LIQUID-FILLED Shotgun Slugs - We TEST them out!

Ballistic Lab
1 follower
2 Video Views·Jun 30, 2026
You make it, we mach it is where our viewers submit wild shotgun slug designs for us to test out and we film them with a high speed camera. It's a lot like rocketry on a tiny scale. The slugs must meet design specifications to work properly. Other than that, the sky's the limit and the designers come up with some of the most complex and strange slugs they can imagine.
AI Generated·May contain errors
You make it, we mock it, is where we test the coolest, wildest, deadliest 12-gauge ammunition
ever imagined. These are all prototypes and you get to see it tested for the very first time.
Hello everyone, this is Jeff of Tal Flair, MLC. We have a very cool slug to test out today from a
brand new slug designer, but he's a big contributor to the channel as he designed
the Bryan from Cincinnati remote trigger device for our shotgun rest.
Bryan, who is a talented machinist, decided to take a walk on the wild side and come up with
his own slug design. And check out this wooden crate. It's kind of a G.I. Joe ammo crate that
he created out of wood. It's pretty cool and he gets extra style points for that.
And it's laser engraved, calling these the H2O No Slugs. We got a little pig pad there,
you may recognize that if you work in the industrial world. And that folks is what the
tops of the slugs look like. Let's take a better look at them. The slug is 68 caliber, measures
about one and a half inches in length, and it is mostly made out of aluminum with a steel head.
The slug has four notches milled down the side, and those are designed to create a weak point
so that when the slug impacts something, it bursts open at those points. At least that's the plan.
Now what's really unique about Bryan's slug is it has a little fill plug at the nose,
and the slug can be filled with water or other liquids. I talked him into letting me try other
liquids by the way. I might be getting this wrong, but I believe it has a capacity to hold
about four cc's of fluids. This is a close-up of the base, you can see that he has milled a slot
into the base of that. You can see the boat tail design, the beveled tail there. And you can kind
of get an idea how deep those grooves running down the side are. The wall thickness at those
deepest points is very thin. Now the steel head or nose is the front of the slug, but Bryan and
I did a little bit of discussing and agreed that we should test these backwards also. Now sometimes
great discoveries are made by doing stuff like that, but we also get a lot of comments asking
us to shoot slugs backwards to see what they do. Now as far as the fluids go, we'll try a couple
with water, both forwards and backwards. And then we have a couple filled with ink pad ink.
We have two filled with peanut oil, again both forwards and backwards. And then because I know
people would suggest it, we have three of them filled with gasoline. Now I've been rambling on
long enough with all this important information, let's head out and see how Bryan slugs performs.
We'll start out with the water filled slugs, then move on to the ink filled, and then we'll try out
the more viscous peanut oil. And then finally we'll test out the gasoline filled slugs. The first slug
is the forward flying water slug. H2, oh no! The slug is flying beautifully at around 1400 feet
per second. Beautiful stability, good spin from the rifling spinning at around 28,000 rpm or so.
But it shot low and I have to take credit for that, or take the blame for that, because I did
not have the butt of the gun clamped down very tight. It just kind of was flopping around there.
So I'm lucky I hit anything at all. It's definitely better than a complete miss,
at least we hit something. And then this is what the damage looks like. We actually blew a big
old hole in that expanded steel mesh on the top of that table from that water blast and from the
shrapnel too. So at least we got some kind of results. A lot of damage to that frame there too.
Now let's see what it does when we shoot the backwards flying water filled slug at the same
target. Now with the slug flying backwards we did not get very good stability. It's spinning really
well, but we had terrible accuracy and just out of the grace of goodness it hit nose first or tail
first. But once again I'm kind of glad we hit something. A complete miss would be a complete
disappointment. Now the placement of the impact was very similar to the first shot. Hitting the
steel frame and again blowing another hole in our table. Now you can imagine how many thousands of
psi of pressure is blasting out of the sides of that slug on impact. So I kind of think that's a
kind of a good result there. It kind of shows us what these things can do. Brought the table about
five yards closer and we'll be shooting one filled with ink. This is a forward flying one with the
screw at the at the nose. And let's see if we... I'm also aiming a tiny bit higher. Now it's very
possible the fluid in there is is what's really screwing us up here. I'm not sure yet. We haven't
figured that out yet. Let's see if this will solve our problems and we can finally hit that lead plate.
There we go. Almost dead center. And finally we hit the lead plate folks. Wow only took three shots.
But uh I used ink in this one because it's a little more viscous than water and it also is
nice and dark so you can see the splash a little better. Let's take a little closer look at the
damage. That's more like it. I'm getting a little happier now. I was starting to get a little bit
depressed there. But you can see that we have a splattering of the ink. It's all over the place.
It's almost dry. Oh boy why'd I do that? Got the projectile lodged in the plate.
It was only about... I was aiming about right here. So these things are definitely shooting low.
I think we figured out that. Nothing out of the back. Maybe a little tiny bulge. That's about it.
But that's a that's a chocolate mess there as the kids say. We know that the slugs burst pretty
well when they hit a very hard target. But next we'll shoot at a softer target. This is a stack
of wet catalogs. This one is a backwards flying slug full of ink. Okay still aiming a little tiny
bit high. Wow see light right through that thing. Okay still aiming a little tiny bit high.
Now this is a really weird one. I never would have guessed it flew like this. It
was very unstable at the beginning. Then it smoothed out and stabilized.
And it ended up surprisingly hitting very accurately on the wet catalogs. And then it
penetrated. And behind it we have a steel plate which kind of represents maybe a bone or something
like that. But it's it's really looking like the backwards slugs are not the best option.
So we're gonna have to flip all the ones that we have backwards to make them shoot forwards. Okay
I did find the end of it. It looks like there was just a press fit. So I'm kind of surprised
those are staying on. I thought maybe he had threaded those. But that one was also flying
pretty wonky. It was accurate. It was super accurate. But it was not flying like we like
as he saw the other ones fly. So I think I'm gonna have to switch out.
Shooting them backwards is not the way to go. I know we're getting good engagement here. These
are the Sabos. They're in beautiful shape. You can see the the rifling embossed on there.
So we know that we're getting good engagement with the rifling. It's a good tight fit. He made
just the right specs and everything like that. This is about where the center of gravity is on
the slug. These are definitely designed to shoot nose first. But we still we had to try them
backwards to see what would happen. But you can see that because it is so nose heavy it's very
difficult to stabilize these flying backwards. So it's kind of interesting. So anyway let's look at
the target. As you can see, you know, you know it went all the way through. I'm not sure if it
burst inside the target or not. Here's another piece of the slug. The nose of it. We captured
that. The rest of it seemed to have a burst. So maybe those fracture lines are working.
That's very interesting. But did it burst in the in the catalogs?
I'm not seeing any ink. That's why I use ink is to try to determine if it's going to burst. If it
was just water you would never know. I don't think there's any signs of it bursting. Oh wait,
this is the back side. So it made it all the way through then it hit the plate and burst open.
So that's basically what happened. You can see that's a that's a big old mess there. Still
it's a little bit wet. That's just ink from an ink stamp refill thing. But it did burst in the
target which is what we were hoping it would happen. Okay this is a forward flying peanut
oil one. I use peanut oil because it has a higher viscosity. I wanted to see what different
viscosities of fluids how those will interact with the the spin. Even at the Williams cartridge
company sticker there in the middle. Here we go. Geez. Now in this shot with the corn oil we had a
premature rupturing of the slug. And it left a very cool trail of oil mist in its wake. The slug
seemed to be stable flying still and it actually penetrated our mild steel plate. Now it's possible
that in this shot I when I filled it up with oil I did not leave any air bubble at all and it just
hydraulically split open. I think that's what happened here. It's still pretty cool though.
One of the weirdest effects I've ever seen. It left a big old cloud of peanut oil. I can't tell
if the nose of it came off. I'm not sure. I'm not sure what happened there. Maybe once I get home
and study the high speed we'll see. But there's the projectile. Now it certainly appears that it
hit. There's the back. Hit nose first. There's the damage. Nice big hole there. Accuracy was pretty
decent. Nearly punched out a slug from that 316th mild steel plate. That is wild. There's a closer
look at the slug. You can see how it ripped on those. You can also see how thin those mill slots
were. Very thin. So it might have ruptured in the barrel. Leaked out. Because something significant
you know the nose had to have been to stay intact in order to knock out a hole like that. Aluminum
isn't going to do that. Steel that steel nose is going to do that. Very interesting though.
Okay this is another forward facing peanut oil. Mr. Head meet Mr. Peanut.
And finally we're able to show you the real impressive accuracy of these slugs.
Now that I know where to aim them and know that flying forward is the way to go. Right between
the eyes of this ballistic gel head and inside the head is a bottle of soapy colored water.
And using that gives us a little time delay reaction there before the the fluids inside
the head starts spewing out. It's kind of cool. Now it appears that the slug penetrated the head
and hit the steel plate behind it and burst open at that point. But it is possible if
you know you're again if you're shooting at something with bone in it the bone would be
dense enough to cause it to burst open internally. Okay I think flying forward is the key to these
things. I feel bad for wasting the backwards ones. But at least we know now. It seems like all the
backwards ones were unstable. Now hit it right between the eyes. Really nice shot there. I don't
think you can see any trace. Here's the exit. And then it had enough energy to get a closer shot of
that. Looks like you actually see the screw head and the markings on the screw head.
They still have quite a bit of energy after going through that
ballistic gel. Okay now we're going now we're down to the gasoline ones or petrol or as the British
say motor spirits. Those British. Next they'll be calling soccer you know football or something.
So anyway we're aiming at that little red piece of tape on that half inch mild steel plate.
What we want to see is we you know this is an even lower viscosity fluid. It's possibly
flammable but I don't expect to see any flames. But I've been surprised before. Let's see what
happens. We know that will cause it to burst open. Is that compression enough to ignite it? I don't
know. I didn't saw no flames. Another beautifully flying accurate slug hitting the red tape. Very
good job Brian. And it does look like we got a little bit of combustion there. Just a little
flash of the gasoline. Not much but I'll take it. Now we can see the nose of the slug flying
off to the right and the base of the slug the aluminum base is flying upwards right there.
The rest of it just kind of split open and disintegrated. Now we didn't get a whole lot
of damage to our half inch mild steel plate. A nice little little impression right there and
you can see the screw marking and all that like before. Now next we'll shoot at an AR500 plate
and we do have a little fire going on right there and we'll see if we can get a fireball
out of this thing. Come on! That's what we came here for right? Well we gave it the college try and
it still did not ignite even though we blasted that little flame with a big cloud of gasoline
fumes. Maybe it blasted it so hard it just extinguished the flame. Who knows? Okay we have
one more test. Yes the good old ballistic gel. Ballistic gel! Hit it! Ballistic gel! Hit it!
The ballistic gel shot was very similar to what we saw with the wet catalog's full pass-through
and then it burst when it hit the steel plate. I had a little angle on the plate to deflect it away
from me and that thing ended up flying off into the weeds and I was not able to find that one.
But fortunately we were able to get a glimpse of it and what a kind of condition it was after it
hit that steel plate. Kind of opened up like a flower and overall it was a very interesting test.
I think I got my powder load just right. It was just on the verge of bursting when we shot these
things. We had one example of that and overall it was a fun test despite a few little failures.
Well there you have it. Hopefully you can see that track and there's not a lot to see.
It just went straight through hit the plate right here and it seemed to burst. It didn't burst inside
the block like we were hoping. It took something you know very hard to cause it to burst open.
The block slows it down quite a bit so it's possible if you shot an animal or whatever
living being and you hit a bone with that it would burst open. But through the gel it's just too
gentle. Not dense enough I guess to cause it to burst open. But another
perfect emboss of the screw and the nose of it right there. Anyway stick around because I do
have a kind of a sad actually a really sad announcement to make about Evan Perry and his
family. Now from what Evan told me he had an adopted son named Zach. Apparently the kid had a
lot of previous baggage. A lot of demons going on from before he was adopted. Abuse and neglect and
all that you know nastiness. Unfortunately things got just too rough for the kid and right before
his 15th birthday he took his own life. Evan and his wife Jessica tried to do the right thing and
bring this kid into their home and nurture him but things just went completely wrong way. Now
they have set up a GoFundMe. They do need some financial help. If you're able to consider
contributing to their GoFundMe we'd all appreciate it. Thank you.
