Why move your turned parts to a mill for secondary operations when you can machine them complete on a Haas lathe with the BMT65 Turret and Live Tooling? Not only will your shop be more productive and experience reduced setup times, but the BMT65 Turret and Live Tooling also provide increased cutting performance, longer tool life, and better tool clearance, when compared to older Haas lathe models. The BMT65 Turret and Live Tooling are standard on Haas Y-Axis lathes (ST-20Y through ST-35Y), and optional on non Y-axis models. Bonus Content: https://diy.haascnc.com
Haas has enhanced its Y-axis lathes with the new BMT-65 turret, designed to increase productivity and precision. By integrating base mount tool architecture, the turret offers greater rigidity, improved tool life, and significantly more clearance for complex operations, allowing shops to complete milling, drilling, and tapping in a single setup.
Haas has combined our high productivity Y-axis lathes with the new BMT-65 turret,
giving you the next step in Y-axis performance.
If you're considering a new Haas Y-axis turning center, you're definitely not alone.
A few years ago, 1 in 10 shops bought a Y-axis machine.
These days, nearly 5 out of every 10 turning centers we sell have Y-axis and live tooling.
Why is Y-axis becoming the new standard for general purpose turning?
Shops don't want to give up all the extra productivity that's possible on a Y-axis machine.
Why mill, drill, tap, or deburr on a second machine when your Y-axis lathe can do it all and finish the part?
Eliminate the inaccuracies that can creep in with multiple ops.
Save time moving parts and setting up from machine to machine.
And make complex parts in just one setup.
Choosing Y-axis just makes sense.
And with that in mind, Haas is pushing the Y-axis performance even further.
By integrating industry standard base mount tool architecture with our already rock-solid and robust turret design,
we get a turret structure that brings greater rigidity and clearance to live tool cutting.
With its 65mm drive shaft running through the center of the turret and wide mount stance supporting the tool,
our BMT65 turret gives you improved cutting performance and increased tool life.
Take deeper cuts and know your tool life will still be just fine.
On previous models, with the live tool drive mounted behind the turret,
it could interfere with the tailstock and limit the use of longer tools.
Now that all that hardware is gone, since we're driving through the turret,
you've got way more clearance when you're working at the bottom of X-axis travel.
How about an extra 5 inches of clearance on your ST-20Y?
That's a lot more room for that really long drill or when you're working down low in X on the sub-spindle.
You'll also be pleased to know your new BMT live tools are way easier to set up.
The tools self-align to the turret when you bolt them on.
No more indicating each one, hallelujah!
The standard BMT65 turret gives you 12 stations, all of which can drive live tools.
The optional 24-station half-indexing turret gives you 12 driven stations and adds half-station indexing.
Half-station indexing allows you to mount two static tools at one station with special half-index holders
and get to each tool with a half-step index.
And if you want live tooling, you can still get it optionally on your new ST-20, 25, 30 or 35 as well.
So to recap, what does the BMT65 turret equal for your new mid-size lathe?
Better cutting, better tool life, more tool clearance, easier setup
and best of all, it comes standard on all ST-20Y through 35Y and DS-30Y lathes.
Let Haas help you turn metal into money.