Casting a $20 Million Mirror for the World’s Largest Telescope

Basic Applied Science
14 followers
1 Video View·Jun 22, 2026
The European Extremely Large Telescope (ELT), whose mirror costs approximately $20 million, is cast from a special ceramic glass. The process, which took many years, required extreme precision to create a nearly perfect surface, enabling observations of the
AI Generated·May contain errors
Video Summary
AI GeneratedThe Giant Magellan Telescope aims to be the world's largest astronomical observatory. To achieve a 25-meter optical surface, engineers are casting and polishing seven massive, off-axis mirrors. This complex process involves precision casting, honeycomb structuring, and nanometer-level polishing to create a coherent surface capable of unprecedented deep-space observation.
These mirrors are the most challenging large optics ever made. So that's why we're here at
this special facility. The Giant Magellan Telescope is, it's our aspiration to build
the next great astronomical observatory, the world's largest telescope. So the goal is to
make a single coherent optical surface. We'd like to make a 25 meter mirror. So if we knew how to
make one mirror, 25 meters in diameter, and then get it to the mountaintop, that's what we would
do. But we can't, so we cut it up into small pieces. And six of those seven mirrors are off
the axis of symmetry of this 25 meter diameter parent surface. In order to make these off-axis
optics, the first thing is you have to cast them into the right shape. So what happens here at the
U of A is first they build a furnace, which will melt the glass. Then they build a mold that will
give us this mostly empty honeycomb shape. We melt all the glass, we spin the furnace, we then cool
the glass to freeze in this shape. You have to carefully cool it for a few months to anneal out
the stresses. When the mirror is cooled, you know, it's this sort of 20 ton piece of glass, but inside
it it's got another roughly 20 tons of mold material and the silicon carbide bolts and tiles
that held it to the ground. They lift it up, they move it over, and then they turn it so now it's
hanging vertically. So now you've got this 40 tons of glass and mold material hanging on this frame.
And the first thing they want to do is get all that mold material out of there just to lighten
the glass. So they go from 40 tons to 20 tons in just a couple of weeks. Then this same lifting
fixture is turned face down and the mirror will sit on that for the next year while we machine
the back surface flat, polish it to make sure it's structurally solid. Then there's a long process of
processing the blank until we're ready to start polishing the front surface. And it's very difficult
to polish because it's a long way from a sphere. So there's a lot of clever optical engineering that
went into using fold mirrors and redirection of the beam so we could do an on-axis test for an
off-axis mirror. And that final polishing process to get that precise optical shape that differs
from the sphere, that takes about 18 months. That'll get us down to nanometer level precision.
And then in 2023, we should have the telescope
on its concrete pier inside the rotating 22-story building.
We'll put those mirrors in the telescope. We'll start to look at the stars for the first time.
