Enter Your Project into The '26 EC Buildoff and win big 👉🏻https://www.essentialcraftsman.com/bu... An example of a blacksmithing project that you can do with less than $100 of tools and a little creativity. There are a lot of projects you can do with this same collection of tools. Fair Warning: completing this project may ignite a furious search for more tools.
Enjoy EC? Join Essential Craftsman Academy! https://essentialcraftsman.com/academy This is the best way to support Essential Craftsman and you get a LOT of perks as a bonus!
AI Generated·May contain errors
Video Summary
AI Generated
This video demonstrates that blacksmithing is accessible to beginners without the need for expensive equipment. By creating a simple marshmallow roasting stick using basic tools like a cutting torch, a small anvil, and a hammer, the presenter proves that one can start the craft with a minimal budget and a few essential items.
So a lot of people are interested in blacksmithing, but are discouraged because they think it takes
tens of thousands of dollars worth of equipment. And it's nice to have the equipment, but you don't
have to have the equipment. You can start into this craft with just the barest minimum of tools.
And so to back up that assertion, I'm going to make what is really, for me, one of my favorite
entry-level projects for someone who's thinking of starting into blacksmithing, a marshmallow
roasting stick. And I'm going to make it with just bare bones, basic, basic tools. Now, I could use
this map gas. I could use this little gas bottle, a plumber's gas bottle, but I'm not going to. It's
too slow, and I think the yellow jackets have been building a nest in there, and it doesn't work,
and so I'm not using that. But you could. I'm going to use a cutting torch. All you need is
some sort of heat source. If push comes to shove, you can get iron hot enough to forge in a wood
campfire. It's kind of slow and tedious and smoky and messy, but you could do it. So anyhow, a heat
source, something to use as an anvil. I've got this little piece of railroad track anvil I've put on
here. It doesn't have to be this sophisticated. It can just be a block. It can be a big wrench
clamped in a vise. It can be the top of a post vise. You need something to smite the steel with.
I'm going to use this little one-pound ball-peen hammer. You need something to hold the steel with
at some point. Now a lot of this time, I'm going to be holding it in my hand, but a vise grip or a
pair of pliers, a pair of channel locks, makes a perfectly suitable tong. Aha! Nice!
Okay, so I'm going to use this little post vise next. You don't have to have a post vise. You may
not have a post vise. You may never have a post vise. Anything that will grab the material and
hold it securely will work just fine when you're twisting small sections of steel.
That's an example of a yin-yang twist. Now we're just going to put sort of a couple of
simple twists on it. Actually, we may stop there. Yeah, this is an example of less is more
and knowing when to quit. There's a blacksmith here in this part of the country up around Eugene.
His name is Dave Thompson. He's a wonderful smith. He has a fabulous artistic sense.
And he had a cliche that I heard him say a couple times, and I didn't understand it until about
five years into this craft. He said, move the metal until the metal moves you. And I thought,
what? You know, and so now riddles are part of blacksmithing. And then one day it just dawned
on me. You can be working along. You can be twisting. You can be drawing out. And at a
certain point, if you're paying attention, you're just going to think, whoa, whoa, whoa, that's
enough. Don't hit that thing even one more time. That's the place to stop. And I think that's where
we're at right here. I'm going to chamfer that edge cold. I'm going to cool this off because
it's starting to burn my hand. All you're doing is just breaking the corner a little bit, giving
the light a place to reflect off the corner. You can go ahead and texture the whole thing if you
wanted, but it's a marshmallow roasting stick. You've got to know when to stop on these things.
So the last step with ironwork is the finish. About nine times out of 10, it seems like I just
use a hot wax finish. But I've got to scale the whole thing first so it all has the same
sort of scaled patina on there. And then we'll wax it. It'll be looking good.
Johnson's paste wax is what I use for a hot wax finish for an indoor application.
You just get it hot, let it cool down to, you know, 400 or 500 degrees. This is a little too
hot, but that's all right. It's going to get hotter when my grandkids use it for a roasting marshmallow.
Just paint that on there, and when it sets up, buff it up a little bit if you want.
And there you have it. Marshmallow roasting stick out of quarter-inch cold rolled with a yin-yang
twist. Where are you going to go to get something like that? You don't have to have a million
dollars worth of tools to do blacksmithing work. I've got about a hundred dollars worth of tools
here, maybe less. A little railroad iron anvil, propane map gas torch, little bitty ball-peen
hammer, a pair of vise grips, and a coffee can full of water. With that and any kind of an old
vise, you can make a really cool marshmallow roasting stick in a short period of time.
To learn how to do this, click the link. Check out my channel.