This week we started Phase 2 of our Workshop makeover. We have had lot of visitors lately and thought we should add a retail display wall for our door hangers. This was a lot easier than is looks!
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
We just made this retail DIY farmhouse display wall and we'll show you how we made it right now.
What is up? Welcome back. Do you have to do it, build it, or make it? So do we. And we have a
new video each week. This week we're going to do something with this giant white wall behind us.
It hasn't always been quite this empty. We did clear out a couple of things but we haven't
done much with it since we built our workshop space. We intended for this to be kind of a
phase two project but we weren't sure exactly what we were going to do with it. Until we started to
get a lot of visitors. We love visitors. We love when people come in and hang out with us but they
have nothing to buy or do unless they're scheduled for a workshop. Right, well what we found is that
folks are coming in looking to purchase signs maybe for a gift. They've seen us at a local
craft show or even a craft show two hours away and they wanted to come in and get another sign.
Or they've seen us at a farmer's market and it's a weekday and they want to grab a sign. But I
didn't really have any retail space to display finished signs. Strictly a workshop. You want to
come in and paint your own sign. We got you. And you might not always have time for that.
So we did build our rope shelves. If you remember when we did our initial build of our workshop
space we have our rope shelves but they're displaying current projects that we're using
in the workshop so that hey oh look I love those can I come back and make those. But now I need a
place that'll display signs that you might give as gifts. Signs that are all year round signs or even
just like you said you might want to come get a sign and not have to paint it yourself. I think
I've got a pretty good idea of what we want to do. Go ahead. I think we should just use wire racks
with some hangers on them just like we do at our craft booth. That's what he said. He goes all you
have to do is use those same wire shelves that I have that we use for our craft show. We'll put
those graduated racks on them like you would see at a retail a clothing store and we'll hang them
on that. Instead of shirts we're selling signs. And I was like no no that is way too corporate.
We want something that's a little more rustic a little more sticking with our farmhouse DIY
theme. A little handmade looking. Yes. Yes. A little rustic look like we just
peeled some boards off of a barn. Yes so exactly.
Yeah so that's what I think I've got. I have a vision in my head. We have the supplies and we're
ready to build this wall and make it look like a fun kind of rustic retail space. Fun rustic retail
space. Step one. We're gonna gather all of our supplies. I thought we had a pretty precise
shopping list. We did. We did. I was like Garrett come with me to Lowe's. It'll be real quick. 30
minutes. We're in. We're out. We knew we needed 32 one by sixes. Six one by four furring strips.
Some nails and that's it. Now hour and a half later we've added one by sixes to the cart.
Added one by fours to the cart. Changed those out. Found the furring strips. Decided that the one by
sixes are too heavy. I was like let's use this quarter inch ply and we'll rip it down. Then I
decided the quarter inch ply was too light. We loaded five of those into the cart. Yeah loaded
those in. Unloaded five of those out of the cart. Found the three eighths inch. Felt like that was
better. So we loaded those into the cart. Hour and a half later we're in one aisle and we finally make
it to the registers. Yeah it was a very long aisle. A lot of project changes in that 90 minutes.
Well you know what I was I was enhancing the project. I was tweaking the design. Yeah on the
fly. Tweaking the design. Improving. Improving the design. That's really what I was doing.
I just decided that the one by sixes were going to be overkill. Yeah they were heavy and they were
thick and they were just going to be a bit much for this wall. Too much. Quarter inch. Too little.
Too flimsy. I was Goldilocks. Yeah she was Goldilocks in the wood aisle. I was but I finally settled on
three eighths inch and I think that's what we're going with. Well I know that's what we're going
with because that's what we purchased. So we got five sheets of three eighths inch pine plywood.
Then we got eleven one by four furring strips. We got some two inch self-tapping screws. Some
one inch self-tapping screws. Then we'll need some stain and paint. See it was easy. Yeah it was easy.
Step two. We're gonna make all of our cuts. We don't need to touch the one by four furring strips
at all. We're just gonna put those up at eight foot. But we do need to rip a whole bunch of five
and a half inch wide plywood strips. So I'm gonna stack all of the plywood together. I'm gonna try
to get them all lined up nice and neat using a picket and a hammer. Just tapping around getting
all of the little boards lined up. Then I'm gonna pin them all together using those two inch screws
that we got before. Those two inch self-tapping screws. I'm gonna put one in each corner and then
one in the middle on each side. That should hold it while I try to cut them all at the same time.
We wanted all these boards to be five and a half inches wide. And the guard on my circular saw is
an inch and a half. So we measured seven inches from the edge. We marked the line. We put one of
the one by four furring strips on there. Line that up with our marks that we just made. And then I'm
gonna screw that in so it shouldn't move. I can't clamp all of these. So I screwed that top piece in.
Now I'm just gonna run down with the circular saw. It took me like two or three passes to get
through each of them. I couldn't set the blade depth all the way and get through all sheets at
one time. So it did take me a couple of passes to get through all of them each time. But that worked
a lot better than I thought it would. I mean it was much more efficient by stacking them all.
We were able to get through all of those cuts in, I don't know, 30 minutes. It took me 30 minutes to make
all of the cuts. That's with lining up all the boards and everything. So not too bad. Once I had
them all ripped down to five and a half inches, I then took 16 and we cut 16 of those down to 88
inches. And then 16 of those we cut down to 85 inches. That way they'll fit on one side of the
wall and they'll fit on the other side of the wall. Step three. It's time to stain. There is a
ton of staining to do. Now that we have it all cut and laid out, I am a little stain intimidated.
Well you know that Garrett really doesn't do the painting and the staining. But I have to watch and
that's agony. Well he helped this time. There was a lot to do here. So we jumped in. We used our
stain sponge along with our Verathane briar smoke stain. We use this a lot. I just think it's a great
color. We put that on everything. We do. It is our Frank's Red Hot. So we use our sponge and the sponge
works great. These boards are a little rough because they are unfinished plywood. But we
ultimately determined that a sponge roller in the stain was pretty much faster. I thought at first
it was putting too much stain down. But I think it coated faster. And then as you wiped it off,
it kind of filled in the cracks and got nooks and crannies. So we had to stain each. We had to roll
the stain on all of these. Either stain it, roll it, and sponge it. I think we were using both methods.
And then wipe it on, turn around, wipe it off. A little stain on, stain off. Yes. Get each of the sides.
It was a lot of work here. I'm right-handed and my arm was burning. Burning. I could try to do it
left-handed but I'm not quite that coordinated. So I just had to keep chuffing it out with that right
arm. And then we had a process going. So you couldn't stop halfway through. No stopping. And mixing it up.
Yeah. You had to just stick with it and get it done. Take a break champ. Take a break. Thanks.
Step four. Time to paint. But not with a paintbrush. With a tape knife. So this is a technique we've
shown before. But it is a great way to keep that distressed look and quickly paint. Quickly paint.
All of these boards. We did all 32 boards in about an hour. Maybe it was just over an hour.
But really this method of just applying the paint to the board and using the scraping knife or this
tape knife and pulling the paint down across the boards worked great. Yeah I mean it's great. It
just leaves the paint in those little dips, nooks, and crannies. And then done. Time to go dry. Yeah.
We did have a process. We put them in front of a fan for a minute and then we would go set them
aside. Yeah it was a great way to give it that distressed look without having to do all of that
sanding. Step five. Time to attach the furring strips to the wall. We're going to use some two
inch self-tapping screws and my drill. But first we need to find the studs. So Kim's going to find
the studs because every time I touch that tool the thing just goes crazy. Yeah he doesn't. I can't.
He's not friends with the stuff out there. It just goes off. It goes off every time I touch it. And these are,
this is a commercial building so these are metal studs. These self-tapping screws work for metal
and wood. Step six. Time to attach the slats. We're going to attach these slats to the furring
strips that are on the board with some one inch self-tapping screws. And we're going to use a
piece of picket as a spacer in between each. We're going to start from the bottom and work our way
up using the spacer. Step seven. Now we have the accents. We're going to hang all of our signs
on the board using these little hooks that we found on Amazon. So the big side will go over
the board and then we'll hang like this. But Kim's got to fluff all the bows and do all the fluffing
stuff. And organize them. Organize them. All right what do you guys think? Came out pretty good right?
Yeah I think so. I think it came out excellent and it was a lot easier than I thought it would be.
So that's also a bonus. Well and I love that it's completely configurable. So I have all the signs
up here right now but I don't necessarily have to hang the signs up here. I could do any other
farmhouse signs. Any configuration. And I can move them around because they won't be permanently
attached to the wall. Yeah we could add baskets. We could even have shelves all using those little
hooks. So yeah I think that is great. Yeah I'm really excited about it. I also think our patrons
are great. Big thanks to all of our patrons. You know we love you guys and uh
we're having a patron zoom call this week. Yeah Wednesday. This is upcoming Wednesday.
Yeah Wednesday. I love those. Let's see how many people we can get on that one. I love talking to
you guys. We are about out of time so if you're not going to join us for the Patron After Show
we will see you next week where we'll do it, build it, and make it again. Oh and don't forget about
Test Cut Tuesdays where we usually test out a new design, try to paint it, put it together,
see how it looks, see if it works. All right seriously I gotta go. Too bad.