Building a Tropical Jungle Vivarium with a Waterfall & Stream

Mini World Craft
6 followers
AI Generated·May contain errors
Let's make this jungle paradise Bavarium with a waterfall and stream.
If you're new here, welcome! We make Bavariums, self-sustaining ecosystems home to plants and
animals. They make great enclosures for pets like reptiles and amphibians.
Today we're building a tropical rainforest Bavarium. We'll show you our process from
hardscape to planting and give you all of our tips and tricks along the way.
Then we'll show you what it'll look like after two months of evolution and growth.
If you have any questions, be sure to leave them in the comments.
All right, let's go!
Here's the tank we'll use. It's an Edvinci Takedown 18x18x24. This tank ships flat and
arrives disassembled, which is huge if you're like us and can't find big tanks for sale near
you at your local pet store. But you do have to put it together yourself. You can choose
between glass walls and acrylic walls. Since we're covering the walls anyway,
we went with acrylic. It is much lighter. This is also going to let us cut hidden access openings.
If you're interested in this tank or in any of our other materials,
you'll find them all linked in the description below.
The first thing we did is black out the walls of the tank. This makes sure that
no excess light will sneak through the cracks in our hardscape later on. It will make all
of our shadows look deep, dark, and mysterious. We hit the outside walls with a few coats of
black spray paint and then a few coats of gray. Inside the tank, the walls are black,
but the gray is going to ensure that the walls still match the rest of the tank
when you view it from the outside. We want this tank to have an awesome
waterfall in this back left corner. The first thing we're going to do is cut a hole back there
so that we can access the waterfall pump from the outside. We use a sharpie to trace out the
outline of our access port. Then we use a utility knife to cut a hole along our sharpie lines and
break the piece free. Now we can slide our newly cut back wall into place. This hole should make
it super easy for us to access the waterfall pump and replace it if it ever breaks down.
Since this tank arrived disassembled, we should take some steps to make sure the water doesn't
leak. We're going in with our black aquarium safe silicone and applying it to all the inside seams.
Then we just smooth it out with our finger. Take your time with this and try not to leave any gaps.
Someone probably could have done a better job since we did find a small drip later on that
we had to plug. Sorry.
While that dries, we can start the waterfall compartment. This is going to separate the
pump area from the rest of the tank and make sure no critters can get in. We're using this
small aquarium pump. We place it in the back corner by the hole we cut earlier and use it
to measure out the rough size of our waterfall compartment. Now we mark the outline of our
compartment into some corrugated plastic sheeting. We're making a trifold design.
We cut the sheet with a utility knife and score along our vertical line. Once scored,
they can fold freely like so. Now we can make our box shape all in one piece.
We checked the general fit in our tank and then cut out a small hole at the bottom so that water
from our drainage layer can freely flow into the filter area. Our waterfall compartment also needs
a lid, so we cut out a square plastic and made a hole in it big enough for our aquarium tubing to
fit through. The waterfall will start from on top of the lid. Now let's put it all together.
Using our black aquarium safe silicone, we attach the compartment into the tank on all sides.
Then we add the lid on top. It may not be the prettiest, but all of this will be hidden later.
To stop our aquarium pump from sucking up debris and getting clogged, we add a piece of aquarium
sponge over the hole that we cut at the bottom. Now water can move freely, but things like dirt
or sand are going to be kept out of our pump. Now that we've got something to move water around,
let's talk about moving air. It's easy for tanks to get stagnant and not enough circulation.
This can lead to plants dying and mold growing. To promote air circulation, we're going to be
making a fan-powered ventilation system. This is the key. It's a PC fan. They can tolerate
high humidity and they can basically run 24-7. Kind of like with our waterfall box,
we built a box out of our plastic to contain the fan. It's in the shape of an upside-down T.
The fan sits at the top and pulls air in, then pushes it down and out the two vents at the
First, the bottom. A rectangular box with a hole cut on either side for the air to flow out of.
We've covered the holes with window screen mesh to stop critters from crawling in.
Next is the middle section. This simple box joins our bottom outflow vents to the top intake vent.
Our top section is large enough to hold the fan and has a large hole to suck air through.
We siliconed each of our sections together. When we make our ventilation boxes, we like to use
black aquarium sponge as a removable lid so that we can access the fan in the future. If this all
seems a little complex, don't worry. We've got a whole video on ventilation that you can watch
right here. The important part is that we put a PC fan in a box so that it can blow air around
our tank. See that string of silicone moving in the breeze? Now that we've got all our compartments
done, it's on to the fun part. Actually scaping the tank. Let's start with the waterfall. We stick
our aquarium tubing through the lid of the waterfall compartment and connect to our pump,
which we can access easily through the back of the tank right here. We want our waterfall to cascade
down a series of platforms. You can build the waterfall with just stone or wood, but we are
going to build some scaffolding out of plastic first just to give us some more control over the
flow. We're gluing in irregularly shaped pieces of plastic along our waterfall. To keep the water
flowing, each one needs to get progressively larger. We're reinforcing these pieces with our extra
strong hot glue. Remember that all our materials are linked below in the description if you'd like
to follow along. Using our affiliate links is an easy way for you guys to help support the channel.
With our platforms glued in place, we just trim them with some scissors to get the shape we're
after. We end with a flat ramp that leads us down to the bottom where our river is going to be.
We're going to add texture to this ramp later. Then we glue the aquarium tubing down to spray
the water in the correct direction. With the skeleton of our waterfall sketched out, we can
start adding some hardscape to the tank. Hardscape is like the bones of your tank. It's things like
stones and sticks that will eventually get covered in plants. It's also our chance to make sure that
there's lots of climbing surfaces and places for animals to hang out or hide. We knew we wanted
this to feel like a slice of a dense jungle, so we want the core of this to be made up of
crisscrossing cork branches. We tried out a few to experiment with placement and see what we liked.
Then we had the idea to add some ghost wood growing down over the waterfall like roots.
We tried a few out and then found one that really felt like it fit in with the waterfall.
We glued it in place with just a few dabs of our extra strong hot glue.
We'll really seal it in later with some spray foam. We liked that high cork log we had earlier,
so we added that back in. This could be a really fun basking area up by the lights and the fan
intake where the humidity will be a lot lower. Before this tank gets too filled with sticks,
let's go in and add some pots to the walls here and there. We can fill these in with soil later
and they'll mimic the nutrient deposits that you'll find in the jungle canopy. Somewhere epiphytes
like ferns will be really happy. Back to logs. These big cork logs are going to act as extra
platforms in the tank, adding to the usable surface area that critters can hang out on.
Don't be afraid to prop things up temporarily while your glue dries. We're going to use some
cardboard boxes to keep this log up. Keeping with the idea of roots growing downwards over things,
we added another ghost wood piece entangling this log. We could stop here and it would be a great
tank, but we want to really make it feel jungly, so we're going to add another cork branch right
across the tank. Honestly, at this stage, this felt a little too crowded and messy, but trust
the process. It was definitely the right call in the long run. And voila, our hardscape is officially
done. Next up is the drainage layer. This is a layer at the bottom of the tank that sits beneath
the soil. It's where the excess water will sit. We're using aquarium sponge for our drainage
layer. Since we want a small stream, we're going to cut our sponge into two pieces with a swiggly
gap between them for the stream to flow through. We can use the same method to make a pool if we
wanted to. Now that we've got our hardscape in place and our water features sketched out,
we can reinforce everything with expanding foam. This is my least favorite part, but I like it a
lot. We're using black pond and stone expanding foam. It's pet safe and looks a lot like lava
rock when it's dried. We shake it up very thoroughly and then get to spraying. We use
it to blend the edges of the river so there isn't an abrupt bank. We also use it to build up the
sides of the waterfall so that the water will flow exactly where we want it to. And finally,
we use it to seal in and reinforce all of our hardscape so that it's supported and bonded
strongly to the walls. Here's what it looks like after the foam has had a few hours to expand.
See what's puffy and shiny? We want to carve away the exterior and expose the rough,
matte texture of the foam. This is also going to give us a lot more control over the shape of the
foam. It's only been four hours, so the foam is still soft enough to peel with our fingers.
You can also use a sharp knife to carve the foam. This part is fun and satisfying. I absolutely love
it. Once we're done peeling and carving, we can test out our waterfall. The flow wasn't perfect,
so we adjusted it slightly. Awesome. It's a little strong, but the moss and plants later on will
really help diffuse it. Now let's move on to that 3D background. We're making the background out of
chunks of carbonized cork. These are heat treated pieces of cork that look really good and make for
an amazing growing medium for epiphytic and climbing plants. We get them from Zorro. They
arrive in these big sheets, and we break them up by hand to use. We silicone them straight to the
wall until the whole wall is covered. We start with bigger pieces, then use the smaller ones
to fill in the gaps. In addition to texturing the walls, we texture the foam with silicone
and substrate. We liberally apply our black aquarium silicone to the exposed foam and
smear it around. Then we cover the wet silicone with cork and some of our soil. The carbonized
cork near the waterfall is going to wick moisture really well and provide the perfect place for moss
to grow. This step is where the tank really starts looking good. The cork walls have such an awesome
natural texture, and here is the finished background. Look how the waterfall is glowing now.
Around the waterfall, everything is going to of course be super humid, but to help the walls on
the rest of the tank retain extra moisture, we're going to add some damp sphagnum moss.
We're stuffing it between the cracks and crevices in our carbonized cork mosaic.
Now we'll add our soil on top of the drainage layer. Our substrate is a mix of coco fiber,
sphagnum moss, aqua soil, orchid bark, and charcoal. This mix gives us soil that retains
moisture, has nutrients, and won't compact over time. We aren't going to have many large plants
in here, so we're going light on the soil. Only one to two inches of depth in most spots.
With the soil, it looks like our cleanup crew has already managed to start sneaking in.
We're using springtails and isopods in this tank. These guys live in the soil and logs and
break down animal waste, extra food, mold, and decaying plant matter and turn it into nutrient
rich soil that the plants can use to grow. They are essential to any bioactive vivarium.
With our soil added, we can start adding plants. Let's start with this fern.
Good luck. It's like a Harry Potter spell. Dryopteris erythrosora. Nice.
Or the autumn fern. You'll see why it's called that later. We're adding our autumn ferns around
the tank, starting with the pots we glued to the walls earlier. Then we're just going to sprinkle
soil around them. We're using only small sized plants so that this tank feels really big.
Next up, we're adding lots of little rabbit's foot ferns. We're going almost exclusively with
different ferns for this tank. Epiphytic plants like ferns can go right on bark or the walls
without needing to root in soil. Usually in a vivarium, you'll see bromeliads as an epiphytic
plant, but honestly I might prefer the ferns. And the scale fits really really well in a smaller
tank like this. We just jammed the rabbit's foot fern against the wall loosely, and over time it
will actually attach itself. On our logs, we first laid down a moss cushion. Then placed the fern on
top and tied the rhizome down with cotton thread. The moss and fern are going to grow over the thread
and make it completely invisible as it settles into the tank. We also added this little corkscrew
rush near the waterfall. I got this a while ago, but it needs a more humid environment than we can
give it in this pot, so hopefully it's a lot happier here by the water. And now for my personal
favorite part, moss. We're adding a few different types of sheet moss around the walls. We're adding
it near connection points to help blend our hardscape and in shaded areas. In time, the moss
will grow to cover most of the walls, but it grows really slowly, so let's add some climbing plants
to help cover the rest. We threw in some creeping fig and margravia. We also added two very fast
growing plants that we used in our nano day gecko tank. Palaeodepressa tiny tears and hydrocotyl.
But we aren't done yet. We need aquatic plants for in and around the waterfall. For the aquatic
plants, we used anubias and bucephalandra on the waterfall and around the banks of the stream.
Most people know these as aquarium plants, but they actually grow really well with only their
roots in the water or partially submerged. These are also epiphytic plants, so they are just going
to latch on to the wood and exposed bark. We also sprinkled some christmas moss and java moss,
which are aquatic mosses. These aquatic plants are going to absolutely transform this waterfall
section. They're going to create a really nice bridge between the water and land areas. We used
a bit of sand for the bottom of our river and topped our substrate off with a layer of leaf
litter. This is going to give us a really nice forest floor look and give our cleanup crew
something to start munching on. As the piece de resistance, we sprinkled a few floating plants
in our tiny little river. And with that, the tank is done. Let's sit back, miss daily, and wait for
it to grow in. While we wait, it's the perfect time for you guys to hit that subscribe button
to see more videos like this one. All right, two months later, let's have a grand reveal.
We love this tank. Honestly, it might be one of my favorite ones that we've ever done.
Something about the combo of the crisscross tangly canopy of branches and forest floor with a stream
just scratches an itch in my brain. This squiggly branch here, which I was a bit unsure about
earlier, is now my absolute favorite part of the tank. I love the epiphytic ferns that are attached
directly to the walls. This is the first time that we've done it, but I think it might be a
new staple for us. The new growth on the autumn ferns has a really cool orangey and autumnal look,
which brings in small pops of color to the tank. The rabbit's foot ferns used to just be wedged
to the walls, but they've now firmly anchored themselves and you can't really move them,
even if you tried. The tiny tears are starting to climb everywhere and the hydrocoddle is spreading
across the floor. All the plants are growing really well, but the aquatic plants are definitely
growing the fastest. The plants and moss around the waterfall have grown so much already. The
aquatic mosses are covering every inch of the waterfall ledges and soon they'll cover these
sticks too. I like the different shapes and textures of the Anubias and the Bucephalandra
and they've adapted really well to life outside the water and have already sprouted new leaves.
The stream is kind of only visible from certain angles, but I actually think that
that adds to the charm. It's nice to move around the tank and catch new details. I think this tank
is one of those that looks really good in person, but can be difficult to capture on camera because
there is a lot of depth. All in all, we are really proud of our newest slice of the jungle. We tried
some new stuff in this one and we're happy to see that it paid off. I can honestly stare at it for
hours. But what do you guys think? Did this tank turn out well? And who do you think would be
happiest to live in here? Let us know down in the comments. And if you're interested in a custom
build like this one, or in just buying this one, hit us up at tangledearthavariums at gmail.com.
We also do consultations so that we can help guide you through your own process of making your tank.
If you made it this far, make sure to leave a plant emoji down in the comments so that we know
you stuck around. Thank you so so much for supporting the channel and if you liked the
video, don't forget to hit like, subscribe for more videos, hype it up, and we'll see you in
the next one. Bye!
