How To Make A Laminate Dresser Look Expensive

Trash To Treasure
3 followers
2 Video Views·Jul 7, 2026
This is a CRAZY before & after of a mid century wood & laminate dresser, paint & woodgrain combination with an industrial feel!
Approx a day and a half of work (including dry times), and this piece is practically unrecognizable from its dated (and very red) former self.
AI Generated·May contain errors
Hello furniture friends! Welcome to 2022. This is the first video of the year and I'm super excited
to show you what I'm working on. This little mid-century dresser was a Facebook Marketplace
find. At first glance, to someone who maybe doesn't know a whole lot about furniture,
this might actually look like a mahogany piece. One, because of the color and two,
because of the faux wood grain they have printed on everything. I assure you it is not actually
mahogany. This piece is solid poplar for the most part. I'm not sure about these handles,
I don't love the shape of them. I have kind of an industrial vibe in my head for this piece,
kind of my vision for it. One thing's for sure, it definitely needs an update. So stay tuned,
you're not going to recognize this piece when I'm done. My name is Angie and I refinish furniture.
Sometimes I paint and sometimes I don't, but I always do what I can to save old pieces from
the trash. Welcome to my workroom. Okay, wasting no time jumping right in here. The first thing I do
when I'm working on a dresser is to pull all the drawers out and make sure the drawers are intact.
All the dovetail joints are tight, the glue blocks are in place. You can see this one's
missing a glue block, I'll have to replace that. And I also make sure that the glides and slides
are sturdy and intact. I also pull off all of the hardware. Usually at this point I'm trying
to decide if I want to reuse it, repurpose it, or replace them all together. In this case,
I may end up reusing the top ones, but I am not loving the hardware on the lower drawers.
I don't like the shape. I kind of have a vision for this piece and it's just not going to fit
into that vision at all. Pull this one drawer out and on the bottom I see a signature. Now,
graffiti is not uncommon if used furniture, especially if there were kids around it,
but I think this is actually a maker's signature. So I did a little digging online and I did find
one based out of Quebec, which is here in Canada. The dates are right and I'm pretty sure that's
who made this dresser, which is kind of cool. And there it is. I always find a plastic drawer
piece that's broken in every single dresser. Always there's at least one. Luckily, I keep
these on hand and I'm actually just going to do this right away and then it's done and I won't
forget about it. It's a different shape than the other one, but as long as the height is right and
the width is good and I'm going to give it a little test here before I fully install it.
Looks good. So I'm going to go ahead and drill some holes because the holes here on the new
piece are slightly off from the other one and put the screws on and away we go. I just wanted
to show you guys the underside of the drawer faces. So on a long flat drawers, it's a solid
piece of wood with this fake wood grain printed on it. This wood grain is not a veneer and you'll
see that when I go to strip it off later on. And on the curved drawers, which is pretty typical,
it is layers of plywood and there's actually a wood veneer on both the inside and the outer side.
And on the outside, there is that same fake wood grain printed onto that veneer.
I've actually done this exact dresser before, the same style, and I know from experience that
the veneer on the curved drawers is not that nice, so I am going to be painting it. This whole piece
is going to be a combination of wood grain and paint. Because the sides and top are laminate and
not actual wood or wood veneer, I am going to be painting the outsides, the trim pieces, the top
three drawers, and then the bottom four drawers, the big drawers, are going to be wood grain.
If you're wondering what the heck I'm doing with this little piece of whatever that came loose
when I flipped this over, I don't know what this is but I cannot pick it up. This is the perfect
time for me to use my new magnetic tool and look, simple. I'm so happy to have one of these finally.
Going back for a second to what I said about the construction of this piece,
this is mostly solid wood with laminate sides and a laminate top. Everything else on this dresser
is wood. The drawers are wood, the legs are wood, the frame is all wood. These dressers get overlooked
all the time and I've actually had some pretty negative comments on a couple of my videos where
I'm painting laminate dressers saying that these dressers are cheap, they're junk. Well, guess what?
This dresser you're looking at now, there's no denying the fact that this is obviously a higher
quality dresser. It's beautiful walnut veneer, but in between those layers of veneer is pressed wood,
which is actually quite typical of this era of furniture making. A lot of beautiful
mid-century pieces are pressed wood in between layers of more expensive and exotic wood veneer.
And to be honest, and I'm ranting a little bit here, but it really bothers me. Part of the reason
I'm doing what I'm doing is to try to keep these pieces of furniture out of landfills. They don't
belong there. Oh, laminate is junk. Well, you know what? Laminate is not wood, you're right, but
this dresser is the exact same age as the walnut one I just showed you.
They're both still here. They're both still sturdy. This is a solid piece of furniture.
Just because it's not all solid wood doesn't make it a piece of crap. We have to stop thinking like
that. It doesn't matter what our political views are in the world. The one thing we can all agree
on is that there is too much waste in landfills. Okay, now that I have that out of my system,
I can explain what I was just doing. Sometimes when you put cleaner or water on these old
finishes that clad up a bit, I just use my heat gun to dissipate that moisture before I go ahead
with my 180 grit sand pad here to scuff sand the top. I'm not trying to take the finish off. All
I'm trying to do is get rid of that super, super shiny finish that is so typical of these dressers.
I am going to be doing a spray primer on this piece, but I still want that glossy sheen to
be belled down just to give me some better adhesion. Both of the curved drawers had some
separation of the veneer from the plywood, which I see all the time in these older curved drawers.
Not a big deal. I'm just going to force some wood glue down there, clamp it up, let it dry,
and good to go. I'm going to be painting both curved drawers, but I do need to fix this little
chip. I'm just using a little bit of wood filler, leaving it just slightly proud of the surface,
and then I'll sand it smooth and flush with the surface once it's dry.
Because I'm going to be spraying my primer instead of brushing it, I'm just adding
some painter's tape because I don't want to get overspray all over the inside.
Some overspray is pretty much inevitable, but I like to try to keep things as neat as possible
when I'm spraying. I'm using a Rust-Oleum flat black primer. Just smooth strokes back and forth.
When you're spraying, you want to move your arm in big wide strokes. You don't really want to
stand in the middle and just move your wrist. One good coat of primer should be great for this
piece, and then I'll be able to paint right over it. I'm using Circa 1850 stripper here. I've had
a few comments recently, people asking where to get this. I'm in Canada. I'm not sure exactly if
this is available outside of Canada, because it is a Canadian product, but I find it here usually
at stores like Kent Home Hardware. You could try Canadian Tire too, maybe. That's usually where I
pick it up. And I am so sorry here for missing most of the stripping. My camera battery died
and I didn't hear the beep when it turned off. So I'm so sorry. It was very satisfying, I'll tell
you that much. I grabbed a 180 grit sand pad and started to sand off the remaining red primer.
So this red primer is what they sprayed over top of the wood, which is poplar, and then somehow they
impose that wood grain on top. I don't know the exact process. I really want to do some research
and find out how some of these things were done. Man, this red stuff is a bugger to get off and to
get out of all of the wood pores, but I'm doing my best here. So this red here is the overspray from
when they sprayed that primer on initially. So I'm going to try to take off as much as I can.
I'm literally not going to sit here and try to scrape out every dovetail, but I do want to clean
this up as much as possible. I am going to be staining these drawers a different color and I
want it to look as neat as possible. Some of that overspray made its way into the drawer,
so I'm just going to try to tidy that up. I can't do this with every dresser. Sometimes the
overspray is just... it's just way too much work to try to get rid of it and it doesn't really cause
any issues. It just doesn't look the best. I also sanded that little bit of overspray on the inside
of the drawer face. Once my primer has completely dried, I just took a 180 grit sand pad, just
tried to smooth it out, make sure there were no little rough areas or spots where the dust had
fallen into it. And then I'm going to go ahead with my fusion mineral paint. The color is going
to be cold black and I'm going to put on my first layer of paint. I'm using a brand new brush. This
brush came in a set that was gifted to me from my Amazon wishlist a little while ago. When I'm doing
dresser tops painted by brush and not rolled or sprayed, I like to use a brand new brush because
the bristles are really soft and it doesn't take out every brush stroke but it does minimize it.
Usually I'm not too worried about brush strokes on my first or even second coat but I like to
add a little bit of water to the paint on my final coat which helps smooth everything out.
These are the original legs and the factory had spray painted them black. I'm going to be stripping
that off. I want the legs to be wood grain to match the lower drawers so I am using some steel
wool and the same circa 1850 stripper to get all of this gunk off. I'm going to give them a little
hand sand and they'll be good to go. If you're new to this channel I will tell you that sometimes I
paint pieces and sometimes I restore them. It just depends on the piece. I'm not at all opposed to
paint on certain pieces. I don't paint everything but there's something so satisfying about stripping
paint off a piece. I often joke around and I'm not serious it literally is just me joking that
whenever I paint a piece it's basically creating job security for me in the future when I have to
strip it back. This is coat number two of the coal black. You can see how with each coat the color
gets darker and richer. I love this color. I will never tire of a coal black and wood grain combination.
Once my second coat of full strength coal black has completely dried I'm going to give it a really
light sanding with about a 220 grit. Then I'm going to grab my trusty Tim Hortons cup here.
I'm totally Canadian. It has just a tiny bit of water in and I'm going to add some paint and stir
it up. I only do this for the final coat on certain pieces and the reason I do it is it gives me a
little bit more working time. Normally when I'm brushing a dresser top like this by the time I
get from one side to the other the initial part that I started painting has already started to
set or dry and when you go back into that part with a brush that's when you get those peaks and
valleys of brush strokes. With a little bit of water you have just a little bit more time to
smooth everything out and I like to do that for the last coat. Now I'm doing a little bit of a
custom staining on these drawers and legs. I'm using special walnut and classic gray both from
Minwax. Just a heads up I normally wouldn't recommend either stirring or taking the lids
off your cans if they're sitting on top of the piece you're about to work on. Drips and splashes
happen. It didn't happen here but it has happened to me in the past so just just a little heads up
don't do what I just did there. Open them on the floor or on another table.
So I'm going in first with this special walnut. This is the base color I want. I could have mixed
the two stains together to make an entirely new color that's not exactly what I wanted to do.
I wanted most of this drawer to have a brown undertone and the classic gray is going right
over top of it before the first layer sets. It sort of mixes with the little bit that's left on
the surface and just tints it slightly. Because I'm going for a bit of an industrial vibe here I
want these drawers to have a bit of an old wood or barn board sort of feel to them. I'm in the
home stretch now. I'm going to add the legs back on, pop some felt floor protectors on the legs,
and I'm going to be sealing the wood and the paint with this Fusion beeswax hemp oil mix.
This stuff is super easy to put on. I'm using a 1500 grit like very mildly abrasive pad to put it
on just to smooth everything out especially on the paint. I raided my hardware stash trying to
find the perfect hardware for this. I really liked the lighter iron color but I ended up going with
the flat black because I needed knobs for the top three drawers to match. By using this flat black
spray paint I was able to recycle the top drawer pulls and just paint them black to match.
Once everything was dry and reassembled I gave the whole piece a nice buffing. If you've been
following my Facebook or Instagram for a while you might be having deja vu. Earlier in 2021 I
had a dresser exactly like the one I'm working on now except it came to me painted quite poorly
actually and in really bad need of refinishing. I refinished it in quite a similar way with the
black paint and the wood on the drawers but I used brass pulls and I used a much much warmer
stain for the drawers and I can't wait for you to see today's version of the same style dresser.
After the reveal at the end comment below which version of this dresser you like better,
the March 2021 or the 2022 version. These blue microfiber wax pads were from my Amazon wish list
from Elaine Frank and I just want to say a huge thank you. This is my first time using them and
I love them. I had a few other wish list items come through over the Christmas holidays. This
is a roll of veneer and it is real wood veneer but it's very very very thin. It's almost paper thin
so there was no note in the box. I don't know who sent it. This is going to be great for like
lining the inside of a drawer. Looking forward to using it so thank you Mr. Repair. This next item
is actually a silicone glue tool so there's a little spatula on one end and sort of a silicone
brush on the other one so this is going to make it easy to do big glue ups. This is from Sushi
Girl on YouTube. Thank you so much. So this awesome screwdriver set was actually not on my wish list.
This was a Christmas gift from my honey so huge thank you for these. I'm excited to use these.
These last four items actually all came from the same person which is amazing. This was quite a
Christmas gift. I use these wax applicator sticks for stirring paint and mixing up the Orizoil.
This is actually replacement pad for my sander so coming over here to Mr. Dewalt and looking at the
bottom here, these little hooks actually wear out over time from friction and heat. They melt down
so the pads actually have to be replaced more often than the sanders and that's exactly what
this is. I go through about one a year. I love this little Dewalt box. I can't wait to put stuff in it
and this is super cool. I'm actually doing a work room sort of redo soon and this is a box of all
pegboard accessories so there's baskets and hooks just like I have up here on the peg wall now. I'm
looking forward to sort of revamping my space, having a better workflow. This is from Lee. Thank
you so much. This is so generous. Okay the time has come now. The big reveal. Let's have a look
at this crazy red dresser. Still solid and sturdy but definitely dated, needed some love and wow
what a difference. Let's have a look. Thank you for watching.
