Which first telescope under £150 / $200 Skywatcher Heritage Onesky AWB 130 Video 3: Simple Mods

Inventions and Inventors
25 followers
2 Video Views·Feb 9, 2026
Hi, this is Graham from Jennings Astro. This is the third video in a series about this telescope,
the Skywatcher Heritage 130P, which is also sold as the AWB-1 Sky. Now in the first videos we
concluded that it's great value for money and it would make a great telescope to get started in
astronomy. Now in the UK it sells for under £150 and in the US under $200, so if we're going to
make any improvements to it we need to do that considering our initial outlay. So the idea of
this video is to make a couple of budget improvements. We're not going to spend much
cash and we're going to try to improve the telescope a little bit. So modification number
one is to introduce a light shroud. What's that? It's one of these. So if we go back to the basic
telescope, when it's delivered you'll recall it looks like this. It's a truss tube Dobsonian,
which means that these parts here result in the front of the tube being open. Now normally this
isn't a real problem. We're using the scope at night and this design works very well and allows
you to shrink the telescope down to a small size for storage. What you can find is because this
part of the tube is open then you can experience stray light if you've got maybe a neighbour with
a security light close to where you're observing or more importantly you can have problems where
you get condensation onto the exposed secondary mirror. Now mirrors, they're really magnets for
condensation. They get cold and if you use a telescope outside for not very long really,
especially during the winter months, then the condensation can spoil your view. So the idea is
to produce a cover or a shroud for the front of the telescope and the main benefit is going to be
to reduce the susceptibility of the telescope to dew but it'll have an extra benefit of reducing
the effect of stray light. So how do we make a shroud for the scope? Well I went down to a local
craft store and I bought a few sheets of this. Now this is very lightweight, it's two millimetre
thick foam sheets. They sell it in A3 and A4 sizes so I picked up a few A3 sheets like this.
Now in the UK these cost £1 each so hopefully you can see straight away we're not looking to spend
much money. So one of those sheets isn't quite enough to go all the way around the outside of
the tube but at this price you can easily pick up a few and experiment. So that's what I did.
Initially I made a shroud that went all the way around the outside of the tube. It involved
sticking a couple of sheets of the foam together and cutting out a couple of shapes here to allow
you to use the focuser and go around the red dot finder. Now with this arrangement
the shroud goes around the outside and is attached. I've just put a bit of velcro
onto the edge so you get you get this sort of effect and it basically works but it's not very
pretty and secondly you've got to take it on and off every time you want to put the scope away if
you want to shrink it back down to its smallest size. So there's a better solution and that's to
produce a light shroud that fits inside the tube. So this is it. Again I've used two sheets of the A3.
It's actually really about a one and a quarter sheet you need and I've made a cut out for the
focuser and a little one here for the secondary vane and that's really it and I've got some velcro
on the edges as you can see here.
So all we're going to do is roll up the tube
and then put it inside the main tube of the telescope and then feed it forward
as we as we unroll it some more and then on the front of the tube line up the cutouts that we've
made for the focuser and the secondary vane line them up and I've put a couple of bits of
the velcro on to secure it
like so and then the acid test really is to see whether we can open and close the shroud.
So there you go nothing nothing snagging
all seems quite secure and if I turn it round hopefully you can see
that it's quite an effective shield. Obviously you've got a whole way you've got to let the
light come out from the secondary mirror to the eyepiece which is here but generally it's
it's cut off a lot of the sources of stray light and it should improve the tolerance of the scope
to due. So it's cost us all of about two pounds with maybe another pound or so wastage for the
first version that didn't make the cut but it's a very cheap way of improving the telescope.
Okay so the second modification is to the focuser. Now you might recall that this is
a slightly unusual design it's called a helical focuser and as you turn the focuser the eyepiece
moves in and out on some threads. Now a lot of talk about improving this whether you could
replace the focuser entirely with a more conventional rack and pinion arrangement
or whether you could whether the tube is strong enough to take any weight or something like that
and I say don't bother. For the price of this scope you've got to bear in mind that nothing's
perfect so you want to look to make whatever improvement you can make with a minor investment.
So what we're going to do is we're going to try to reduce some of the play that you get in this
mechanism. So what do I mean? Well if you're focusing on an object that's quite close to the
quite close to the telescope maybe during terrestrial observing then you'll notice
that the eyepiece is going to reach focus quite a long way outside the tube like this
so then the eyepiece rocks on those threads so we're going to try to improve that.
So all we're going to do is we're going to get a roll of PTFE or plumber's tape
and we're going to wrap that around the threads of the focuser.
So the idea being that the tape will go inside the threads
like so and it will take up some of the play that's inside the mechanism.
So when we finish we're going to put the focuser back inside the tube and we're going to
tighten it down and straight away you can feel that there's less play as you might expect and
then if you give it a few turns just to bed it in like so then let's see how it compares.
So we take an eyepiece put it into focuser and we put it in a similar sort of position that we
had before and clearly the side-to-side play is quite reduced so definitely a little bit of tape
like this can improve this part of focuser movement. So that's it a couple of simple mods
for hardly any money. We started with a good telescope and we made it just that little bit
better. I hope it's been useful. If you'd like to see more Astro videos from the Genyms Astro
YouTube channel please press the red subscribe button and thanks for watching.
