Sep 29, 2023 MOSCOW For questions regarding restoration, you can message me on Instagram @restorer_ivan.
Restoration of a painting by the European artist Hueber, 1838, painted with oils on canvas 🎨. A comprehensive restoration project was completed. Patches were removed from the back, holes were repaired, dirt was removed, the primer and paint layer were reinforced, edges were reinforced, the stretcher was repaired, the painting was stretched, priming was applied in areas of loss, tinting was done, and the painting was varnished. The painting is now ready for display.
I would like to share the latest restoration of a portrait by the unknown Austrian artist Johann Huber, 1838.
He worked in Russia for just a few years.
He is now virtually unknown to the audience, and very little information about him remains.
Most of his works are portraits of unknown individuals.
And you can see in what condition the painting arrived for restoration.
The subframe is bent.
Over time, the subframe's brackets bent so much that it twisted like a screw.
Darkened stains, yellow paint, breakthroughs, soil loss, and loss of colored conditions.
You can see the caption on the background right now.
Signed by Huber, 1838.
Restoration or amateurish insertions are also visible on the reverse side.
which were made during existence.
And here I show the first stage of the restoration.
This reinforcement, that is, I am conserving the sections of the painting.
so that the picture doesn't fall apart further.
One of the earliest stages of painting restoration is consolidation.
And now I'm showing it.
I apply animal glue and special restoration paper to the edges of the losses.
First, I work in the areas where the colorful layer has flaked off the most and is most severely cracked.
Painting, above all, requires strengthening in these areas.
After the painting I'm gluing dries,
I am showing the process of removing restoration patches.
They were applied, possibly at different times.
because one fabric is dark green velvet,
A lighter, golden color is canvas or a fabric resembling canvas.
The most effective cleaning method for me turned out to be only mechanical.
because I was afraid of soaking the reverse side too much,
so that the paint on the front side does not start to peel off.
And so I gently removed all of it with a scalpel, clamps and tissue grafts.
You can see here the cleared area, and the breakthrough that has formed.
And I glue together the threads of the canvas, the threads of rupture.
And I also replenish the losses of the canvas.
A special restoration canvas.
If I fill in some large areas,
In this case, I am using it from the edge.
That is, I'm using the same canvas, and it's already primed.
And here comes the next stage after the breakthrough has been sealed—the clearance process.
I have carried out tests and selected a suitable solvent for this painting.
In this case, at first it seemed to me that it was yellowed and darkened varnish.
But it turned out not to be lac after all.
The painting is not varnished.
These were nicotine, dust, dirt, and surface contaminants.
There was no lacquer on the painting.
That is, perhaps at some point it was cleaned, and the painting had its varnish removed.
I'm repeating myself—the painting was already undergoing restoration.
Or maybe there was some home restoration or renovation.
because instead of breakthroughs, where the face and background are,
they stitched him up, canvas, to prevent,
To go further, the picture didn't tear any further.
Therefore, someone made the decision to sew up this spot.
So this is just a normal practice,
People, out of ignorance, would simply take it and sew the painting back together.
I show the cleaning first from the front side of the painting, that is, from the face.
I'm showing it to you right now.
After the face has been cleansed,
It was decided to dismantle the painting after all.
because the subframe was shaking very intensely,
There was no firm contact with the table.
The painting was also secured using covers made of some kind of argolite.
Yes, it was indeed argolite.
And nails that were long and thick enough.
I am showing the process of removing the painting from the stretcher.
And I continue the clearing process,
the removal of this yellow layer of nicotine,
which arose during the thing's existence.
The painting was sufficiently well-preserved for its time period.
because sometimes things happen, like this painting from the first half of the 19th century,
The preservation is sometimes much worse.
Here, I want to say, it's sufficient, if one does not take into account that
What is the painting? These breakthroughs are huge.
There aren't many losses at work here.
Therefore, painting is sufficiently well preserved here.
And you can see how deep the dark blue is,
Such that, I don't know how Berlin blue paint was used.
or some Prussian blue or something.
Here, the frame was also gilded.
Her painting was not removed from its frame; it was simply covered with bronze.
And these layers of images were formed not only on the frame,
but we also ended up on another painting.
That happened quite often.
That is, they simply took the frame together with the painting and covered it with bronze.
And touched upon painting.
And thus, a deep blue color unfolded.
After that, the body color became quite pleasant, cool.
Also, I made a bar for the horizontal bar.
to make the subframe structure more rigid.
Made are the lost stakes,
because none of them have survived.
It was cut and measured.
And now I'm showing on video the tinting of the strip,
so that it would not stand out from the overall tone of the frame.
So that the gaze won't clash.
I covered her subframe rail.
I also tint the clips so they don't stand out.
And matched the color of the artist's mat.
After that, I apply the restoration primer to the areas of loss.
The restoration soil is not applied all at once, but in several stages.
Because, as a rule, soil settles gradually over time.
And still, somewhere you have to balance, somewhere else you have to adjust.
And after the soil dries, it needs to be washed.
That is, remove the excess soil.
I'm just showing this on video right now.
I remove excess restoration primer simply with water.
That is, I use a reversible ground sufficiently on animal glue.
And you can see how thoroughly he washes himself.
Once the foundation is in place, I proceed with overall reinforcement.
In addition to what was local.
That is, I performed reinforcement at the locations of soil and paint layer breaches and losses.
Now I'm performing a general reinforcement to restore elasticity to the painting and make it smoother.
For this, I first apply animal glue to the surface of the work.
After that, I apply animal glue to the painting.
Oh, not on the painting, but on the restoration paper itself.
After the adhesive has been applied to both surfaces, I lay down the restoration paper.
Here you can see how I apply the sticker.
I need to get rid of all the bubbles so there are none on the surface of the painting.
And then, after some time, the image can be smoothed out.
to let the picture stand a little with the glue.
And so that the animal restoration glue seeped into every crack.
And so that he could seal all the cracks.
I'm removing the excess glue.
After the painting has dried, I begin cleaning the back of the painting.
I had a special restoration compound prepared.
pH neutral.
And you can see how dirty the picture is over this period.
Dirt had accumulated on the reverse of the painting over nearly 200 years.
After this mixture has stood, I remove it.
It absorbs all the dust, dirt, and soot.
After the painting has dried, I proceed to the edge doubling.
That is, restoration adhesive was applied to the edge beforehand.
And then I iron it with a warm enough iron.
to glue two surfaces together
Why are the edges duplicated?
So that the painting can be stretched properly.
Because the edges are not long enough.
Therefore, edges usually need to be duplicated in most cases.
In this case, the painting is already...
I am removing the sticker from the surface of the workpiece with warm water.
The work has already been weighed down.
I got pressed.
It had become sufficiently smooth.
And here I show how I remove the sticker with warm water.
The paper is applied temporarily.
I am often asked whether the sticker is applied permanently.
No. It's a temporary measure, so to speak, to press the painting with the ground layer.
to the surface of the canvas and make it smoother.
So that she wouldn't be all raised up.
After the seal was removed and the painting had dried,
I will now stretch the canvases onto the already repaired stretcher frame.
The angles of the picture are combined.
Restorers use special nails for stretching the canvas.
And the work is carried out alternately.
Back and forth, now on one side, now on the other.
To prevent thread misalignment with the canvases.
Sometimes work is such that
She needs to stand for a while, and then she has to be pulled up.
Because, for example, the painting is duplicated,
There are two canvases present there.
Here is one canvas. Here I was only attaching the edges.
And sometimes dubbing is like two canvases.
And then she becomes very strict.
And sometimes you even have to pull yourself up.
That is, pull out your nails and already tighten them more tightly.
Because it can't be done all at once.
Pull out these two thick canvases.
But there were no particular difficulties here.
Here I show how I finish the edge on the reverse side.
In other words, the canvas bends under the stretcher.
And you can see how neatly everything will look, turn.
There will be no threads sticking out anymore.
It will all be beautiful.
Ah, and the frame became smoother.
Because the brace indeed provides additional rigidity to the structure.
And the support frame leveled up.
In other words, for such a format, it's better to make either a crossbar or a transverse bar.
After the painting is fully stretched,
I am already starting the final stage of restoration.
This is a glazing technique in painting.
That is, I am performing the loss.
The ground is leveled and made flush with the surface of the painting.
And I apply watercolor washes only to the parts of the painting where they are absent.
That is, I choose a color and mix the paint so that the loss won't be noticeable.
And several applications are always made with tinting.
Because it's very difficult to hit the mark with watercolor in a single attempt.
Therefore, you can wait a little while for the paint to sit and dry slightly.
Then another layer is applied.
Then it is dried again and paint is applied once more.
Therefore, applying tinting is a multi-layered, complex process.
Here, I am showing the eye shading.
A strong enough breakthrough.
The painting must have fallen or been damaged.
She was unlucky in her process of existence.
But it can all be fixed.
Restorers have done even more unusual things and restored them.
I'm tinting with watercolor.
And I restore the parts of the painting that were lost.
And I restore the drawing.
The most important thing is that the drawing matches.
And my tint didn't stand out against the general background.
This is the most important thing: to make your work as invisible to the viewer as possible.
Good here.
The eye was not seriously damaged.
And there's no need to make a strong, deep reconstruction.
Sometimes entire faces are lost.
Analogues are sought by analogy, if possible.
Either the original painting by the author is taken as the basis.
A reconstruction is made based on the artist's original paintings.
Because the portrait must be restored.
This is the main part.
The most important thing in a portrait is the face.
I show how tints gradually approach original painting.
By tone and color.
After all the tinting has been completed,
You will be able to give her the painting to dry properly already.
I'm already making the headband here.
I want to say that there are quite expensive jewelry items depicted here.
And perhaps this could be a bride depicted in a wedding dress.
Because there is a lot of grenade here, gold, pearls, and expensive jewelry.
This is clearly some girl from a wealthy family.
And the portrait was ordered.
And the painting is very professionally executed.
The work is very technically proficient.
This can be seen.
It was obvious right away.
I'm darkening the painting.
The head depicted.
And now I'm probably finishing my tinting.
I'm making it practically invisible.
This is a very time-consuming process.
It can even take longer than some other processes.
It is precisely with paint that one has to work.
Here I am now demonstrating the process of applying a new protective coating.
I cover it with a brush, glue.
To protect the painting from surface-level environmental influences.
And to display painting.
Because here, paintings are always varnished after restoration.
And now I'm reminding you what the picture looked like before the restoration.
What a dark, torn, dirty one.
She arrived in such a heavy state.
And you can see how much she has transformed during the restoration process.
So many processes have been carried out.
This is after the restoration.
What deep blue and what cool color appeared.
In which there were no shades.
They couldn't be seen.
Under this layer of nicotine.
And the painting became very beautiful.
Painting emerged.
Such a chill tone of the body.
Gold jewelry.
Gold looks very beautiful.
And here comes the twist of the picture.
Net turnover.
The needles were tied up.
Before and after the restoration of the painting.
Subtitle Editor A. Semkin Proofreader A. Yegorova