I Made a Mini Indoor Pond For Tiny Creatures, Here’s How!

Mini World Craft
6 followers
AI Generated·May contain errors
Video Summary
AI GeneratedThe creator builds a custom mini indoor pond for their desk, starting from scratch by cutting and assembling a glass tank. The project involves detailed hardscaping with stones and driftwood, strategic planting of aquatic and semi-aquatic species, and the eventual emergence of a self-sustaining ecosystem featuring unexpected micro-fauna.
In this video I'm going to create a mini indoor pond for my desk.
It's going to be packed full of plants and even a surprise colony of creatures that I
certainly didn't expect. Now let's waste no time and get straight into the build.
The size tank that I want to use is really quite unique and I can't find anyone that
sells it so I'm going to build it myself. The glass that I've got here is from frameless
picture frames and the majority is cutoffs from previous projects.
The first step is to take some measurements to work out the exact pieces and dimensions
that I need to cut. Here's the list of pieces that I need to cut to build the tank.
As for tools here's what you'll need. A glass cutter, a ruler to cut and measure with,
a marker pen and some safety glasses. To make things a bit easier I've stuck some
blu-tack to the underside of the ruler which stops it from sliding and results in much
straighter cuts. After lining up the glass cutter I'm firmly pressing it down and pulling
it back in one smooth motion. The sound you're looking for is something that resembles paper
being torn. With a line scored it's time to snap the glass. There are loads of different
ways of doing this but one that I like is placing a long wooden skewer under the score
line and then gently pressing down on both sides. The glass snaps with ease and you're
It's really important to only score the glass once and not go over the same score line over
and over. All this is going to do is blunten your glass cutter. You're going to make some
mistakes as do I but after some practice you'll realize it's not too hard whatsoever.
Now that I've got all the pieces cut out I'm going to quickly assemble them together before
sanding just to make sure they all fit. To do this I'm just going to use some electrical tape.
It goes without saying to be extremely careful because the edges of the glass are really quite
sharp. I'm happy with how they all fit together so I'm going to take them all apart and sand all
the edges down. With all the pieces sanded and dried it's time to get them assembled.
I'm placing all the pieces in their correct location to make assembly as smooth as possible.
Now I can start applying the aquarium silicone to join the glass together.
I'm applying a thin bead slightly thicker than the thickness of the glass.
Now I can carefully start getting the glass in place. The first two pieces are always the most
difficult but after that it's pretty straightforward. You've got about 10 minutes before the
silicone starts to cure so it's important to work carefully but fast at the same time.
With the back insides in place I can now do the front panel. Before the silicone starts to dry
I'm going to use the rounded back end of this paintbrush to smoothen it out.
I'm making sure to wipe it down with some tissue after every pass to keep it as tidy as possible.
It's been about 24 hours since assembling and the silicone is now fully cured.
I'm using a sharp blade to separate it away from the base and then tidying up the excess silicone
around the edges. With the tank all cleaned up I'm really happy with how it's looking. It might
not be the neatest tank that I've made but I think it's going to work just fine. Before I can
actually start creating the mini pond I need to water test the tank to make sure that there's no
leaks. It's the next day and there's no leaks so I'm now going to sort out the lighting.
I've got this nano light and display stand that I think will be perfect for this build.
I'll leave a link to something similar as well as most of the other materials that I've used.
With everything set up and good to go I can finally start creating the mini pond.
I'm going to start off by pouring in some fine sand. I'll add some more later but for now I can
start creating the hardscape. Here I've got a good selection of some small dark cirio stones.
These rocks have got some really nice detail and their dark coloration will stand out nicely
against the light sand. On top of the stone I'm going to place in this piece of driftwood that
looks like an old dead tree stump growing into the water. It's really unstable so I'm going to
I'm wedging some tissue between the wood and rock and then soaking it with some liquid type super
glue. Once dried it's nice and solid. Now I can continue placing in some more cirio stone around
the wood. I want it to look like the wood has grown down and over the rocks. These are some
spiderwood branches and I'm going to use them to add some more detail to the scape. I'm placing
these on the wood to look like vines and roots. Adding small things like these is an easy way to
take the detail of the scape to the next level. Next I'm going to add a few more stones around
the base with them getting gradually smaller the further away they are. A couple different sizes of
gravel help bring even more detail to the sand. That's the hardscape done and I'm really liking
how it looks. Despite the small size of the scape I'm really happy with the amount of detail that
I've been able to add. At the moment there's no nutrients in the substrate so let's change that.
I'm breaking a root tab down into smaller pieces and then pressing them down into the sand
throughout the background. These are full of nutrients and will help promote healthy plant growth.
After a light spray down I'm going to build up the layer of sand in the back.
At the moment it's just too shallow and the nutrients from the root tabs will likely leach
into the water column. I'm placing in some stones to act as a retaining wall and stop the sand from
gradually creeping forward over time. Now that's done I'm going to give the tank a really good
spray down until there's a nice puddle of water at the bottom. This plant is known as dwarf sweet
flak. It's a fine grassy plant that's often used in ponds and shallow water setups just like this
one. It naturally grows with its roots in shallow water sending its leaves up and above the surface
so this setup really should be perfect for it. When planting it's important to try and keep the
rhizome above the substrate and only plant the roots down below. If the rhizome is deep into
the substrate it's highly likely to rot. These aren't looking in the best shape at the moment
but with some time they should put out plenty of new growth. Already the scape has sprung to life
and is starting to look like a mini slice of nature. The next plants that I'm going to add
are some Anubias and Bucephalandra. Their small leaves fit the scale of the scape really well
and will add some nice interest around the wood. To plant them I'm simply wedging them in gaps
between the wood and stone. They'll pull their nutrients directly from the water column.
The next plant to go in is this crypt parva. It's one of the smallest species of crypt and I think
it's going to add some nice detail to the foreground. With the planting complete I'm
really loving how this nano pond is looking. I've kept the planting really simple to try and make
maintenance as easy as possible. The last thing I want is to pack this small tank full of fast
growing plants and have to trim and pull them out constantly. A small piece of tissue helps
disperse the water and stops it from disrupting the sand or plants too much. Now that it's filled
with water it truly feels like a tiny slice of nature. Before leaving it to grow in I'm going
to get it in place on my desk and set the light up on a timer to be on for about 10 hours a day.
It's been just over six weeks since I set up this mini pond and I'm glad to say that it's doing
really well. Before I show you the amazing abundance of life that's appeared in the water
let's take a quick look at the plants. The immersed Anubias is doing really well and has sent out a new
leaf which is always a good sign that it's healthy. A week after setting up this ecosystem
I planted a small patch of moss on the wood and it's been growing nicely. As for the dwarf sweet
flag it's been doing okay but it has been struggling slightly. The old growth seems to be
struggling with the lack of humidity but there's new growth coming through and it seems to be
coping okay. The plants under the water are also nice and healthy despite the small amount of algae
throughout. Despite me not adding any creatures myself this ecosystem has developed and the water
is now full of life. After looking closely there's a small colony of these tiny snails
happily eating the algae and going about their day. As for how they got in here there must have
been some eggs on some of the plants that I used. I've kept this type of snail many times before and
they really are perfect for this kind of setup. This is about as big as they get and they don't
eat healthy plants like some people think they do. Whilst filming the snails I discovered that
they're not the only creature that's emerged in here. There are hundreds and hundreds of these
tiny microscopic creatures all throughout the ecosystem. These are tiny copepods which are
actually a type of plankton. They might look a little bit unusual but they're actually a really
good sign that the ecosystem is healthy and thriving. It's the small details like these that
make creating these ecosystems so rewarding and fulfilling. Being able to sit at my desk and
glance over at this small pond full of plants and tiny creatures is something that I'll truly never
get bored of. I'd love to hear your thoughts on this build in the comments and I really appreciate
you making it all the way to the end of this video.
