Can I Make The Ferrari Scream? - Ferrari Engined Alfa 105 Alfarrari Build Part 239

Tech Care
3 followers
Jul 30, 2026
AI Generated·May contain errors
Hey guys welcome back to Home Built and last week you saw me start building this
bundle of snakes which is the header for the driver side of our Ferrari.
We need to build a passenger side version.
Now you guys know that I have been using 3D printing in my builds for quite some time now.
I actually started with a Creality Ender 5 many many years ago and when I started
those 3D printers were a hobby. You could get a good print out of it but it took a little bit
of finessing a little bit of tweaking and a bit of work and dedication to actually get things to
work exactly the way you wanted it to. I've also used the Creality Falcon 2 laser. 3D printers have
come a long way. This is the latest thing they have just sent me through which is the K2 Pro
3D printer and this is really really impressing me. As you know I've done lots of 3D printing
and it's really useful in all of my builds. So I am changing the clutch in Harry my 911 and I don't
have a clutch alignment tool so I'm just going to make one. So I've gone over to Fusion 360
and I'm creating a spur gear with all the right dimensions so that it will actually fit which I
just measured. I create a 60mm high spur gear, draw another circle on the top which I extend out
and put a fillet on that and there is my tool. So it's designed up in CAD and then I just click
3D print and send it to the 3D printer. From there it's really simple I just open Creality print,
I add my file, all I go through is some of the options to work out whether I need support or
in this case I'm going to add a brim all the way around it just to make sure it doesn't topple
over because it is quite tall. Then I slice it, it will tell me exactly how much filament I need,
how much it's going to cost and how long it's going to take. Hit send print and I come back
in an hour and 33 minutes and it's done. Now this is nice and a decent fit and that is the
exact right size to center the clutch disc. I love having 3D printers it just makes life
so much easier for some of these simple things I can just dream it up and make it. The K2 Pro
here is actually currently 3D printing the mock-up runners that I'm using in the upcoming
videos. Leveling up from a lot of the other 3D printers I've used this has a 300 by 300 by 300
printing bed and as opposed to that old endo5 I had where you had to sort of slide a piece of
paper under and try and level the bed and get everything nice and even so that everything
printed nice this does it all for you it is so easy it's uh just out of the box took me uh
probably half an hour to unbox it and set it up and then you just basically hit print and it does
the rest. The K2 Pro combo you get the uh the CFS which can set up and actually use four different
colors and Creality also want me to introduce their upcoming K3 printer with their Kleetech
technology. There's no full extruder swap just the nozzle which is lighter and does faster color
changes with near zero waste. They've also solved TPU printing jams with a new push and pull
technology. This is such a handy tool for the garage it's no longer a hobby this is a tool
head down link in the description for the Creality K2 Pro and like always just help out the guys that
help out the channel. Alright guys welcome back and if you were watching last week or the last
couple of weeks actually you will have seen that I've spent that time developing and building these
new headers for the Alfa Rari. Now I've never been happy with how the Alfa Rari sounds it goes
fantastically well uh there is far more power than I need in this little car
but uh it's not sounding like the Ferrari that it should so this is what it currently
and this is what it should sound
a Ferrari 360 should really have this high pitch scream that it does not have and a lot of that
I believe comes down to the headers now the back end of the exhaust as I mentioned will be done
later and that's something I can easily swap things out and swap things in and change things around
that's really easy to do the headers is the really difficult part and the issue that I currently have
is that these headers have very unequal length headers the furthest runner is very long the
closest runner is very short and that means that the pulses when they get to the back of the car
are all mixed up and it currently sounds a bit like a four cylinder and that's not what I'm going
for now this is equal length and stepped this header so uh this is not how it lines up they're
all twisted around because I actually have um slip fit connectors in it I've got slip fit in the uh
the collector itself and then each runner is in two pieces that is so that I can get it into the
car so uh only the very first pieces will be connected to the engine and bolted on then the
engine can be loaded into the car with the initial pieces on then I can slide in the second halves
and then slide on the uh 401 collector and uh and connect it all up with some springs etc just so
that it doesn't come apart and then connect the rest of the exhaust that's the plan so we have a
start and this currently is roughly what I'm after now it is not the exact design and I'm gonna gonna
change because it's gonna need some modification when it gets in the car that said it is absolutely
freezing here in the garage windchill is currently minus one and it's 11 in the morning uh yesterday
it was minus five uh windchill it is just so cold here I need to do something about some sort of
heater situation so that I'm not just freezing to death I had this mushroom heater that I've used in
the past but it lives outside most of the year and it's sort of blown over in the wind and it's
snapped off all its fittings so my first job today is to fix this so that I'm not freezing to death
this has been used and abused for many years but the first thing I need to do is remove some of
these rusted bolts thankfully they're all undid quite easily and I'm just using some galvanized
strapping and folding up some little angle brackets that I can then bolt on now this is sitting in
place I am welding on the galvanized pieces now it is not a good idea to weld galvanized steel
but I'm doing it anyway it releases toxic gases so make sure you're in a well ventilated area
oh thaw out my hands oh now I can actually be warm in this garage now there may be garage updates
to come that may make all of this uh much less of an issue but uh there's still a little way
off from that and uh I will let you know when we have some more uh something a bit more concrete
but uh updates are coming but for now I'm not gonna be freezing and I can actually get some
work done without sitting here and just just shaking away while I'm trying to cut accurate
let's get back to the headers so this is where we left off last week I had 3d printed three of
the runners and mocked up in space where my collector needs to be so that it'll actually be
the correct place I hope when it goes into the engine bay I have got the fourth runner fresh
off of the 3d printer so we're going to uh mock this up now and see if it still aligns with
everything else we've got here it should so I was pretty happy with the location of this
header with three runners adding the fourth one I'm just doing some final reinforcements and
I am quite happy the location is going to work that all now lines up the way it's supposed to
I'm happy with my mock-up so now I can remove the plastic and start building my real steel headers
for the passenger side so the first thing I'm doing is I'm cutting off some small sections
of straight pipe to fit inside of the flanges that are actually going to bolt to the head
of the Ferrari engine and as you can see here they need a tiny little bit of finessing because
the flanges are oval whereas the pipe is obviously round so I am using a combination
of sort of tapping it with a hammer and squeezing in the vice to get them the correct shape
then I can start building the first runner so using the jigs that I made up a couple of weeks
ago I am starting to mark out the doughnuts and cutting them a piece at a time I did briefly try
to use these jigs that I made up in the bandsaw but the trouble is it's hard to clamp them strong
enough so that they don't jump in the bandsaw and it's much easier to actually do it by hand
with the angle grinder once I've got a nice clear line I can actually cut a very straight line with
the angle grinder the bandsaw is what I'm using for all the straight bits so by designing these
in 3d space I've actually worked out every straight and every angle and all of the lengths
and angles that I need and I'm going through and just cutting them out just copying down what I've
already written out for myself and making one piece at a time mark the angle cut it off go over
to the linisher and make sure it is nice and flat clean out any burrs and then tape it to the next
piece all right first runner is all together everything except for the slip joint that's
going to go in the middle here somewhere so we can add that and then we can weld it all together
so as I mentioned I am making each of these runners in two pieces because of how tight the
engine is in the car it's the only way I could work out to make it actually be able to fit this
is such a tight space that we're working with that it is amazing that anything fits at all and
I'm very grateful to Charb at Soleratec to work out that it was even possible and here you can
see now that I've got everything lining up the way I want it to I'm going through and I am tacking
all of the pieces together using the world class TIG the main struggle I found was I could get a
super tight fit up on one side but as soon as I welded it it would flex the opposite side open
and I'd have to try and hold some tension on the piece to hold that gap closed and I also needed a
filler rod and I don't have enough hands and that's where it gets difficult I would then resort to
propping up some filler rod next to the gap or even using some tape to hold the filler rod
in place so that I could sort of roughly melt it in there just to get my tack to take
okay so we have the first runner all completed now it's looking really really nice I'm very happy
with that fit up so one down three more to go and while we're here I just want to mention a
little bit about rifling order so I've mentioned it in the past and it's only a theory as to whether
it actually makes much of a difference talking to Charb at Soleratec his opinion is it makes
very little difference but it's hard to compare unless you actually go back to back apples with
apples exactly the same things there are so many factors that make the sound of what the exhaust is
that the rifling order is only one potential thing he did mention that he did some headers for someone
with race boats years ago and they had rifling order and non-rifling order and they said there
was a sound difference so in this case on this bank the firing order goes 8-6-5-7 8-6-5-7
so I've got my firing order going here is 8-6-5-7 so it is going around in a circle 8-6-5-7
8-6-5-7 what I mean is if I got if I switched around these two eight and six for example
and that was eight so we got eight six and then five and then seven it would cross over and it
wouldn't get that rifling order now again they're different pulses and there is no
affinity proof but the main reason I'm doing it is because I can so I may as well do that
and do everything I can to get it working right doesn't mean it's correct an example that Charb
that the BMW M5 V10 does have rifling order but the Carrera GT which is arguably one of the best
sounding road cars ever doesn't have rifling order so that may be myth busted anyway but
we can do it so let's do it there are so many factors that contribute to the sound of an exhaust
so you have obviously the headers and whether they're four to one headers or four into two
into one headers which is actually what the original 360 is and you've also got the length
of each runner and then you've got the rest of the exhaust and there are so many different ways
to do all of this now that brings me to why I think the headers have made such a big difference
to the sound of my engine and I think the unequal length is a big part I'm not really
thinking about the pitch in this case as much as the the rhythm is out it is not a smooth even
rhythm because the pulses are not reaching the tip of the exhaust in an equal amount of time
there are a few that are mixing in together and that is making a big difference to the sound
later on I am going to get stuck in and start playing with the back end of the exhaust and I
can do lots of things there that is relatively easy to pull apart and to just experiment with
different mufflers and megaphones and whatever else you can think of I can try all of that I
can try bigger exhaust pipes smaller exhausts blending them together leaving them separate
all of these things can all be experimented with and that is easy to do afterwards but I need the
headers to at least get a decent base to start with and if you're following my progress here
you can see that as I start taping the pieces together I sit them next to the 3d print so that
I can see if the angles are correct and they are sitting in the same shape as they were designed
and then I can start tacking everything together and making sure it will hopefully be a pretty
close fit when I actually get it into the car and it's about now I give up on my bandsaw the blade
is so far gone I actually ordered one a couple of weeks ago but I'm still waiting for it to come in
so I am just resorting to the old cable tie around the tube to try and get a nice straight
line and then cut it out with the angle grinder and then just tidying it up on the linisher
and we're most of the way through now we're working on the final runner and I have glossed
over most of this this week because this was many many days of work it is all very very repetitive
but it's quite enjoyable to just sort of sit here and listen to podcasts and tinker away
a bit like doing a jigsaw puzzle where you can just sort of switch off all right so I've connected
up the last header and this one does not look like the plastic mock-up and I built everything
to spec to the measurements and then I realized that in the CAD design this arc here I hadn't
dimensioned so basically this curve here I'd gotten wrong and I hadn't dimensioned it so
the radius of this was double so basically this was working as if it was coming out of a donut
that's sort of this size rather than one that's this size so I've gone through redimension so
I'm gonna have to cut these off and do them again and we'll see if we can get this all to fit up
exactly the way it's supposed to so some people have mentioned that I could have 3d printed some
jigs so basically a negative jig that I could then sit all the pieces into and then weld them
together the main issue with doing that is hey it would have to be really big if there'd be a lot of
very big prints and as soon as you start to weld anything it's all going to melt and make a big
mess and I knew that these were not going to be exact anyway so when I get them in the car
there's going to be places they're going to get modified and that means that as long as we get
them close to start with we can then work from there and tackle one runner at a time and make
sure they all fit so header number two is built that is the entire thing and it's looking pretty
good now this long runner I ended up using the the step as the slip joint so this larger tube
comes over by quite a bit I have drawn a line around here so when I do pull it apart I might
actually tack on a collar around here so that it can't slip any further so it does go to a level
and stop because obviously I don't want it to come loose out of this collector over driving it
and then vibrate down and then it's just a big loose horrible mess now I need a slip joint on
this runner here right uh right here probably is where I'm going to put that one and I need
another slip joint on the back runners here as well but I don't have enough slip joints left I
have one more slip joint available so off camera I removed this runner and actually slid a little
collar on and I'm now going to tack that into place so now that is a good slip joint for that
connector it's then now pulling apart the runner I do have a slip fit connector for and then
adjusting that to make it fit now as I mentioned previously I also don't like the fit of the
runners into the four into one collector the four into one collector was an off the shelf item and
they're a bit loose so I think I'm going to have to go to an exhaust shop and see if I can get them
to make me up something a little bit tighter fit with a better expansion tool well this was
definitely a lot of repetitive work and like I mentioned I still need to put in one more slip
joint that's going to be right here on this header but we have both headers completely mocked up
ready to trial fit into the car so the headers are looking really good I think uh it's very
repetitive stuff it's the same thing over and over again just building these things
but it's very time consuming there are so many pieces here that each one has to be cut perfectly
and and be perfectly square and flat even and then join up and then make sure they're all
tweaked at the exact right angle so there is so much work in that but I think uh I think it's
looking pretty good I think the next step is we need to uh do a couple more alterations like change
over the flanges and uh that slip joint and a couple little things but uh I think uh the next
thing is to get the engine out of the Ferrari and we can actually start trial fitting them and
actually see if any of this is going to work so uh hopefully you're there for that but uh I think
that means it's time for fun facts with Mrs Jeff. Hey guys in Maranello on the 23rd of May 2018
Ferrari unveiled its latest offering in its one-off program the SP38. The SP38 is built on
the 488 GTB platform and still runs a 3.9 litre twin turbo V8. The body is a one-off carbon fibre
creation that concentrates its visual mass over the rear wheels. It has insert headlights designed
to be as thin as possible and at the rear the engine cover is distinct with three transverse
slats. The owner who is one of Ferrari's best customers took the Ferrari for a few laps on the
Fiorano circuit straight after receiving the keys. Well I have both headers now mocked up I'm very
happy with the progress um hopefully we can get those slip joints uh the last slip joints sort of
sorted out and there's a couple little tweaks I want to do but uh I think next job is to be
tearing the engine out of the Ferrari and seeing if they actually fit. So this is where we uh really
get stuck in and see if it actually worked. It's almost like a drinking game where people
take a shot every time you remove an engine. There'll be some very drunk viewers. It just
seems like we're always taking engines out and seeing if they fit back in so it doesn't go.
Please like and subscribe if you haven't and of course let Jeff know what you think of the videos
and if you want to help him out with the engine removal and putting it back in again. Yeah
physically you can just just help me. Send positive thoughts but also Patreon if you want
to help him out and see videos a day early. Alright guys. Bye guys. See ya. Hey guys the
Maranello on the 23rd of May. Maranello. Ferrari unveiled its latest offering in its one-off
No. The SV and still runs the 3.9 litre
turbo V8 on the GTB 488 platform and still runs that concentrates its visual rear
