George Washington Gets Blasted By Lasers

Classical Artwork Conservation
262 followers
44 Video Views·Sep 5, 2025
Jul 22, 2024
Check out http://www.squarespace.com for a free trial or go to
http://squarespace.com/Baumgartner to save 10% off your first purchase of a website or domain.
--
When we were kids we were promised flying cars, teleportation and of course, lasers. Who hasn't dreamt of blasting something with a laser while yelling "pew pew!" Well, in art conservation we get to do just that. When presented with a particularly stubborn varnish and a very delicate paint layer the answer just might be a little pew pew.
--
Support me on Patreon
/ baumgartnerrestoration
Official Baumgartner Merchandise
https://teespring.com/stores/bfars-store
Follow me on
Instagram - / baumgartnerrestoration
Facebook - / baumgartnerfineartrestoration
This video is brought to you by Squarespace. From websites and online stores to marketing tools
and analytics, Squarespace is the all-in-one platform to build a beautiful online presence
and run your business. This painting of George Washington is likely a copy of a much more famous
painting, but it still deserves our attention and respect. But in its current state, it's really
kind of lousy. It's really, really dark and really, really dirty. There are some surface issues that
compromise our ability to see the painting and not just the surface. But ultimately, it just
looks drab, and for a man who was so important and had such an outsized footprint during his life,
well, his portrait should do the same, even if it's small. We can see all of that discolored
old varnish and surface grime on the painting, and we can also see that the surface is really
textured. And this could be a combination of old varnish and surface grime that's just been built
up over many years. And we know this painting has been conserved at least once in the past, so
who knows what was done to this painting. But our job is to figure it out and undo it
and put George Washington back together again.
Now, before I can find out just how grand the problems are with this diminutive little painting,
I need to start exploring. This painting is in a frame, and there's a backing board on the back,
which is covering up, well, the painting. And I need to remove it. And I'll start by taking my
pliers and pulling out these framer's points. Now, framer's points are basically little pieces of
metal that are shot into the frame with kind of a modified staple gun, and they hold the backing
board in place. And as I remove this backing board, just a piece of cardboard, I can see
the board to which this painting is adhered. And I try to get it out, but it's fighting me.
Apparently it's been glued or adhered or somehow affixed in, but eventually I do break it loose,
at least part of it. You can see that this board is not a perfect oval, and it's too small for this
frame. So they've added little pieces of board afterwards to compensate for the gap that was
visible when it was framed. All of this stuff needs to come off. And in order to protect the
painting, I'm going to face it with my traditional fish gelatin and washi paper. Once the fish
gelatin is heated up and melted, it is solid when it's in the refrigerator and cooled, I can find a
piece of paper. And here I'm using a heavier weight paper than normal because I think it's going to
help give some extra support onto this painting and also be easier to remove because it doesn't
disintegrate as easily as the thin stuff. So after tearing it to fit and then aligning it on the face
of the painting, I'll use a brush and some of this fish gelatin and bond it down in place. And I use
fish gelatin as opposed to rabbit skin glue or hide glue because it has a lower tack. It's an
adhesive and so it will stick, but certainly not as much as a hide glue or even a rabbit skin glue.
And now, over the course of a few hours, the glue dries and the paper becomes opaque, and we say
goodbye to George Washington. At least for now. He'll be back later after, well, after a journey.
This painting is going to be removed from this board, but unfortunately I cannot remove the
canvas from the board. The adhesive is unknown and unresponsive to any solvents or solutions
that I've used in the past. So I have to remove the board from the painting. And in this case,
it's just a compressed cardboard. Multiple layers of recycled paper compressed into one thick board.
And so using my scalpel and a myriad of other tools, I can slowly begin peeling back each layer.
It's a tedious process, but for a small painting like this, it goes relatively quickly. One layer
after another, the layers separate easily and reveal what's underneath. Once I've gotten it
down fairly thin, I can use my scalpel to shave off the last layer and the piece of paper to which
the canvas is adhered. And then I'm going to use some laponite, which is a synthetic clay saturated
with water. It basically gels water to remove this final layer of paper. Sometimes we use laponite to
soften adhesives. In this case, I'm optimistic, but well, I know better. It's not a water-based
adhesive. I tested that earlier. What I am doing is softening up the paper, turning it into
effectively pulp so that I can scrape it with my scalpel and reveal the adhesive layer. Once
revealed, then I'll be able to come back with a different mixture or solution and try to remove
this layer. Now, using a solvent-based gel, I'm going to apply it with a brush across the entire
back and let it sit for a little while and then start to scrape it up. And what I find is that
this is no adhesive. This is black oil paint. When they decided to mount this painting to the board,
instead of using an adhesive, which would be the right approach, they simply coated the back with
a very, very thick, maybe one and a half to two millimeter thick layer of oil paint and use that
as the adhesive. And so I have to remove as much of it as I can, trying to get down to the raw canvas.
After what felt like an eternity of scraping, reapplying the gel, scraping, and more, I've
removed all of the oil paint and now I can remove the facing with a little bit of hot water.
Painted on the surface, it penetrates through the paper and reactivates the adhesive. Once the
adhesive is soft, I can simply peel back this facing. And this is why I used a thicker paper.
Rather than disintegrating, it stays together and it's easier to remove.
Now this thicker paper doesn't always work. Sometimes I do need to use the thinner paper to
better to conform to an uneven surface. But because this painting was smooth and flat, this was the
right choice. With the facing all removed, I can start to think about cleaning this painting. And
of course I'm going to use a two-step approach. The first, removing the surface grime with a
neutral organic soap that I mix here in the studio. And even though I tested the painting
prior to doing any work, even writing the proposal, I'm still starting on the edge and
just working very slowly to see what happens. With one quick pass, we can see that there's a
little bit of accumulated surface grime, but not a ton. This painting is discolored and dirty,
but that is likely the old varnish and not an accumulation of dust or particulate or cigarette
smoke or all of the other lovely things that find their way onto the surfaces of paintings.
I'll work on the background a little bit more, and then I'll work on the face. And I'm using a
stiff bristle brush to agitate the surface. There is still a varnish layer on this painting,
and this soap does not penetrate that varnish layer, so the brush will not damage the paint
layer. But sometimes having a little bit of agitation on the surface grime helps break it up
and allows the soap to do its job more effectively. With all of the grime removed, we can now start
turning our attention to removing that varnish, and we can use different solvents to test to see
what's strong enough to remove the varnish, but safe enough on the painting. And even with the
first very mild solvent, this appears to be too aggressive, and so I'm going to have to find a
different approach to clean this painting and make a big pivot. And the answer, at least to this
problem, I'm hoping, is in this big box that arrived at the studio a little while ago. The
purchase of new equipment, toys as I call them, is always exciting because it means that my
capabilities are going to expand. What I'm able to do and how well I'm able to do my job
is about to take a step forward. And within this box is probably the most technologically advanced
piece of equipment I have in the studio. One that I never thought I would have the need for,
or ever thought I would procure myself. And this is my laser. Well, actually,
behind all of this padding and packing and wrapping material, there is a laser. And this
is an Erbium Utrinium Aluminum Garnet Laser. A mouthful for sure. Otherwise known as ERYAG.
This laser operates on the 2940 nanometer wavelength of light. And while we're about
to showcase this technology, there are other places where the tech is hidden
on purpose. But that doesn't make it any less cool. And that's one thing that makes Squarespace
so unique. All of their technology is invisible and seamless. Whether it's their new fluid engine
allowing drag and drop technology in designing your website, to their new AI engine which will
help you with your copy whether you want to make it longer, shorter, or just make sure it makes
sense. And of course, their e-commerce solution provides a simple, easy way to add an online store
to your business. And the best part about it? No coding necessary. Squarespace has done all the
heavy lifting for you. But if you ever do get overwhelmed by the tech, Squarespace has online
help guides, a robust forum full of users like you, and real-life people behind their tech support,
just in case you need it. So head over to squarespace.com for a free trial,
and when you're ready to launch, go to squarespace.com slash Baumgartner to save
10% off your first purchase of a website or domain. So why a laser and how do we use this
one in particular? As I mentioned, this laser emits light or energy at the 2940 nanometer wavelength.
And certain materials will absorb that energy. Materials with a high concentration of OH bonds.
And when absorbed, those OH bonds will be broken up and the molecular structure of that material
weakened, thus enabling me to remove that material with a milder solution or solvent,
something that would otherwise have minimal to no effect. Now using the laser, on the other hand,
is a little bit more complicated. There are no set protocols or guidelines for how to use it on
any particular painting. It's up to the conservator to figure it out as they go along. So I'm starting
off with a very low fluence. That's the concentration of energy on this little spot.
And I'm starting off with a very low fluence because I don't want to damage the painting.
I can always add more later on. Using the laser is a lot like using solvents in cleaning paintings.
We start off with something mild, make little tests, and then increase it as we need and see fit.
Now before moving on to the actual painting, I'm going to wet out the varnish layer.
And I can use any number of solutions or solvents. And again, a lot of it is trial and error.
And what this does is concentrate the energy pulse on the surface, preventing it from penetrating
through the varnish layer to the paint layer. With my fume extractor pointed at the test area,
I'm going to wet it out with the solvent that I've chosen. And then using the red focusing spot,
aim my laser and fire three test pulses. I can adjust how many pulses are fired per second,
but I found that three is a good number. Then coming back with a mild solution,
I can start to lift off that varnish. And you can see just the varnish comes off,
no paint, like before with a more aggressive solvent. So this is a successful use of the laser.
What we're doing is breaking apart the molecular structure of the varnish,
and then using a mild solution to lift it off. Previously, if we tried to use a solvent,
it was too aggressive. It would cut through the varnish and then affect the paint layer.
But here, we can avoid that by using the laser. I'll work in a relatively small area. This is
about one centimeter by one centimeter. I'll fire the laser pulses, and then I'll come back with the
solution and lift off that varnish. Now, if used successfully, we won't see any marks. You can see
that the varnish turns white when it's affected by the laser, but the paint doesn't. And that's
precisely what we're looking for and tells us that this approach will work on this painting.
Now, just like with the solvent approach, I'm working on an area that is confined and small,
and I've started on this area where I think I'm going to get a really good result
because I know how the shirt is supposed to look. It's supposed to look white and not yellow.
Really, using the laser isn't all that different than standard conservation approaches. It's just
a tool. It's not an answer to every problem, but it does fit into the conservator's toolbox when
all other approaches have failed. The use of lasers in art conservation dates back to the early 70s
in Italy, where they were pioneered. And since then, conservators have been using lasers, all
different types with all different wavelengths, for all different types of projects, from removing
old discolored tough varnishes like I'm doing here, to removing soot and pollution from sculptures
and statues. And while there's a lot of literature about how to use lasers in art conservation,
the grand takeaway is that really, it's just another tool, and everybody's got to figure out
how to use the tool effectively and safely and make it a value add to their practice,
which is both exciting and a lot of pressure. And just like with the solvents, once I've gathered
enough data about how the painting responds in an area that I feel comfortable working on,
I'll move on to the more high stakes area. And this is George Washington's face. So I'll continue
to wet out the varnish, apply the laser, and then remove it with a solution. And this is how I'm
centimeter. Imagine working on a massive painting, it would take weeks if not longer.
So I'm lucky here that this painting is small, and I can do it in one or two days.
With the painting now cleaned, I can think about how to return it to the frame. And the first thing
that I want to do is see how it fits in this frame. And right off, you can see that there are
gaps, and I need to deal with those. Previously, they just stuffed extra board in there and
overpainted it, but that's not what we're going to do. The first step in what I am going to do
is to trace the opening in the frame to get an idea of the site size. This is going to be the
dimension that I need to fill with the canvas. And I'm going to check to see if the original
fits this. Once I've got that oval traced, I'm going to add about a quarter of an inch around
the entire thing to compensate for the frame rabbet. That's the little ledge on which this
will sit so that it doesn't fall through the frame. I'm just going to eyeball it here on this
piece of paper. Using math isn't necessary here. It would slow me down. And welcome to the arts and
crafts section of Baumgartner Restoration, where I cut out this oval, check to see if it fits,
and then trim it until it does. Then I can transfer this outer shape, which is the outer
dimensions of the board, to the board. And then I have to start thinking about the inlay, or outerlay,
or extra piece of canvas that's going to go around the oval to make it an actual oval.
You see, this painting isn't an oval. It's kind of an odd hexagon-y type shape. And I want it to be
an oval so that it fills up the entire surface of the board and that there aren't gaps when it goes
into the frame. So I need to cut out a piece of canvas that's going to go around this painting
to turn it into an oval. And now I can start preparing the painting for mounting to this board.
Because there's such a big inlay, or outerlay, I need to apply something to the back of this
canvas to make sure that the registration doesn't go haywire during handling and mounting. And so
I'm using a flat-spun nylon gossamer. And here I'm just painting on the adhesive as opposed to
rolling it because it's such a small painting, I don't think that the roller would give me accuracy.
I'm also using the same adhesive in a film form, and that'll get ironed onto the back of the board.
If I paint on the liquid adhesive to the board, it absorbs it too much,
and it won't really bond. So having the film ironed on is exactly what I need.
I'll peel off the outer film and then lay the painting onto the board, and then take it over
to the hot table where I will prepare it for the actual lining or mounting process.
And this is just like I do with any other painting. On canvas, I need to create an evacuation route
for the air that's going to get stuck in this envelope that I'm creating with here a piece of
non-stick mylar film so that it doesn't stick to the painting or the board. I'll add my thru-bag
connectors, turn on the heat and the vacuum, and then let the painting mount. After allowing the
painting to cool and then removing it from the hot table, I can begin trimming off the excess board.
Because remember, I don't need this as a square, I need it as an oval. So using a couple of
blades, I'll just slowly work around in thin passes until I've cut through the entire board.
And now I can fill in all of the losses. There are a couple of little spots on the painting itself,
but really I need to build up this outer edge where I did the inlay or outerlay or new canvas
because it's almost even but not quite, and I don't want a lip or a ledge that will catch the
light and then we'll see it. So using my fill-in material, I'll apply it liberally and then using
some cotton swabs, I'll remove the excess. It's not a terribly difficult process and for a small
painting like this, it doesn't take a ton of time unlike some of the larger paintings that I've
worked on, but making sure that we're smooth and even around the entire painting really does matter
even if most of this won't be seen. And then because there is so much retouching that needs
to happen on this painting on the perimeter, I'm going to coat it with an isolation layer or
saturation layer. Whatever we want to call it, it's a layer of synthetic resin that will help
even out the surface and assist me with the retouching. Now here I'm using a very very big
brush to cover up most of this area. I just need to get a lot of paint on this fill-in area quickly
and then once I've done that and covered up most of the area, I'll come back with a much smaller
brush and work on the details. And then I'll come up with an even smaller brush to work on the area
where we meet the original paint layer. I could certainly use a small brush for this entire thing
but it would just take so much more time and that's unnecessary. Now mixing these browns looks
really easy but it's really difficult. There are a lot of different colors here and one section is
unlike the next. This was all mixed on the canvas so it's particularly difficult to match these
colors and that's where having that synthetic resin layer really helps because all of these
browns are really rich and vibrant and I can see the different colors that compose them. When the
painting isn't varnished it looks really dry and flat and it's hard to differentiate let's say a
cool brown from a warm brown. I was lucky on this painting that the losses were actually pretty
minimal including on the face so I can come back with a very fine brush and just do a little final
touch-up. And here I'm just looking to get rid of any of the areas that are eye-catching and
damaging or any of the losses like right here. And in some sots like George Washington's hair
I just need to glaze in a little bit where it was skinned during the previous cleaning just
to complete the image. It's surprising that even sometimes the smallest paintings that don't look
like they have a lot of retouching can take a tremendous amount of time and this painting was
no exception. What I thought was going to take oh just about an hour took me several and I attribute
that mostly to those browns giving me a hard time. Of all the colors I have to retouch blacks and
browns are my least favorite. Give me a bright blue any day and I'll take it. With the retouching
complete I can apply the final coat of varnish and this is going to give us the ultraviolet protection
and give us the ability to change the sheen and make the painting look really really vibrant
and really good. This is a small enough painting that brushing it on is fairly easy
and then as the varnish dries and the solvent evaporates I'm going to keep
coming back and brushing it out so I can get a really beautiful satiny textured finish.
Before I can reunite this painting with the frame I need to spend a little time
working on the frame and that begins by removing all of this medium that was used
to compensate for the gaps because the painting didn't quite fit this frame. I need to remove this
a because it's junk and it needs to go but b because it takes up space in the rabbit and I
need that rabbit to hold the painting in place. I'll then come back with a couple of different
detergents and my neutral organic soap, a toothbrush and begin cleaning off this frame
and you can see it is really filthy. I'm also going to remove all the paper tape from the back
because I'm cleaning it and it may as well. I'll remove the old wire in addition and then I'll come
back and try to remove some of this overpaint from the original gold inlay. Now I'm hoping
that I can get all of this overpaint off but with my first pass of gelled solvent it's not really
effective so I'm going to have to re-gild this but rather than using gold I'm going to be using
dutch leaf and an oil gilding process which is a little bit more forgiving and much more cost
effective. So rather than using a bowl and water I'm simply painting on this oil size onto the frame
where the gold used to be. You can see it there where I was able to remove some of that overpaint
but ultimately there was nothing left. Once this size has been applied to the entire area that I
want to gild I let it dry for a couple of hours and it becomes a little tacky and then I can
transfer the dutch leaf onto my suede pad and begin cutting it to size. Now dutch leaf is much
more forgiving than gold leaf. I can actually pick this up with my hands whereas gold leaf would
disintegrate but the gilding process is largely the same. Using a gilder's tip and a little bit
of static I can pick up the pieces of the leaf and then lay them down onto the size. I'll tap
them into place and then move on to the next. Now oil gilding is, as I said, much more forgiving and
can be applied to any surface. Windows, metal, cars, you name it. You don't need an absorbent bowl like
you do with water gilding. This is a relatively small area to gild so it doesn't take much time
to apply all of the leaf and once I do I can come back and I can start tamping it down with a brush.
And here I just want to make sure that the entire leaf has contact with that oil size.
Once I'm satisfied I can then start really working it into place with a cotton ball
and then ultimately I can start removing the excess just by brushing it off. Now this leaf is
not going to be burnished to a high sheen. You can't really do that with oil gilding and dutch
leaf. That needs gold and a proper water gilding technique. But one of the things that I noticed is
this gold is a little bit too yellow for my tastes so I'm going to tint it with a little
bit of shellac and I'm adding a little bit of dye to the shellac to make it a little bit warmer.
Give it an orange amber color. Once I'm satisfied with that color I'll then apply it with a brush
to the leaf and change the color. I can do this as many times as I need to get the color that I want
and you can see that it doesn't make the gold look cloudy or anything other than a little bit
richer in color. I could do this with any color blue, green, red, purple, but here I've chosen to
use a warm amber color to better recreate the look of actual gold. Once that's complete I'm
going to come back and paint in the black area of the frame where it was abraded and scratched
and rubbed off. This also allows me to give a nice crisp edge to the transition between the gold and
black. And then, last but not least, I'm going to add a little bit of foam tape to the inside of the
rabbit so when the painting is set in the wood doesn't scratch or otherwise damage it. And this
is double-sided foam tape that's archival. It's meant for use in conservation so it's absurdly
expensive. I'm sure that there is a more cost-effective solution found in any other industry
but this is what we're going to use today. We could use felt or paper but here because it's
an oval this flexible foam tape is ideal. And now I can finally transfer the painting to the frame
and you can see with the rabbit clear of all that gunk the board that I cut to fit, well, fits right
in. And rather than using framer's points or nails I'm going to use offset clips and then I'll add my
label on the back and fill out the inventory number, the date the painting came in, what varnish
and retouching medium were used, and then we're done. A diminutive painting of a grand man and
what looked like a simple conservation from the outset turned out to require the use of some
fairly novel solutions, namely the use of a laser. And while this isn't a tool that I would recommend
or prescribe for every painting, for this one it was just the ticket. That stubborn varnish required
solvents that were too aggressive for the underlying paint layer which was fairly vulnerable
and fugitive. And so facing the problem of not being able to remove the old varnish or risking
damaging the painting while doing so, my hands felt tied until I turned to technology. And here
the use of the laser to compromise the molecular structure of the varnish and enable me to remove
it with a much more mild solution was just the answer. I was able to go across this entire
painting, break down that varnish layer, and then lift it off without doing any damage to the
underlying painting. The frame wasn't in terrible condition but it was filthy, needed a really deep
cleaning, and also a little bit of attention where poor decisions had been made in the past, namely
painting over the gold. And while again we had to take some novel approaches using dutch leaf instead
of real gold, the end result is just as grand as the man who resides within its borders. And while
this painting was no doubt a copy of a larger more famous portrait of George Washington, it's still
pretty regal in its own right. At least now it is, that it's been fully conserved. These are the types
of projects that really get us excited. Complicated problems that require novel and innovative
solutions. This is what makes our work so fascinating and so interesting from day in to day out.
