
but I will definitely be redoing that in future
and keeping this in mind for future 16th century endeavors.
And of course,
just to create some visual harmony with the bodice,
I'm just adding some strips of guards
along the hem edge of the silk kirtle.
This is an extremely common decoration on kirtles
all over Europe.
So not just for the Italian ladies,
I know for a fact that at least the English ladies
are also very fond of this particular hem stripe decor.
Time to find out if my maths is correct.
Yes.
That's what I'm nervous about.
No!
Oh my God.
Oh.
The top edge of the skirts are simply overcast
to prevent them from fraying.
I have not come across a definitive way
that the skirt tops were finished in this period,
but once again,
I do know that by the 17th and 18th centuries,
the raw upper edges of the skirts
were simply folded over once,
pleated,
and whipped to the bodices.
So that is what I've decided to do here.
Modern fabrics, however,
are a bit more loosely woven
than the historical fabrics would have been
and are thus too fray-prone to leave raw,
hence the overcasting
just for some lightweight preservation.
And now for the finishing touches.
The bodices will need some eyelet holes
so that they can be laced closed.
These are offset slightly to facilitate spiral lacing,
which is the most common lacing technique
during this period.
I already figured out all the spacing on the mock-up,
so I just get to plagiarize myself here.
And with the bodices completed,
all that's left to do is attach the skirts.
So this juncture where the skirt seam ends
and splits open into the top of the skirt
where, you know, you enter and exit the garment here,
this is a really vulnerable point
because despite the fact
that this is backstitched a couple of times,
there's gonna be a lot of pulling here
and it's just gonna make this a little bit quite weak
as you can probably already see
the seam threads are stretching a little bit there.
So what I'm gonna do is reinforce this a bit
with a worked bar.
This is basically just a strip of thread
that's gonna be reinforced across
with some buttonhole stitches
and this will just help to make it,
not only the thread itself really strong,
but just kind of give it a little point
so that this thread catches
before the actual seam threads start.
And this is something that was often done
in various periods of history
to help strengthen any splits and seams that happen.
For example, at necklines, on sleeves,
at skirts, vents, in garments.
So this is just gonna get buttonhole stitched
all the way across.
We're effectively just tying a bunch of knots
across this strip of thread.
It's just gonna make it nice and strong.
At least a hundred hours of stitching later,
let's have a look at the final result.
These two kirtles are the beginning
of what will become a much larger project
I have got myself very roped into
on the subject of 16th century women in alchemy.
There will be a lot more to come on this
from reconstructing how women practicing alchemy
in the 16th century would have dressed
to reconstructing some historical alchemy itself.
So be sure to subscribe
if you wish to follow along on this.
The Lady in Silk is modeled off
of Italian alchemist, Isabella Cortese,
a woman of much mystery who,
and I cannot emphasize this enough,
has truly become Blorbo from my Renaissance.
And I am in so deep at this point,
truly obsessed with her and her role
as an early modern scientist
in what we've believed to be
such a male dominated field.
And I cannot wait to bring you guys along
on my quest to resurrect her
after a fashion, of course.
But I have got lots more sewing to do
in the meantime before
we can truly bring her to life.
So I am going to get back to work
and I look forward to seeing you back here.
Anon.
Who's watching me?
What, you've never seen a tutor before?
