If you’ve ever experienced a rat’s nest of stringy chips wrapped around your tools, this video is for you! Mark shows you a simple way to throw those chips off the tool before they have a chance to build up, and reveals a cool new feature in the Haas NextGen control that can eliminate the problem altogether. Fling off those stringy chips now! Before they cause broken tools, damaged probes, bad surface finishes, or tool changer problems!
Don't miss any "TIP OF THE DAY" videos. Click here (http://ow.ly/s28l30mTiUo) to join our email list! If you enjoyed this video, please hit the like button and share it with a friend who'll find it helpful . . . and thanks! Follow Haas: Facebook – / haasautomationinc Instagram – / haas_automation Twitter – / haas_automation
AI Generated·May contain errors
Video Summary
AI Generated
This video explains the dangers of stringy chips wrapping around milling tools and provides several methods to prevent this issue, ranging from basic machining adjustments to advanced programming techniques using Haas Next Generation controls.
Hello and welcome to this Haas tip of the day. Now have you ever walked through your shop,
looked up at the tool carousel on one of your mills and seen something like this?
This is not good. This can cause all kinds of problems and that's what we're going to
show you today. We're going to show you how you can get rid of the stringy chips on your tools.
So we've got a tool that's got chips wrapped around it. How big of a deal can that be? Well
it can be awful. If we do a tool change with a tool in the spindle that's got chips wrapped around
it, those chips could get caught up in the tool change arm and cause a fault. Worse than that,
if those chips catch a hold of my probe in the tool carousel, we could have problems with that
as well. Also, if we have a big ball of chips wrapped around our tool, those act like a force
field keeping all the coolant away from our cutting edge. Our tool is going to wear out
prematurely or worse than that, it could break because it's running dry. On top of this, we've
all had parts that ended up with great big swirl marks across the face as those chips dragged across
the surface. This isn't good either. Okay, we understand what the problem is and we know we've
got to fix it. Now I would usually start with my feed rate. Increase that feed rate. Try and get
those chips to break. Next, make sure that you're using the right can cycle. Use a G73 or a G83 can
cycle to peck drill. Try and break those chips that way. Next, make sure that your coolant nozzles
are adjusted just right to knock those chips off and out of the way. Finally, if you're still having
problems, talk to your tooling supplier. Make sure that you're using the right tool for the job.
Now a lot of us are working in job shops and we just don't have the time to wait for new tools.
What do we do then? Well, we're going to program our way out of this problem.
Now we've created a simple part and drilled a series of holes. We then came in with a right
hand helix end mill, plunging to create some counterbores. Now this created all kinds of
stringy chips. Those chips got stuck around our tool holder one at a time until they built up
into that rat's nest. What we're suggesting is that we actually reverse the spindle direction
between each hole. This is going to spin off those chips before they have a chance to build up.
Now we can program this manually. All we've got to do is reverse our spindle after we've drilled
our hole. Then we dwell, giving the tool enough time to throw those chips out of the way.
Now if you're doing this, make sure that your clearance plane is far enough off the part
that the chips have room to escape. Now we program this manually. If you do it this way,
you've got to add that spindle reversal and the dwell after each and every hole.
If we've got the latest version of software on a next gen control,
all of this can be done for us automatically. All we have to do is add an E value to our
drilling or tapping can cycles. I'm going to add an E 2000. What this is going to do is stop,
reverse the spindle at 2000 RPMs in between each and every hole so those chips never have
a chance to build up. Normally that spindle reversal is enough to throw the chips from
your tool. Now if you'd like to give those chips some more time to escape, all you've got to do is
make a change to setting 306 on your next generation control. With this change, your
tool is going to dwell for this minimum chip clear time in seconds before moving on to the next hole.
We've given you another tool for your toolbox. If you ever end up with chips wrapped around your
tool, reverse the spindle. Or if you've got a next gen control, just add an E value to your
can cycle and the machine will do it for you. That's it, and thanks for watching this Haas Tip
of the Day.