Making Regalia - Episode 1

Native American Crafts
28 followers
1 Video View·Jul 16, 2026
AI Generated·May contain errors
Welcome friends.
My name is Joaquin Lonelodge coming to you straight from Concho, Oklahoma.
I have the privilege of actually starting this new show bringing you step-by-step instructions
on how to do Native American artwork, beadwork, applique, and other facets of Native American
regalia.
Through our segments I'll be teaching you how to do the most contemporary modern design
work to the most traditional Native American artwork.
So first things first, let me tell you a little bit about myself.
Here on the show I'll be teaching you a lot of facets as far as sewing, beadwork, and
a lot of people think this is actually just for women only.
Here in the powwow world there's a lot of actually males that actually do sew and bead
like myself and, you know, I've gone to different fabric stores and actually I like to go down
to the fabric district downtown LA.
That's just one of the facets I do.
My background, you know, I'm actually a former U.S. Marine.
I race motorcycles, you know, I've actually played football so not everything is actually
just for the women.
Another little bit about my background is actually I've competed in Native American
style of dance ever since I was two years old.
So I've traveled all the way from the state of Florida all the way to California, all
the way up into Canada.
Native American dance has given me these opportunities where I can compete anywhere and actually
go to different places.
I've seen things that, you know, if I wasn't actually dancing I probably would have never
seen but for me to compete, you know, I had to actually build my own regalia and so that's
where I've come upon to actually learn how to sew and bead for myself and hopefully through
these shows I can actually show you how to bead and sew and so you can continue on.
So when I first started dancing it's kind of a funny story where it happened.
I was two years old.
My grandparents and my mom actually took me to a powwow in Scottsdale, Arizona.
You know, as a little Indian kid I was, you know, I'd run around in my diapers and stuff
like that.
At the time my mom was walking around the powwow searching at different stands and my
grandparents wanted to see the men's fancy dance contest and so they thought that my
mom was actually watching me and so they went up to the arena and they ran into my mom and
they both realized that neither of them were actually watching me.
They went back to the stands, searched around, couldn't find me and once they looked actually
into the arena, I was actually in the arena dancing with the men just with my baby bottle
and my diapers.
And so from then on my grandparents decided that I would actually dance men's fancy.
They began making my own regalia and from there, you know, I continued on to where I
am now.
So now I've been dancing for about 32 years going on.
I've won so many powwows as far as Across the Nations, Skiminson, Red Earth and Verona
and I've actually danced all the way up into Canada too.
So from our segments, I'll be teaching you how to do most concept design work and the
cool part is you don't have to be the best artist out there.
I'm going to show you tricks of the trade so actually you can use copy machines if you
see like a style of artwork that you really like that you want to actually implement on
to say your medium is like material.
The best way to do it is actually from my design work is I'll draw a lot of templates
and I'll draw my artwork and then transfer from template to the material and then from
there we'll actually transfer on to the medium.
So now to show you how to get to the different steps, first of all, we start off with paper.
That's pretty much the basis of all of my artwork.
You know, you can actually do, you don't have to be the best artist like I said.
You can use copy machines.
If you see an image that you want to use, you can actually cut that out and use that
for your template.
The best cool part about using copy machines is I've noticed is actually you can change
the different sizes so if you want to make a design bigger, you can actually, you know,
bump up the like actual size on the printer or you can actually make it smaller if you
want to.
I can actually do the same thing with my design work.
I can actually design whatever I want and use it on a copy machine and change the resolution
and the size of it to fit whatever medium I want.
But from there, what we want to do is you'll take your design and we're going to cut out
the design and use masking tape.
Using masking tape is awesome because you can actually trace it around whatever medium
you want to and continue using it later on.
You can use it in a future design works or, you know, save it for something else.
So let's get started.
The first design I want to start out with is really simple.
It is actually a geometric teepee.
I love teepees because of my last name, Lone Lodge, and a lot of my design work I try to
implement teepees in, kind of like my signature.
This one is really simple because you don't have to be an artist to this one.
As long as you get your measurements perfect, you can always make a perfect teepee.
So what I like to do is I like to make my teepees elongated.
It just seems like it's better off.
So the width will be kind of shorter and the length will be actually longer to actually
spread the teepee out.
So what we're going to first start to do for the geometric teepee is I'm actually going
to draw out a rectangle.
The rectangle, you know, of course is pretty easy to do.
What I'm going to do, I'm going to actually make this one a little bit bigger so everyone
can see.
So I'm going to draw this one 8 inches tall, a really big teepee.
So what you do is just take your piece of paper and your ruler, draw 8 inches, and from
here we're going to go 4 1⁄2.
So take from the edge of the paper, 4 1⁄2, 4 1⁄2, and I've got my marks and I'll draw
my straight line.
Perfect.
And what I also like to do, because I'm actually going to be using this over and over and over
to make the designs inside the teepee, I like to actually draw phantom lines as I like to
call them.
That way I know exactly where the center is at.
So from 4 1⁄2 that will be 2 1⁄4, draw a 2 1⁄4 in there.
I don't like really darkening this line in because it's just kind of like I said a phantom
line.
And then from the 8 inches, of course it's going to be 4 and 4 there, okay.
And that's pretty much your basis of your teepee.
From here, what we're going to do is we're going to make the triangle of the teepee.
So from end to end, all I do is connect from here to there.
Now notice that I am making it like an extra large teepee.
I'm only doing this because, you know, I'm actually doing this for instructional purposes.
Now if you want to use this on a different medium and actually make it smaller, all you've
got to do is just change out the measurements of it and you'll be done after that.
So continuing on with this design, a lot of like contemporary teepees will have steps
on here.
It's kind of the norm.
So what I'm going to do is I'm going to add the steps in here.
And a lot of people like to either do it from the V-line or actually from here.
I'm just going to add it straight here.
So I'm going to measure this out, go half an inch, half an inch is good, there, straight
down, another half an inch, half an inch from the V-line, okay.
And now we'll just cut our teepee out.
And like I said, you know, like these templates that you can use, you can use them over and
over and over and from my storage, I've got like a lot of these templates which is cool
because sometimes, you know, if I'm trying to create a design or something, I can always
revert back to them and look back or I can add them to different pieces and then they
all look different.
There's that.
There's your base of your teepee.
Now let's just cut out the steps.
And the other way you can actually keep your templates from actually damaged is I like
to use masking tape.
What I'll do is I'll masking tape the entire piece and then I'll actually have to cut it
out of the masking tape.
But from there, when I do my tracing and stuff, it doesn't actually ruin the edges and the
actual points of the ends will actually stay sharp.
A lot of times when you actually do trace, sometimes, you know, it will actually wear
these ends out.
I don't, you know, that way you can always get your design perfect again.
So from there, I'll flip this over and there you got your teepee.
So I got my teepee done here.
What I'm going to do is I know it's kind of hard to see on top of the paper so I'm going
to, for clarity, I'm going to put on this on my material right here so you can see it.
That is your beginning of your first teepee.
Later on, what I'm going to do is since I still got my phantom lines here, I can actually
do design work inside this and actually make it more detailed work.
But this is how you make your first teepee.
From here, what we're going to do is we're actually going to trace this onto heat bond,
transfer onto material and then we'll sew it onto our medium.
I like to do this on top of, you know, actual like design shirts as far as like dress shirts,
hoodies, you know, pretty much you can put this on just about anything.
So from there, this is a pretty tall teepee.
What I'm going to do is I'm going to start my design work inside the teepee.
That way we can add more colors to it, you know, we can make, what I like to do is actually
I like to make darker colors into lighter colors.
So I'll start with maybe a dark, maybe, maybe like a red and then go orange and then yellow
and then white or something to protrude that.
So from here, I'm going to start another design.
Real easy one to do is I'm just going to mimic the outside and just do another triangle.
So from here, I'll probably do a half an inch on both sides of the bottom.
From here, I'm actually going to, instead of doing a half an inch, I'm actually going to do
about an inch and a half.
So I'll draw this line, bam, just like that.
So what we're going to do is when we start piecing our materials together, this piece
and this outer piece will be the exact same color because that will be our outside color.
From here, we're going to cut this out and we'll actually use a different material to change
out our colors and stuff.
Another thing I like to do for tricks is I actually like to do different color threads.
So on here, if this is maybe, I'd say maybe a dark red or something, I'll use a maroon just
to throw another color into it.
So we've got our first design in here.
The second one is going to be a little bit different from here.
A really easy one to do is we're going to actually do steps in here.
So from here, we're going to just measure like how much room we've actually got to work with.
Currently, from the top of the base here, here we have six and a half.
So we're going to go every two inches and we're going to put a step in there.
Actually, it makes this more detailed.
We'll go every inch, two, five.
Five I think is going to be our bare minimum that we're going to get out of this.
So from there, just draw our straight lines.
That's why I got an eraser because sometimes I do mess up a lot.
One thing to actually keep your lines straight is actually to mark it more than once as far
as your inch.
So go five up and over here, continue on.
We'll mark another one but we're just going to make small little tiny marks so no one
can really see them.
So we've got our little indentions here.
This will keep our lines perfectly straight.
Okay.
Now we've got our steps.
Okay.
The steps are like, you know, this is what we're going to do in transition is we're actually
going to do a different color for like this design.
Another way to actually keep all your templates together is before you cut this out because
this is going to be pretty much your masterpiece is before I cut this, I'm actually going to
draw it one more time and trace it for the first time.
That way I have all the pieces together.
So what I'll do is I'm going to trace this piece out, our masterpiece, so I have it later
on.
Okay.
So I'm actually going to cut this piece out right now.
This piece right here is the outer side and since I've already drawn it here, I still
have it and I'm going to cut this one that I just traced out and what we're doing is
we're going to have, we're actually creating all the templates for this one design.
There's that and there's that.
So now you can see we actually have another piece inside here that we're actually going
to use for a different material.
It's already perfectly aligned, you know, perfectly measured out.
So this one is going to be another piece.
Now we're going to draw another piece inside here and then another piece and another piece
and so on.
So what we're going to do again is we're going to trace this out just so we have it for later
use just like that.
Now we're going to create the steps.
This one's going to change up the design of how we're going to work with this.
So the steps, just draw straight down.
I'm trying to eyeball this right now.
Usually what I'll use is my ruler and I actually get perfect measurements, but I'm just going
to eyeball this one.
This one is kind of easy to do.
It's usually you can do it just by eyeballing, but if you really want to get it perfect,
you know, you can use your ruler and actually do the measurements.
Okay, now we've got our steps.
Now we're just going to cut it out.
Almost done cutting out our steps.
And this will actually be another color, another material that we'll work with.
So what we're doing is we're just making another template for another piece of material.
So if you see this, you know, you can kind of understand what we're actually doing is
making, we're actually stacking the material on top of the material.
See, here's the other triangle that I drew out earlier.
So now I still have it.
Put that one just where it was before and now we'll put the steps in the middle, just like that.
Now we're going to do, we're going to do one more triangle in the middle of this one.
So what we're going to do is, what we're going to do is we're going to draw this out again
so we have it again and I'll draw another triangle and cut this one out.
So take your paper over here, your scratch paper, and we're just going to trace this out again.
Now going all over design work, you know, this is pretty common.
Usually I do this a lot for all my design work to actually do steps and actually to layer a lot of material.
So you're going to get used to it.
So what I'll do is cut these steps out one more time and there we go, perfect replica.
So now, if you look, I have steps in there and I'll make another one.
What I like to do is change it up, instead of doing the steps this time, we'll go back and do another triangle.
So what I'll do is just find the center of this, which is there,
and all I've got to do with my ruler is I want to keep my triangle not touching the steps,
or as close to it as possible.
So what I'll just do is I'm just going to find the center here and just draw from end to end, just like so.
From there, just cut off these steps from your master and there you go.
Now, right now, you're working with one, two, three, four, four different materials you can work with.
And like I said, I like to go transition from the lightest colors to the darkest or, you know, vice versa.
It's whatever you want to do.
So from now, what we have is we've got our first template.
This one, we are working with four different materials.
We can continue on all the way to the very bottom.
But right now, this is what we have so far.
Okay, so what we've done, we've actually started our design work for our first tipi.
This one, you know, we've worked with four different materials.
So we created four different patterns so we can utilize it and actually transfer it onto the medians.
First, we've got our smaller tipi.
Then we have one that kind of like has steps on it.
This one kind of throws it up a little bit.
It gives it more detail work.
Then we have our other ones, our other triangles.
But the best way we can do it is when we first put them together, we are going to stack them on top of each other.
So you have your outer triangle up here.
Then you have your smaller ones in here in the middle, just like so.
Very simple, very easy to do.
Next up, what we are going to do is we are going to actually pick out our colors that we are going to use.
My preference is I always like to use darker to lighter colors.
Sometimes I actually like to use on the very outer piece, I actually like to use a print.
That one kind of throws off my design just a little bit.
But then in the middle of it, I'll actually use the lighter tones to the darker tones.
It just kind of adds to it.
It makes it kind of a unique piece that I like to look at.
So from there, it is whatever you decide you want to use, whatever colors you want to do.
You can either go vice versa.
You can go from darkest to lightest to lightest to darkest.
It depends on what you want to do.
But the cool part is that since you actually have these templates, you can continue using them later down.
You can save them for another piece or continue using them on more pieces.
The best thing I like to do is always masking tape them.
That way you always keep your ends very neat.
And after time, you know, you don't have to worry about them actually getting rough.
So from here, what we are going to do is actually pick out whatever fabrics we want to use.
I like to use a lot of satins.
Satins work really well.
I don't like to use any like any stretchy types of material or a lot of sequins.
A lot of sequins will actually bind up your actual sewing machine.
But, you know, there are occasions I will use sequin material.
I like to stay away from any kind of stretchy materials because that one is really, really hard to work with.
You don't really want to work with too much stretchy materials because your seam will never really actually stitch in really well.
So the most basic ones I like to use is cottons, satins.
You know, there are some materials out there you might want to watch and stay away from.
They will actually have kind of like glue already based on there.
That will actually gunk up your machine too.
And a lot of times it is actually hard to stitch in.
The other thing I like to use, like I said, is I like to use different colors like threads.
Sometimes if I am working with a piece that actually has multi-colors, I will use the exact same thread color.
That way you can't actually see my actual threads or I will actually change it up and maybe use a darker one to actually put more color into it.
So now on our completion, what we have done, you know, we have created a very, very simple, very unique geometric tipi.
What I have always liked about this is, you know, this is more traditional designs.
You know, I am partial to these designs.
I like them a lot.
I have actually got one tattooed on me at the moment.
But, you know, like I said, this is one I really appreciate.
This one is very simple, very easy, and like I said, you don't have to be the best artist in the world to actually create this geometrics
because most of the geometrics are actually done by measurement.
That is usually how you get your straightest lines is actually the best measurement.
Now, if you want to review, like, how we actually created this template and or you just want to miss a step or you want to review any of the segments,
we will actually be broadcasting all these segments on the Cheyenne and Arapaho television website.
At this time, I personally want to thank you for tuning in to our first show on actually how to do applique.
Here, later on, we are going to have more segments to actually do bead work and to do more design work.
So stay with us and thank you. Aho!
Making powwow regalia is truly an art form.
If you would like more information on how you can get started, contact Joaquin Lonelodge at 405-476-9291
or you can email him at JLonelodge at c-a-tribes.org.
