Mastering light and shadow is the ultimate secret to creating depth in design soap. In this comprehensive soap tutorial, I’ll guide you through the intricate process of crafting a realistic Cave Soap, ensuring your work looks like a 3D masterpiece rather than just simple layers.
We’ll explore the essential soap making principles of "Chiaroscuro" why the cave edges must be darker and how a 4.5:5.5 ratio between the sky and the cave creates the perfect perspective. This video covers everything from preparing #naturalsoap colorants like cocoa powder to managing specific trace levels for precise piping.
Whether you are a beginner or looking to refine your cold-process soap techniques, these key points will help you transition from "stripes" to "scenery." Learn how to control saturation and use highlight colors to define borders, turning a simple bar into a breathtaking piece of soap art. Elevate your hand made soap journey and challenge yourself with this professional landscape technique!
📍 What You Will Learn: Shading Mastery: Using cocoa powder and titanium dioxide for professional depth. Trace Control: How to maintain the ideal viscosity for sharp, clean cp soap layers. Composition: The secret to creating a natural arch and the perfect "Moonlight" effect.
[Cold Process Soap Shading: Cave Soap Tutorial] [00:04] Cold process soap: Shading principles & Golden ratio [00:53] Cold process soap tutorial: Base dough & Cocoa color mixing [01:34] Color preparation tutorial: Sky & Ground base [02:49] Creating gradients for Cold process soap shading [03:39] Cold process soap tutorial: Layering & Piping techniques [04:41] Advanced tutorial: Sky details & Highlight lines [06:58] Cold process soap: Arch design & Moon placement [08:36] Finishing tutorial: Stamp & Texture details after cutting
AI Generated·May contain errors
In design soap making, everyone knows how important light and shadow are.
However, when I look at beginner soaps, the shadow often looks twice,
or the colors are layered without any other.
Good shading makes even a small soap look more three-dimensional.
Today, I will share the key point for making a cave soap.
A cave should always get darker toward the edge.
The center where the main scene is should stay bright.
And since the sky has the sun or the moon, the cave edge needs to be dark.
Use roughly a 4.5 to 5.5 ratio for sky and cave.
We have a ground layer, 6 colors for the sky and 4 for the cave.
You can check exact amount throughout the video.
Prepare 10g of cocoa powder.
And mix cocoa powder with small amount of make your dough.
Stir below 30 degrees Celsius.
And bring it to about 1.5 trace.
You should see a thin but clear trace line.
Now measure the ground and 6 sky colors.
Add titanium dioxide to the ground colors, but not to the sky colors.
The ground shouldn't stand out more than the sky,
so I will tone it down with a bit of black.
Please remember, don't add titanium dioxide to the sky.
Keep adjusting the gradient so the colors blend smoothly.
Keep the light colors clear and lower the saturation of the dark ones.
Now it's time to measure the cave colors.
Dark 200g, mid-tone 180g, light 180g.
And prepare 40g for the highlight colors.
Add titanium dioxide only to the highlight.
Next, we will mix the rest of the cave color for light and dark.
Remember cocoa powder darken after insulation.
You should see clear difference between each shade.
That's what make the final result look smooth.
At this point, the trace is going fast level 2.
Transfer color into piping bags.
For the sky, only put in the first colors.
Split the cave colors into separate bags.
Start with the darkest color along the edge.
Layer the mid and light tones on top.
Leave about 5cm for the ground.
Fill in the ground completely.
Then continue filling the cave layers.
Pipe the first sky color originally.
Make sure the height fits the cave.
Otherwise, the sky layers will look uneven.
Use the same piping bag for all sky colors.
Use the highlight color to define the border.
And keep the highlight line thin.
As you go up, the sky get narrower and the cave spacing get wider.
Just repeat the same process.
The soap barrel is still at trace level 3.
Use more highlight color toward the top.
Keep an eye on the texture.
It should still feel smooth and soft.
The final sky layer is about 2cm.
Gradually make the sky layer closer together to create a soft, rounded arch.
Now place the full moon you prepared earlier.
Use a stick gently blend the highlight color so it connect smoothly.
Layer highlight, light, mid, and dark on top.
Finish the top neatly.
After cutting, I use a bottle cap to add light detail.
It's something you can easily find at home.
Mix a little titanium dioxide into your mica.
Then add ethanol.
Dip the cap and gently stamp.
You can apply different sides as well.
Ta-da!
And that's today's finished landscape soap.
I hope you give it a try.