I Made an Ecosystem With a Mini Pond Inside, Here’s How!

Mini World Craft
6 followers
57 Video Views·Sep 19, 2025
In this video I'll be showing you how I turned this glass bowl into an ecosystem that even has
a mini pond. Let's get straight into the build. This is an 8 litre or 1.8 gallon glass bowl. It
looks a lot bigger in real life than it does on camera. Firstly I'm going to add a drainage layer.
For this I'm going to be using Leeka. It's extremely lightweight and porous making it
the perfect material for drainage. Also known as a false bottom, the drainage layer will provide
a place for excess water to sit instead of it sitting in the substrate. For a terrarium this
size a drainage layer is essential. On top of the drainage layer I'm going to place a substrate
barrier. For this I'm using window screen mesh. This will prevent the substrate from getting down
into the drainage layer. It's inevitable that some substrate will get through but this will
hold back the majority. Time to move on to the substrate. I'm using my usual mix which I'll put
up on screen now. It holds moisture, is resistant to compression and provides nutrients for the
plants. For this build however I'm going to be adding some crushed up leaves into the substrate
mix. I'm doing this because some of the creatures inside would use these as a source of food.
I collected these leaves myself, washed them and then sterilized them. To sterilize them I cooked
them in the oven until they were bone dry. Another method is to boil them in water. Doing this reduces
the chance of unwanted pests being introduced. After mixing a generous amount of leaves into
the substrate I went on to add the soil mix into the terrarium. I'll leave some amazon links in
the description to all the components of this soil mix so you can have a go at making it yourself.
When adding the substrate I sloped it up towards the back and gently patted it down.
This will help create a good sense of depth. With the substrate in I'm now going to show you how to
make a mini pond inside the terrarium. I'm going to use this small plastic cup and dig a hole in
the substrate for it to sit in. It can then be filled with water and it's as simple as that.
You could leave the tub as it is and it would look just fine but I want to make it blend in
a little better. To do this I'm going to start by taking some sandpaper and roughing up the inside
of the cup. It's very important to do this because if you don't the next step won't work as well.
After the inside of the cup is all scratched up I'm going to take some silicone and coat the
inside of the cup. Silicone is great at sticking to glass but typically it struggles when sticking
to plastic. Scratching up the inside of the cup creates a larger surface area for the silicone
to hold on to. After I put a generous amount in I use my finger to spread it out. I should mention
that this should only be done with aquarium slash marine grade silicone or 100% silicone.
Now I'm going to take this crushed dried aquasoil and pour it into the cup. I'm then going to use
my finger to press it into the wet silicone. You haven't got to use aquasoil and you can use
something a little more accessible such as cocoa fiber. Just make sure the cocoa fiber is bone dry
before applying it. I'm hoping this will make the pond look a lot more seamless inside the terrarium
and it won't just look like a plastic cup sitting in the substrate. After it was fully coated in
aquasoil I left it to cure for 24 hours. 24 hours later and the pond is ready. I did give it a rinse
off camera which is why it's wet. Now I'm going to take the terrarium and place the pond back inside.
In my opinion it looks a lot better and more natural than it did before.
With the pond in place it's now time to add some hardscape to the terrarium.
This is driftwood and I'm going to be using it as the primary hardscape material for this terrarium.
I take some time to experiment with various different layouts and structures until I come
up with something that I'm happy with. I'm not going to be making anything too complicated in
here as the majority will be covered in plants anyway. Here's what I settled with for the
driftwood. It's very simple but should form a good skeleton which can then be brought to life.
I also went on to add a couple bits of lava rock to accent the wood.
Once again I experimented with their position before finishing off the hardscape.
Here's the final hardscape. As I said earlier I didn't want to create anything too complicated
as there's going to be a high volume of plants inside this terrarium. Now it's time to bring
the terrarium to life and start adding the plants. I'm starting with this Boston fern.
I use my finger to make a small hole in the substrate before using some tweezers to plant
the fern. I really love the bushy and wild look this plant brings to the terrarium.
Sticking with ferns I'm next going to be planting these asparagus ferns.
In my opinion they look like miniature bushy trees and really help create a good sense of scale
inside the terrarium. Once again I use some tweezers to plant them inside. When choosing
plants for your terrariums it's important that you choose ones that will thrive in high humidity.
Most tropical and aquatic plants tend to do well in terrariums.
I planted another smaller Boston fern to fill out the background.
Even with just a few of the plants in the terrarium has really started to take shape.
Before adding any more plants I'm going to take a plastic cup fill it with leaves and then fill
it up with water. I'll be adding these to the terrarium a little bit later and it's much
easier to do so when they're wet. Next I'm going to take a few cuttings from this Fittonia.
Although they have little to no roots at the moment they'll have no trouble rooting and growing inside
this setup. Using some long tweezers I plant the stem into the substrate. I really like the pop
of color they bring to the scape. Now I'm going to place in some moss. I found this patch in my
garden and it seems to be a mix of fern moss and hypno moss. I use the tweezers to place it inside
the terrarium and then gently press it down onto the substrate. Before planting any more moss or
plants I'm going to first put in the leaf litter. This will be a food source for some of the
microfauna species that are going to live inside this terrarium. It also gives the terrarium a
forest floor look which I think looks great. Now I'm going to plant moss throughout some of the
leaf litter. If you want to learn more about terrarium making I highly recommend you check
out my ebook. It contains everything you need to know to make and keep long-lasting healthy
terrariums. It's perfect for beginners or someone that's new to terrarium making. I'll leave a link
at the top of the description or in the pinned comment. Now I'm going to take some small Peperomia
verticalata cuttings and plant them inside the terrarium. These will help bring some detail and
interest around the scape due to their dark green turtle backed leaves. These cuttings will root
themselves in no time. I've got some leftover Glossostigma from a previous project so I'm
going to use that in here as well. I split it up into smaller chunks and then plant it inside the
terrarium. This plant should creep and grow around the base of the terrarium and bring some nice
textures and detail to the bottom of the scape. I also planted a small Hygrophila which was also
leftover. I then went on to place some smaller pieces of driftwood around the scape to add a
little more detail and also some small acorns. These really give it that foresty floor look I
was going for. If you're enjoying this video be sure to drop it a like. Before filling up the pond
I gave the terrarium a good spray down. Using a small cup I carefully filled up the pond with water.
It had a lot of leaves and dirt in it so I pulled the majority out and then done a quick water change.
This was easy enough with some airline tubing. With all the dirt gone I then filled the water
feature back up. As it is it looks a bit plain and boring. Duckweed will solve this problem.
I used some tweezers to scoop some out and place it inside the pond.
It will quickly grow and multiply and will soon cover the entire surface.
That's all the planting done and I'm really happy with how the terrarium's looking.
Now it's time to add some life. These are springtails. They are a tiny hexapod which
clean the terrarium 24x7. They'll eat any mold or decaying matter inside, process it and then
poop it out in the form of fertilizer for the plants. They're so small they can even walk on water.
In this tub is about 10 isopods ranging in size. I got these a while back and I'm not sure on the
species but they've been breeding really well. Let me know in the comments if you know what they are.
I gently place them inside the terrarium and they start exploring in no time.
They will mostly feed on the leaf litter and on decaying matter but I'll also be placing in food
like this old mushroom coated in calcium powder. All that's left to do now is place on the lid
and watch the terrarium grow. Three weeks have passed since setting up this terrarium and it's
thriving. The duckweed has pretty much covered the entire surface of the pond. I've done a few
water changes to combat algae. The moss has started growing and is even growing up the sides of the
glass. The Peperomia verticolata has grown a lot and has almost tripled in height. New growth is
visible on the Boston ferns and the asparagus ferns are also doing well. As for the springtails
and isopods they've also been thriving. I don't see them too often as their numbers are still
relatively low but I should be able to see their population increase soon. Let me know in the
comments what else you think I should introduce into this setup and thank you for watching.
Check out this video for another terrarium build.
