On today’s Tip of the Day, Mark shows how the Haas DWO/TCPC option can greatly simplify 3+2, 4+1, or simultaneous 4- and 5-axis jobs. By using DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control), you can now create your CAM program ahead of time, and then place the workholding and part anywhere on the table, with no need to repost your program! If you’ve ever been frustrated by having to repost your program every time you set up the job, this video is for you.
Interested in DWO/TCPC? Visit http://ow.ly/NR2Q30mTuac to contact your local Haas Factory Outlet today!
Don't miss any “TIP OF THE DAY” videos. Click here (http://ow.ly/s28l30mTiUo) to join our email list!
If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks! Follow Haas: Facebook – / haasautomationinc Instagram – / haas_automation Twitter – / haas_automation
AI Generated·May contain errors
Video Summary
AI Generated
This video demonstrates how to program simultaneous five-axis movements by hand using Tool Center Point Control (TCPC). By replacing standard tool length compensation with G234, the machine automatically calculates the necessary axis movements to keep the tool tip at the programmed location regardless of the part's rotation, significantly reducing code complexity and setup time.
Hello, and welcome to this Haas Tip of the Day.
Today's gonna be a lot of fun.
We're gonna program a full, simultaneous,
five-axis part by hand.
Here's our part.
It's a four-inch square block.
Now, I've already written a program
that's simply gonna take my engraving tool
and walk around the top corners of this four-inch square.
Now, on a UMC, if we were to make a rotary move
while walking around this block,
the rotary would collide with our tool.
To program this with a CAM system,
you would need thousands of lines of code
that simultaneously move the X, Y, and Z axes
at the same time to keep the tip of my tool
at the correct location on the part at all times.
Now, we're gonna edit this simple program
and show you how to use TCPC
to make simultaneous fourth and fifth-axis moves.
Now, the part of the program that shows the X, Y moves,
it's only four lines long, Y4, X4, Y0, X0.
Let's watch it run.
To turn my basic program into a full five-axis program,
we're gonna change my G43 into a G234.
G234 is a code that calls up tool center point control.
Now, when we add rotary moves to my program,
well, rather than explain it, let's show you what it does.
This time, the entire world is moving.
With TCPC, the tip of my tool
is staying at the exact X, Y, Z location as programmed
even though the part is moving about in space.
Now, it doesn't even matter what rotary positions I put in
as long as the tool doesn't shank out on the part,
I can put in anything I want.
B-20, I'll throw in a B-30 over here.
I'll throw in a B-15 here and a C180.
Now, my rotary is moving all over the place,
but the tip of my tool is still following
that same X, Y, Z location on the part thanks to TCPC.
Okay, so this is cool for a couple of different reasons.
One, it's gonna save thousands of lines of code.
And two, the machine is holding my work coordinate
to my part and not to my machine.
It's doing all of the math for us.
So this means that you can program your part
using TCPC and DWO and have someone on another shift
set up and run that part.
This is a big deal.
Watch, this is the same program, zero edits.
I'm pulling out this vise and replacing it
with an entirely different vise,
different position, different height.
So again, thanks to TCPC, all I did was probe my new part
in the new vise and run the program.
We've even put the code up on the screen
to show you that I didn't change a thing.
Well, we ran this part on a UMC machine.
You can actually do the exact same thing
if you've got a vertical and the next generation control.
We've got a trunnion here and you can take that same part
and program from this VF6 and put it on your VF4
if you've got the TCPC DWO option on your next gen control.
So we programmed the full five axis part by hand
and then we moved that part from spot to spot
using different vises.
This was all possible because of TCPC.
TCPC and DWO are easy to use
and they make the machinist's life easier.
That's it and thanks for watching this Haas tip of the day.